How to Hang Tools on the Wall in the Garage: Best Ideas + Storage System Building Instructions

Interior decoration

A garage room is always an increased danger, since fuel and lubricants and often welding machines are stored in it. Therefore, certain conditions apply to finishing materials.

Most importantly, they should be:

• fire resistant;
• durable;
• resistant to various factors.

Moreover, the finishing material should be easy to clean and not absorb odors. Not all materials have these qualities.

Suitable building material:

• plaster mixes. An ideal base, will hide all the bumps and defects of the walls.
• Thin sheathing board (lining).It is used for both interior and exterior decoration.
• Tile. Here you have to work hard, and the cost is not suitable for everyone. At the same time, ceramics is a profitable option. It is non-flammable, easy to clean and durable. If the walls of the garage are tiled, you can forget about repairs for many years. Decorating a garage

Planning the area of ​​​​the garage always makes you think. Especially those who keep order in everything. It will not be difficult to equip a garage with your own hands if you know some tricks in arranging work areas. It is always possible to allocate some space for the necessary tools.

DIY garage ideas are so diverse that you can discuss it for a long time.

If you are repairing your car yourself, then you just need a workbench. It can be made from wooden bars of the required parameters. But the countertop must be made of metal.

Great importance is attached to the location of shelves and racks. They are given the main place in the room. It is preferable to install such structures along the walls. The photo shows options for arranging a garage.

Inscriptions and original stickers will help you place all items by type.

Small metal parts will always be in place if placed on magnetic tape.

Hanger hooks can be made from old wrenches. They will perfectly accommodate a rubber hose, or overalls.

Old plastic jars are great for storing nails, screws, and similar small items.

A distribution panel, like an organizer, will become a pride and stylish decoration of your modern garage box.To do this, it is necessary to fix a metal sheet with through notches on the wall and put hooks into the holes. From now on, all the tools and items that you use most often will always remain in sight.

Bicycles and other sports equipment always occupy a certain area. They can be hung on strong brackets. So you save square meters and achieve order in your small area.

This is interesting: Sectional doors - advantages and disadvantages

7 Simple designs for cutters, keys, files and fasteners

To make the workshop in the garage look neat and the master could find the tool and fasteners he needs at any time, we will construct several simple and convenient hanging structures. We prepare a thick foam and attach it to the wall on a plywood substrate 3 cm thick. We fasten both parts together with liquid nails or PL 500 mounting glue. We wait a few hours until the structure is firmly set. Due to the porous structure of the foam plastic, sharp and rotating objects easily enter and are firmly fixed in the material. We insert bits, drills, cutters, crowns, keys, screwdrivers, awls, hubs, files into the foam. The ideal place for the foam panel would be the wall above the workbench. If a perforated screen does not hang over it, this is a good option to diversify the interior and concentrate cutting tools in one place.

Simple designs for small items make it easy to find the part you need

At the wall next to the power saws, make a small stand for storing grinding wheels and cutting discs. Take ordinary disposable or old plastic plates, cut them lengthwise into two equal parts. You will get semicircular pockets.We seal the cut edge with tape, hiding and decorating sharp corners. We repaint the stands with a spray can in the desired color and fasten them to the wall with bolts in three places, from below and on the sides. Storage pockets are ready, insert grinding wheels and saw blades into them.

So that containers with nuts, bolts and self-tapping screws do not clutter up the workspace, use the idea to create suspended structures. For the first option, prepare plastic jars. Remove the cover and attach it to the wooden shelf with self-tapping screws. Fill the jars with fasteners and other small items for work, screw tightly to the lid attached to the shelf. The number of designs depends on your needs. Hanging storage jars can fill the entire bottom of the shelf. This design saves usable space and is very practical.

We make another original mini-rack for storing small things in the garage from food containers on a magnet. Using super glue, attach a round magnet in the form of a washer to the bottom of the container. We attach a wooden rail with magnetic stripes to the perforated screen. Inside the containers we store screws, nuts, bolts, self-tapping screws and other little things that are lying around in the drawer of the workbench. Hang the boxes on a magnet.

Useful tips for arranging space in the garage

Since the garage is intended to be a home for cars, care should be taken to ensure that the place for tools is well organized. Also, there will probably be several square meters in the room in order to take out some of the items from the apartment, so as not to clutter up the living space.

When installing various devices in a room, it is important to consider that all available equipment is at hand. To do this, you can use the following recommendations:

Regardless of the size of the garage, it is important to have a rack with shelves on which you can put tools, materials and useful little things.

If there is a desire to carry out current car repairs with your own hands or perform other repair work, then you definitely need to make a workbench in the garage.

For a car overhaul, you should make your own cellar - it will not only allow you to regularly inspect the mechanism, but also provide additional storage space.

Finally, for a garage it is quite possible to equip it for your own small workshop, for which you can also make accessories with your own hands.

The rational organization of space in the garage creates many tangible benefits:

• it becomes possible to independently carry out small-term repairs of auto parts and other mechanisms, due to which you can significantly save money;
• convenient placement of tools significantly speeds up the progress of work and saves time;
• the creation of additional places for storing tools, old things, clothes makes it possible to unload the apartment from things that are rarely used in the household;
• finally, the thoughtful internal logistics of the premises allows it to maintain its attractive appearance and avoid clutter.

Ways to build a basement in a garage

The basement is a real lifesaver for garage owners

The basement in the garage is not an essential room, but it always helps the car owner. The basement can perform several tasks:

• be one of the functional areas (mini-warehouse, storage place for large tools, workshop);
• serve as a grave.

The main problem in the basement arrangement is the elimination of dampness. Forced or natural ventilation of rooms below ground level is not always effective. It can solve the problem of dampness only in the case of building a garage on a hill or the presence of sandy soil or sandy loam on the site. In all other cases, high-quality waterproofing is required.

Basement walls are strengthened in several ways:

• concrete, constructing formwork;
• sheathed with boards;
• laid out with bricks.

There are several ways to arrange the floor in the basement:

1. Set aside earthen or form an adobe layer.
2. They make backfilling from gravel, crushed stone or expanded clay.
3. Concrete.
4. Lined with bricks.
5. Mounted on logs sheathed with larch boards. This wood has a high degree of moisture resistance and is not subject to decay. Between the boards leave gaps 5-10 mm wide to ensure ventilation.

Particular attention is paid to the device of the upper floor, since it serves as the floor of the garage, and the car will be on it. Recommended mounting methods:

Recommended mounting methods:

• installation of a reinforced concrete slab;
• laying I-beams with filling the space between them with concrete blocks.

In the basement, forced or natural ventilation must be arranged. The first differs from the second in the presence of an exhaust device (fan) in one of the pipes.

Cellar arrangement

It is desirable to make a cellar below the basement - so that the temperature for storing salting is optimal

All recommendations regarding waterproofing and installation of walls and ceilings of the basement fully apply to the construction of the cellar. These rooms differ only in purpose. The cellar may be on the same level with the basement or below it. The second option is preferable, as it provides a lower temperature in the food storage area.

The walls and ceiling of the cellar are pasted over with foam, creating the effect of thermal insulation.

Thus, temperature stability is achieved, which is important for long-term storage of food. Styrofoam prevents freezing of concrete in the cold season

In the absence of insulation, condensation forms on the ceiling, leading to waterlogging of the air and dampness of walls and ceilings.

It is desirable to make a chest for vegetables wooden, since wood is the most favorable, “breathing” material. Shelves for preservatives and bags of bulk products can be metal. Lighting is necessary in the cellar, therefore, electrical wiring is being installed.

Garage electric lighting

Improvement of the garage space includes high-quality lighting. It can be minimal lighting or capital lamps. The location of lighting devices and their power depends on the frequency of use of the building, as well as the type of work carried out in it. The electrification of utility rooms is a whole range of activities. The installation plan consists of the following steps:

1. Installation of a power cable inside the garage;
2. Switchboard installation;
3. Choosing a place, placing sockets, switches, lighting fixtures;
4. Grounding.

Any type of device can be used for electric lighting. Suitable simple incandescent lamps, energy-saving, halogen, fluorescent lamps.Any model must be installed subject to certain rules. Light fluxes should evenly cover the entire area. It is better to manage them on a modular basis, creating a separation of zones. You can put a small lamp of a suitable design on the table, put LEDs on the ceiling.

 

Layout or how to equip a carpentry workshop in a garage near the house

If at the beginning of the organizational measures all the above requirements were taken into account, then there will be enough space for all the zones necessary for work:

• Racks for tools and blanks.
• Machine area.
• Place for assembly table and workbench.
• Compartment for storage of cleaning equipment.
• Waste storage tank.
• Hinged structures for storing hacksaws, tape measures and other things.
• Storage space for lumber and finished products.
• Hanger or wardrobe.

To save some space, many craftsmen make folding workbenches. Here is a direct answer to the question of how to equip a small carpentry in the garage, because such equipment allows you to freely park a private car here. Dimensional objects are best placed along the walls or, if possible, mounted directly on them.

To determine the minimum free zone near the machine, you need to multiply the area occupied by the machine itself by two. Tools that are used together in a flow chart should be located next to each other. In general, the basic rules for organizing the workspace are as follows:

• Any workbench or machine must have free access from three sides.
• The floor must be level and dry, and only non-slip material should be used as a surface.
• For garbage, two containers are needed: one for sawdust, and the other for the rest of the garbage.
• The first-aid kit and a supply of water are placed in a conspicuous place.
• The empty space of the carpentry should be larger than the area occupied by machines and racks.

Important! In the process of work, do not forget about personal protective equipment: goggles, a respirator, overalls must be available

Zoning and organization of space

The garage building cannot be called spacious. To facilitate access to the necessary items, to freely leave the car for storage, it is necessary to correctly delimit the space. Zoning is recommended according to the following principle:

• Passage space - the zone is always free to move;
• Easy access area - for storing frequently used items;
• Place for bulky items - under the ceiling on the mezzanine you can place suitcases, New Year's decorations;
• Essentials - arrangement of garden tools, rags are made at the very entrance to the garage;
• Work area - in a mini-workshop it is appropriate to put a table, chairs, necessary tools for your favorite activities.

Interior arrangement of the garage

There can be many ideas for arranging a garage, but you can significantly narrow the range of possible options based on the requirements for the room. Additional shelves and racks will help in arranging the necessary and not very things.

In rooms with a small area, the main tips for arranging concern the walls. By installing various hanging systems, shelves or hanging cabinets, you can expand the area of ​​\u200b\u200bthe working area. They can be placed under one wall or in the shape of the letter “P”, if the area allows.

Ventilation scheme.

This is a good option for those who are going to make a part-time garage and a workshop. Also, lockers will help to avoid moisture, distribute among storage items and maintain order in the garage.

Instead of racks for tools, it is better to make a hanging stand. They can even mount vehicles like bicycles, as well as wheels and other items that require a special way of storage.

If the garage will or already has a large area, you can think about a recreation area. Functional areas are protected by various design techniques in the form of curtains or partitions. In the recreation area, you can put a prefix, a table, organize a place for gatherings with friends.

It is possible to organize a bathroom and, for example, install a gas unit, which is often used in cases of a private house.

An important point in the internal arrangement of the garage is heating. Recommended if possible install purchased or self-made bake. In winter, it will help warm up the room for work and help eliminate moisture.

Features of the arrangement of the garage

The garage space is usually not too large, but has some features that need to be considered. Initially, it is desirable to create a project, or at least a detailed plan, and then make a "marking on the ground" - to outline on the floor, walls, where and what will be placed. When designing, the height, length, width of the room, a list of items that should fit here are indicated. “Push off” should be from the place where it is most convenient to park the car - nothing should prevent its entry and exit.

Gates are also an important element, they are installed as tightly as possible; additional space will have to be allocated for opening some types of structures. The width of the aisles between all the items in the garage is made sufficient for easy movement.

What other elements can be placed in the garage space:

• basement, viewing hole;
• mobile overpass;
• cabinets, racks, shelves for storing various things, tools, materials;
• tables, workbenches;
• hoist crane with winch;
• lathe, drilling machine;
• miniature sawmill;
• stands for wheels, tires;
• lighting fixtures, heaters;
• water pipes;
• compressor;
• welding machine.

4 Workbench - preparation of the workplace of the master

One of the main elements of arranging a garage is a workbench.

This is the workplace of the master, which is given special attention. Before designing, we calculate the free space and draw the project according to it

We weld the frame of the workbench from profile pipes and metal corners. The average height of the workbench is 0.9–1 m. This parameter depends on the height of the master and preferences to work sitting or standing. After assembling the frame, we cover it with an anti-corrosion primer. We lay the base of the countertop from a thick board 7.5 cm thick. If there are no boards, we fasten 7 sheets of thin plywood together, seating them on PVA construction glue. After fastening the sheets, we put them under the press so that they are finally fastened together. We cover the base of the countertop with a metal sheet 5-6 mm thick, cover it with an anti-corrosion primer.

The workbench is the main workplace of the owner of the garage

We cut off the excess parts of the sheet with a grinder or a metal file and finally attach it to the screws, drilling holes for fasteners in the wooden base of the countertop. Such a surface is suitable for both carpentry and locksmith work. If desired, we equip the workbench with retractable or sliding cabinets with shelves. We hang a perforated screen on the wall above the workbench. Here you can hang the tools that you most often use in your work, providing shelves, hooks for them, as well as home-made designs for nuts, bolts, self-tapping screws.

Storage areas, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and car equipment. It should be noted that the most bulky parts of the car are sets of winter / summer tires, depending on the season.

Tire storage rules

It is more convenient to store wheels on brackets of the following design:

• two triangular frames from a corner, connected by jumpers from any rolled metal;
• triangles are attached to the wall, the wheels are installed perpendicular to the supporting structure, slightly falling between the jumpers.

Wheel storage brackets

This is the most economical option for storing rubber in the off-season. The most demanded by motorists are straight and corner workbenches. The lower space is usually filled with shelves or drawers; grinding machines and a vice are located on the table top.

Homemade garage workbench

An example of organizing a corner workplace

A folding workbench can be very convenient

Wood is a versatile material for both workbenches and shelving.

It is easier to build a wooden workbench on your own, but it has a smaller resource than an analogue from rolled metal that needs to be welded. If corners for shelves are not laid in the load-bearing walls during construction, it is easier to make racks from rolled metal or lumber.

Homemade garage shelving

Use for glass bottle racks

Built-in wardrobes are very compact

Original hanging shelves are suitable for storing long items

The design and layout of shelving inside each garage is too individual to follow general guidelines.

Furniture selection

The amount of furniture depends on the area of ​​​​the garage building and its need. Conventionally, it can be divided into tables and racks. The configuration of such items is directly affected by the specifics of the planned work.

Special furniture for an outbuilding is not distinguished by style and pomposity. It is usually made of durable metal. Open structures allow you to store heavy loads. It is appropriate to place tools and consumables in closed cabinets and drawers.

In the workshop garage, you can equip a workbench and other useful headsets. On special installations it is convenient to carry out carpentry, locksmith work. They are equipped with tool holders, special lamps, metal surfaces that are not afraid of any scratches.

How to equip a garage inside: layout, decoration, storage systems

We will send the material to the mail

The garage is necessary for the storage of vehicles. But if it is properly equipped, it can also become a storage for tools and inventory, a pantry, a workshop.In this article, we will talk about how to arrange a garage so that it becomes a comfortable multifunctional space with a stylish masculine design.

Well equipped garage

The process of interior arrangement of the garage space should begin with the development of the layout of the garage. This is necessary in order to properly distribute the available space. First of all, of course, you need to mark the place for the car. Then the location of the racks for storing all the necessary automotive equipment is determined. The rest of the space can be filled as you wish.

At the same stage, it is worth deciding on the color of the finish. It is better to make the walls light so that the garage does not seem too cramped. In addition, light shades of the interior will smooth out the shortcomings of the technical room. Against the background of light surfaces, shelves with tools and spare parts will look less messy.

Light finished garage

Gates

In arranging a garage, it is important to pay great attention to what will connect it to the outside world. It is necessary to take into account all possible obstacles for entering the garage for further installation of the gate. Gates, first of all, serve to protect the premises from penetration, and also retain heat inside

Gates, first of all, serve to protect the premises from penetration, and also retain heat inside.

Types of garage doors.

There are the following types of gate construction:

1. Swing. The cheapest and easiest option.
2. Lifting. The gate rises into a special collection, allowing you to save the area inside the garage and not take up space on the street.
3. Multisectional. The door leaf consists of several sections. When opened, they gather and rise to the ceiling with the help of a spring seat.They save space and create good tightness.
4. Rollback. Open to the side like a wardrobe.
5. Roller shutters. Similar to the sectional version, but the gate itself is divided into many parts that come together and rise up. Most often, the mechanism is located inside the gate itself.

We must not forget that the gate is designed so that the car can easily enter and leave the garage. The gate is best treated with silicate paint, which protects the room from moisture penetration, and also preserves the material from corrosion.

1 Zoning of the premises - we divide the garage into functional areas

If you are starting a project from scratch or are thinking about redevelopment of the garage, a good option for building is a two-tier space zoning. On the top floor there will be a workshop, in the bottom - a basement and a pit. We will analyze an approximate plan for the location of zones in the upper part of the garage, taking into account the convenience and specifics of the room.

Zone No. 1 is transitional. Equip a place for items that you will need when you leave the room: racks for outerwear and shoes, a shelf for keys, a mobile phone, bags. The transition area should be close to the door, not cluttered with the work platform, racks and other items.

Zone number 2 - for household items. This space can be organized to store items that you need in everyday life. If you have pets, construct a small rack for food, canned goods. Make a shelf for newspapers, a coffee machine, an electric kettle and a microwave. The site can also be used for storing things in bulk that do not fit in the cellar.

Zone No. 3 - shelving.There may be several sites for mounting high racks, depending on the area of ​​\u200b\u200bthe workshop. We store garden tools, spare parts, equipment for work in them.

Zone number 4 - auxiliary. Here we store large items and things that you rarely use. For example, leisure equipment, holiday decor. Optionally, the corner can also be equipped with a rack for storing summer and winter tires.

Zone number 5 - a sports corner. Take a place for bicycles, roller skates, scooters, make a net for balls. Provide hooks, holders and nets for them so that nothing rolls and stays firmly in place.

Zone No. 6 - workspace. Equip this area with maximum comfort. Provide a universal workbench for gardening, woodworking and auto repair, convenient sliding cabinets, shelves for storing small items. And don't forget lighting. The window will be a big plus, in its absence, use artificial lighting by connecting several 60 and 80 watt lighting lamps.