How to clean the toilet with a cable: choosing a tool and instructing on its use

How to use the tool

• We will work with hard metal, so the presence of strong mounting gloves is a must. Also dress in sturdy work clothes.
• If tips are attached to the tool, use one of them according to the manufacturer's instructions.
• Do not unwind the sewer cable all at once, it must be kept coiled and straightened only to the length of the immersion.
• Choose the direction of rotation with which you will move deeper. It must not be changed during the process in order to avoid a rope wedge.
• When the cable hits a dead end, it will become harder to turn it. You'll have to work hard, maybe even get it several times and clean the tip of dirt.
• When returning the cable back, do not change the direction of rotation originally adopted.
• When the blockage is broken, finish cleaning by washing off the remaining debris with a large pressure of hot water.
• The device is taken out, thoroughly washed under hot water with a brush and soap, then washed with warm water.
• After completely drying it, roll it into a ring and return it to its storage place.

video instruction for cleaning with your own hands, how to clean, remove plaque, photo and price

A clogged toilet bowl is a fairly common and at the same time very unpleasant phenomenon. Many people in such cases turn to the help of plumbers, but this is associated with additional costs and, most importantly, loss of time. Therefore, it is more expedient not to wait for the arrival of specialists, but to fix the malfunction yourself. Below we will look at how to clean the toilet bowl at home, and you will see that there is nothing complicated in this.

Clogged toilet

Blockage analysis

To decide how to clean the toilet at home, you should find out how seriously it is clogged and, if possible, find out the cause of the blockage. Water can pass gradually, in a small trickle, or not pass at all. It is not difficult to find out - you need to pour about a liter of water into the toilet and see if it has gone or not for half an hour.

Then you need to determine how local blockage. To do this, open the taps in the kitchen and bathroom. If from both points the water leaves in the usual way, then the blockage has occurred at the outlet of the toilet bowl.A weak runoff indicates that a traffic jam has arisen somewhere in the general system; accordingly, more serious measures will be needed to eliminate it.

Options for clearing minor blockages

mechanical way

If some large object, for example, an apple or a rag, got into the toilet bowl, then first of all it is necessary to examine the siphon and the place of release.

This is done in the following way:

• First of all, you need to scoop water out of the toilet.
• Then you need to put on a rubber glove on your hand and feel the drain as deep as possible. It will not be difficult to pull out a rag with your own hands, and a stuck fruit or vegetable can be pry off with a wire.

In cases where the cause of the blockage is not exactly clear, you can try to eliminate it with a plunger.

Cleaning with a plunger

Instructions for using the plunger are as follows:

• If the water from the toilet is scooped out, it must be filled so that the level covers the rubber pear of the device.
• Further, it is desirable to close the place of the upper and lower drains in the bathroom, as well as in the sink and other plumbing fixtures.
• Then the plunger must be installed above the drain and make several active strokes.
• If the water does not go away after that, the procedure can be repeated several more times.

As a result of the pressure of water and air, the cork in most cases collapses or moves into a wider pipe.

In the photo - soda with vinegar can eliminate blockages

Chemical method

If cleaning the toilet bowl at home by mechanical means did not give positive results, then you should try to destroy the blockage with the help of chemicals. The easiest way is to use the ingredients that every housewife has in the kitchen:

They are applied as follows:

• First you need to scoop out the water in the drain.
• Then you need to pour out the soda and push it as deep as possible.
• Next, you need to pour a glass of vinegar.
• After the end of the reaction, pour boiling water into the toilet bowl.

A more expensive way is to use special products such as Tiret, Mole, Mister Muscle, etc. The price of these products is quite affordable and you can buy them at any store selling household chemicals.

Sewer cleaner mole

Plumbing cable

Eliminate severe blockages

If none of the above methods helped to cope with the blockage, then there is only one way to clean the toilet bowl at home - use a plumbing cable. It is this device that is most often used by plumbers.

The cable can be purchased from a specialized store. Considering that blockages in the sewer are not uncommon, this purchase will be useful.

Breaking through the toilet with a cable is not difficult, however, it is advisable to do this work together. In this case, one person pushes the cable into the sewer pipe, and the second rotates the handle of the cable. In this case, it is necessary to ensure that the cable is always in a taut state, otherwise it may twist and further work will be impossible.

When the cable reaches the plug, it should be turned and made several translational movements, as a result of which the blockage will collapse.

That, in fact, is all the "wisdom" associated with cleaning the toilet.

Conclusion

As we found out, everyone can clean the toilet on their own.The only thing is that some devices will be needed for this, but if you spend money on them once, in the future this procedure will not require costs.

See the video in this article for more information.

Folk remedies

If there were no household chemicals in the house, folk remedies will come to the rescue.

What kind of blockage?

How to remove sewer blockage at home depends primarily on its nature. In order of decreasing frequency of occurrence of clogging of household sewers, there are such types:

• Fat plug - kitchen residues cemented with fat and particles of household dirt;
• Hair, animal hair;
• Pellets of pile fabrics;
• Foreign water-insoluble or swelling objects and substances: coins, badges, food leftovers, paper, fabrics; in the local street sewerage - the roots of plants sprouted into the pipes;
• Solid deposits on the walls of pipes;
• Abundant fecal matter and toilet paper.

The fatty plug develops within 1-5 days, while the patency of the sewerage gradually decreases. If, while the drains are still leaving, let hot water run for 5-15 minutes, the permeability improves, but then drops again. Symptoms of clogged hair and lint are similar, but they develop more slowly, up to 3-4 weeks. Hair, as a rule, is also visible on the drain. If at the same time the water seal (siphon) is not cleaned of hair, but simply pierced with a plunger, hair blockage provokes the formation of a dense, extensive and intractable fatty plug.

Blockage with foreign objects develops suddenly.Complete or, more often, partial obstruction of the sewer after this remains stable for a rather long time, until fluff collects in front of the obstruction and / or a fatty plug forms. It often occurs in systems from old ones, with a pipe clearance reduced from deposits.

Poor drainage due to deposits in the pipes develops very slowly, over the years, so that the residents usually have time to get used to it, but can cause a disgusting emergency blockage with feces. Fecal blockage occurs suddenly, most often in 3 cases. The first is when a toilet connected to an old sewer is used intensively by a large number of people, for example, during a crowded festival with plentiful refreshments. The second - under the same conditions, foreign objects got into the system and got stuck in the riser. The third one, a crazy cunning neighbor from below, put a catcher pin in the riser. Which, by the way, is strictly prohibited and threatens him with serious sanctions in addition to compensation for damage to the victims.

Causes of blockage in the toilet

A blockage in the toilet is some kind of obstacle or barrier that prevents the passage of flushed water and waste products. There can be several reasons for a clogged toilet:

• Wrong installation. If the outlet pipe angle is incorrect, the drain clearance is significantly reduced or forms a strong bend, as a result of which waste accumulates and, over time, grows on top of each other, leading to a complete obstruction of the pipe.
• Cat filler. Due to its structure, the litter absorbs liquid and turns into a cement-like consistency, which is why sewer pipes are so easily clogged from cat litter.
• Trash. Throwing everything into the toilet, sooner or later it will become clogged, since the drain clearance is simply not designed for such waste. The only thing that can be thrown into the toilet, in addition to liquids, is toilet paper, which completely dissolves in water.
• Organics. Pouring out soups and pieces of spoiled dishes can bring the matter to a blockage. This is due to the fact that pieces of food can gather in one place and close the passage. In addition, fat from food, insoluble in cold water, forms a film on the surface of the drain, which grows and increases each time, thereby also leading to clogging.

No need to bring this work of art to the handle

Cleaning the toilet begins, for now, with the most harmless material - soda

First you need to determine the cause of the blockage and its location.

The reasons

Among the reasons, we define three, the nature of which, however, is the same - our disregard for the house, our own or someone else's, is not so important here:

• Firstly, we ourselves threw in potato peels, peels from watermelons or melons, dropped rags or a whole roll of toilet paper.
• Secondly, we have hired such builders who do not care what opinion they will leave the customers with. Completing the work, they decided to solve the problem of cleaning up all construction waste radically - through the toilet;
• Thirdly, you are out of luck with neighbors who do not hesitate to throw everything that has got into the toilet instead of taking the garbage out into the trash can.

Place

Only in the latter case, the place of contamination will be practically inaccessible to you - it is already in the communal sewer, and the problem of how to clean the toilet bowl disappears by itself for you, you will have to contact the housing office.

In all other cases, five places of accumulation of garbage are possible:

• in the primary canal to the siphon;
• in the siphon (place “A” on the diagram);

You can also clean the toilet bowl with a publicly available “punch” called “plunger”

• in the channel before exiting the sewer pipe;
• at the junction of the toilet with the sewer (in the diagram - B);
• at the junction of the house pipe with the house collector.

How to clean a clogged toilet bowl 4 recommendations

There are many reasons that can lead to sewer clogging. This may be improper use of the toilet: throwing garbage into it, waste after repairs or cat litter. But sometimes the sewer is clogged even without the "help" of the owners. Neighbors can also contribute. And sometimes a blockage occurs due to poor-quality, too hard water, which ensures the gradual deposition of plaque on the pipes. Then there is an urgent need to figure out how to clean the toilet yourself if it is clogged. Before analyzing effective methods for cleaning sewers, it is necessary to dwell on four tips from the masters.

1. Find out the cause of the blockage. Solving the problem must begin with asking all family members about the possible source of the problem. For example, a child may accidentally drop a toy into the toilet. In this case, half of the effective methods will be ineffective. To cope with such a congestion, if the object is far enough away, only a cable will help.
2. Determine the location of the plug. If the water does not go well in the toilet, what do the newcomers immediately decide? They assume that the blockage arose precisely in the toilet pipe and use all available methods to clean it. This approach is not entirely correct. After all, the congestion could have arisen much further, in the sewer pipe.To approximately determine the location of the cork, it is necessary to open the taps in the bathroom and in the kitchen. If the water drains normally and does not linger in the pipe, then the problem is really in the toilet plexus. But if the water quickly filled the pipe and leaves the sink very slowly, then the problem is quite serious, and it is better to use the services of a plumber.
3. Do not use a tank. To check how the water is leaving or to clean the pipes “under pressure”, do not use the drain tank. If the blockage in the toilet is too strong, then all the water mixed with sewage can pour out through the toilet directly onto the floor. Another unpleasant phenomenon is also possible. Bath and toilet are two communicating vessels. Therefore, dirty water, which is unable to eliminate the congestion, has only one thing to do - flood the bath. It is better to drain the water from the basin, strictly controlling the process of its outflow.
4. Urgently call a plumber. In some situations, even knowing how to clean the toilet if it is clogged, it will not be possible to achieve a positive result. If, upon opening the toilet, you notice that the water level is gradually rising, this means that a blockage has formed in the common riser. In this case, your toilet and sewer riser will become communicating vessels. Do I need to say that very soon all the sewage will overflow and fill the toilet? No cleansing measures will help solve the problem. Only a plumber can handle this plug, using special inspection hatches and a plumbing cable.

If the blockage occurs too often, then you need to pay attention to the toilet itself. Modern models that harmoniously complement the design of the toilet are not always suitable for installation in old sewer systems.

Therefore, when purchasing plumbing, it is important to pay attention not only to its combination with the overall interior, but also to the technical characteristics of the selected model.

Therefore, when purchasing plumbing, it is important to pay attention not only to its combination with the overall interior, but also to the technical characteristics of the selected model.

Rope nozzles: types and applications

Nozzles are needed in order to eliminate various types of pollution. They are of this form:

• hook. Helps to clean the pipe from hair and threads, pieces of fabric. Such nozzles will be able to pull foreign objects out;
• peak. It helps with “cork” pollution, because such a nozzle can break through the cork, and later the water will flush the pipe. With inept handling, such a nozzle can damage the pipe itself;
• combined nozzle. It is shaped like a mace and can handle any foreign objects in the pipe. It is more difficult to damage its walls, but the effectiveness is much less.

Any nozzle can be used in any situation, it all depends on the geometry of the pipe and the skill of the cleaner.

How to deal with a riser

Poor patency of a sewer riser that has been overgrown with plaque from the inside leads to emergency and very dirty blockages. However, do not rush to add up more than 5 thousand rubles each. from an apartment to replace the riser, start a rout in the house, lose amenities for quite a long time and then lay out even more for the repair of bathrooms. First, survey the old cast-iron riser: if it is not emergency, then it would be better to clean it from plaque. Cast iron, in addition to high corrosion resistance, also has excellent anti-acoustic properties.What does not emergency mean? Intact, without cracks, fistulas, rust streaks, traces of welding and / or locksmith work on it and with tight, non-flowing joints.

Methods for cleaning the sewer riser and external sewage

To clean the sewer riser, you will need a cleaning machine with a set of nozzles; it can be rented or hire a master who owns one. If the house is higher than 3-4 floors, then a manual machine can no longer cope, you need to use a mobile machine on a frame, manual or electric. Initially, the riser is passed (from the roof to the basement) with a 4-bladed serrated knife, and cleaned with a smooth sliding one, see fig. After cleaning, they are washed with a hose with a spray nozzle, on the right in fig. A cast-iron riser cleaned in this way will probably last no less than before. Many houses are known with quite serviceable cast-iron risers 100-120 years old.

***

2012-2020 Question-Remont.ru

Display all materials with a tag:

Go to section:

We eliminate the blockage with a corrugation worker

If the toilet is clogged, a situation may also arise when you have to disconnect the sewer pipe from the toilet. Using this method, you can not only effectively clear the blockage that may form in the bend of the toilet, but also get direct access to the sewer pipes. In this case, the plumbing cable can be guided directly into the pipe, which will facilitate troubleshooting work.

However, such work must be done with caution and with a warning to neighbors to ensure that there is no new portion of wastewater.

How to prevent a toilet that is often clogged

With proper care of the toilet bowls, it is possible to achieve a long absence of blockages. In addition, if modern chemicals are used for cleaning, this will also avoid contamination, and the owner of the plumbing is unlikely to hear anything about blockages. Here are some tips to help you get rid of bad breath and dirt:

• do not throw small debris into the toilet, which affects it negatively, clogging the sewer system (if dirt gets into the toilet bowl, be sure to remove it),
• occasionally carry out preventive cleaning of plumbing equipment and a water seal to help eliminate dirt,
• immediately clean the clogged toilet bowl by any means (both improvised and store-bought ones will do),
• wash the plumbing and drain system with hot water every week (especially for a heavily clogged device),
• occasionally pour any cleansing liquid into the bowl.

Clean the sewer system of the unit every month, provided that it is properly used. If the toilet bowl used to be often clogged, we eliminate and clean possible blockages every week - in a month the clogged appliances will be completely cleaned, and you will not have to flush it so often.

Features of using a plumbing cable

The toilet is clogged, how to clean it with a cable? It is more convenient to work with this tool together. So, one person should push the cable deep into the pipe with reciprocating energetic movements, and his partner at this time should turn the wire. If a plug has formed in the toilet pipe, then after a while the cable will rest against the existing obstacle.

In this case, you need to use reciprocating movements to try to push the blockage or take it out. In this case, if it was not possible to achieve the desired result the first time, it is necessary to repeat the procedure.

When performing such manipulations, it is important to ensure that the cable is in a taut state, since if it begins to twist inside the pipe, it will be impossible to continue cleaning. Moreover, in this case, there is a high probability of damage to the inner walls of the pipes.

Types of plumbing cables

There are four types of cables in building and finishing materials stores:

• spring, having a hollow and twisted wire spring;
• rope, made in the form of a long thin rod of several wires;
• spring-wound, equipped with a flexible core with a spiral wound on the outside;
• flat (tape), made in the form of a tape with a width of 1 to 4 cm.

All of the above types of plumbing cables are equipped with working elements in the form of a nozzle, handle, wire and tape, made of durable steel. There are models of cables, the spiral of which is covered on the outside with a rubberized sheath, which performs the function of protecting the inner walls of the pipeline from mechanical damage by metal.