How to clean the toilet with a bottle: a step-by-step guide + an overview of alternative methods

How to get rid of bad smell from the toilet

Reasons for the appearance

Most apartment dwellers use a compact toilet. The cause of the unpleasant odor in this case is often the incomplete flushing of the water. As a result, the liquid located in the toilet is mixed with water from the tank. At the same time, part of the fecal matter remains in the water. Because of this, the toilet room will smell bad.

Why is the toilet flush incomplete?

Firstly, it can become clogged in any area of ​​the drain as a result of deposits on the walls, various objects entering the pipes, and the disposal of products containing fat in large quantities.

Secondly, insufficient draining may be due to improper operation of the tank. Perhaps, when you press the key, the drain mechanism does not allow all the water to drain. In this regard, a complete replacement of water does not occur.

An unpleasant smell coming from the toilet may be the result of:

• depressurization of the junction of the toilet bowl and sewerage. This usually happens due to the drying of the putty or the aging of the cuff. In this case, to normalize the drain system, it is enough to replace the cuff and treat the junction with silicone,
• cracking or displacement of the connecting pipe-corrugation. When displaced, it is enough to “return” the pipe into place, but when it cracks, it will have to be replaced,
• malfunctions of the water seal due to various reasons. You can correct the situation by cleaning the fan pipe with boiling water or replacing the shutter. If there is a blockage in the water riser, only housing and communal services employees can eliminate it.

How to eliminate

How to eliminate the "aroma" from the toilet? First you need to determine the cause of this phenomenon.

If the urinary odor is the result of a blockage in any section of the sewer, it is enough to simply clean the pipes by removing the “plug” from them. Determining the blockage is easy: just watch the flushing process. If the toilet bowl fills up heavily with water that comes out slowly or incompletely, it means that salts have been deposited on the walls of the pipes.

How to get rid of the smell of urine in this case? The easiest way is to use a plunger. With it, you can create pressure that will help to completely eliminate the blockage.

If there is no visible result after using the plunger, you can use a special cable or pour a special chemical agent into the pipes.

A household chemical product designed for cleaning pipes is easy to purchase at any specialized point of sale. Use the product strictly according to the instructions on its packaging.

Sewerage problems that are accompanied by an unpleasant odor can be caused by incorrect operation of the drain mechanism. Determining what it is is very simple. You need to remove the lid from the tank, wait for the sound of water to stop and look at the amount of liquid in the tank. If it is incomplete, the float is incorrectly adjusted.

How to remove an unpleasant smell from the toilet bowl caused by improper operation of the tank? Most often, you just need to bend the float bar.

If problems with sewerage are caused by the deposition of salts and dirt in hard-to-reach places, then toilet bowl products will come to the rescue. For example, the well-known tool "Toilet Duck" with its unusual neck can "get" even into those parts of the toilet that are not visible to the eye, and clean them.

Prevention

Have you found out the cause of the unpleasant smell from the toilet bowl in the apartment? Take her away. Although, sometimes it is impossible to do it yourself. Therefore, to avoid many problems, it is better to follow simple preventive rules:

1. Only toilet paper can be thrown into the toilet. In no case should you throw food waste, newspaper pages, and even more so rags!
2. It is advisable to fix grilles on the drain holes, which will perform the filtering function. With their help, you can prevent foreign objects from entering the sewer.

Want to get rid of bad smells in your bathroom? You can help her on your own. Purchase a pipe cleaner and apply it as needed. And, of course, do not forget about compliance with the rules for the prevention of sewer clogging.

How to get rid of bad smell from the toilet How to get rid of bad smell from the toilet. Reasons for the appearance of a darling. Overview of elimination methods. Prevention of the appearance of stench.

Hope 2: unclog the toilet with a plunger

- Don't you have a plunger? Such a thing, for punching blockages in sinks and toilets. A wooden stick with a rubber cap on it. When you push, you get a vacuum shock that pushes the air. Under the influence of the blow, the blockage moves further along the pipe, breaking through the toilet, I advised.

How to use a plunger?

Information for those who have a plunger (an inexpensive and necessary thing) is available in the house. How to use a plunger to break through the toilet?

1. There should be some water in the toilet. As a general rule, if you are looking for ways to unclog a clogged toilet, water in the toilet is worth it.
2. The plunger must be placed so that it sticks as tightly as possible to the drain hole. This is necessary in order to get a strong push.
3. Press down on the handle of the plunger and pull it out as sharply as possible. Thus, you create water hammer.
4. Repeat the movements until the water begins to flow freely. As a rule, from 3 to 5 pushes are done in one approach.

Professional plumbers have pneumatic plungers that resemble a bicycle pump. They quickly and effectively remove the blockage by pushing it through the sewer system.For organic clogging, which was formed from food, piercing the toilet with a plunger is not difficult.

- I don’t have a plunger - I could try it. O! Let's call Sasha (our best friend and classmate). Still a man!

Lenka immediately grabbed the phone:

- Hello, Sanya, hello! Do you know how to unclog a toilet without a plunger?

Sewerage device

The sewer system of an apartment building was developed by engineers in the last century. The standard collector scheme in an apartment is a system for connecting all pipes into a single transport line, in which, due to the slope, the drains move by gravity to the house riser. Their further transportation from the house is carried out in the direction of a centralized collector. To ensure ventilation of the sewer system, the upper part of the house riser goes to the roof. At the lowest point of the apartment sewerage system, a tee is installed to enter the house riser:

• the diameter of one of the branches of the tee is 100 mm and a toilet bowl and a bidet are connected to it;
• the other two outlets have diameters of 50 mm: bathroom plumbing is connected to one of them, kitchen appliances to the other.

To prevent unpleasant odors in plumbing structures, a water seal is used. It is a water barrier that is formed in the curved channel of a technical device when filled with water. At the time of wastewater discharge, the hydraulic seal ensures the passage of wastewater and prevents blockages. After draining the water, the water seal is updated.

Most often, in the apartment sewerage system, the places where the wiring turns are clogged.To prevent blockages in the pipeline in problem areas, certain requirements must be met during the installation of the sewer system.

1. Pipes connecting the technical devices of the kitchen, bathroom and toilet with the input tee are installed at a slope towards the riser. This is a prerequisite for the uninterrupted passage of wastewater in the pipeline with a gravity sewerage system.
2. Pipe slope parameters according to SNiP:
   • for pipes with a diameter of 50 mm - 3 cm per meter of pipeline;
   • for pipes with a diameter of 50 to 100 mm - 1.5–2 cm per 1 m of the pipeline;
   • if the diameter is more than 100 mm, then the slope should be 0.8 cm per meter of pipeline.
3. In places where the wiring turns, it is not recommended to install pipes at right angles. Instead of one 90° gusset, it is advisable to make two 135° gussets. This design will significantly increase the throughput of the sewer pipeline and reduce the risk of blockage.

A water seal is part of the sewer system of an apartment that prevents the formation of blockages and unpleasant odors.

Why a home toilet can become clogged: the main reasons

Blockages in the toilet bowl and sewage occur for technological, mechanical or operational reasons.

1. Technological causes of blockage are associated with errors and inaccuracies in the design or installation of the sewer system. Such errors include: incorrect pipe slope, rectangular fitting, insufficient section of the connecting pipe, incorrect installation of the toilet bowl. It is possible to eliminate frequent blockages arising from technological errors only by re-installing plumbing and sewer pipes.
2. The mechanical causes of blockage are associated with the ingress of foreign objects into the water seal of the toilet bowl and sewer pipes. For example, it is unacceptable to throw paper, cat litter, leftover food, construction debris, and so on into the toilet. Observing the rules for the operation of plumbing, you can prevent mechanical blockage. To eliminate the blockage, mechanical cleaning methods will be required.
3. Operational causes of clogging are due to long-term operation of the equipment. When using a sanitary appliance, fatty deposits form on the inner walls of the toilet bowl and sewer pipes over time. Small debris, such as hair, tea leaves, etc., adhere to them, which increases the size of the build-up and thereby reduces the diameter for the passage of sewage. Accelerates operational clogging, such as pouring greasy liquids down the toilet. Blockage can be cleared using chemical, hydraulic, or mechanical cleaning methods.

Determining the location of the blockage

If the water does not leave only the toilet, then the blockage may be in the water seal or at the junction of the device with the sewer pipe. It is eliminated independently or with the involvement of a specialist of the management company at the expense of the tenant.

If the water does not leave all the sanitary appliances installed in the apartment, then the blockage is in the house riser. A sign of such a global blockage is the filling of the bath with wastewater from the sewer through the drain hole. Removal of blockage of the house riser is carried out by the emergency services of the utility company immediately.

Practical Tips

When carrying out the above manipulations, you should follow the rules:

1. When working with a cable that is very massive, beware of hitting the toilet with it. It may very well be that cleaning will turn into the purchase of new plumbing.
2. You need to pull out the cable slowly and with stops, during which it is advisable to immediately wipe or rinse it. All floor coverings in the toilet must be removed in advance.
3. If the blockage happened due to the fault of clogged pipes and there is a desire and free time, then you can remove the corrugation leading from the toilet to the pipe and clean it bypassing the toilet. At the same time, personally verify the condition of the pipes.
4. To find out the approximate location of the blockage, it is enough to drain the water from the washbasin or bathtub. If the water passes quickly, then the blockage has occurred inside the toilet. If the drain is slow, then either the riser is clogged, or all your pipes or siphons are clogged.
5. It will not be superfluous to carry out preventive work with a frequency of about once a quarter or six months at least. Especially if the pipes in your home are your peers.
6. A traditional plunger with a wooden handle can fail: the handle will remain in your hands, and the rubber part will get stuck inside the toilet. Make sure the fastening is secure.

Chemicals

The stores offer a wide range of different products for cleaning the toilet. During operation, safety precautions should be observed, since many preparations contain aggressive components. In order not to harm the technique, dosing is carried out according to the instructions.

"Mole"

The drug "Mole" helps to successfully get rid of the congestion in the toilet. The following characteristics are considered to be advantages:

• ease of use, it is enough to pour the required amount of substance into the drain hole;
• action starts quickly;
• acceptable price;
• the components that make up the product are able to decompose food waste, fatty acids, human hair;
• no dirt during operation.

Shake the liquid in the container before use, and then pour 200 ml into the hole. After 1.5 hours, the toilet is washed with plenty of water.

"Mister Muscle"

It is possible to clean the toilet with the help of Mr. Muscle. If the problem is minor, then the components cope instantly. They dissolve the organic cork and put the equipment in good working order. In other cases, it is worth pouring the product into the toilet and waiting 1.5 hours.

The product is available in the form of a liquid solution and powder. The price for one package is 120 rubles.

"Bagi Pothan"

The "Bagi Potkhan" tool works effectively. The drug is produced in the form of a granular powder. It contains alkali, which corrodes most types of blockage. Step-by-step actions will help you get only benefit from the procedure:

• water is drained from the drain barrel;
• 100 g of powder is poured into the drain;
• wait 3 minutes;
• pour in a small amount of water;
• again wait 3 minutes;
• at the last stage, drain the water.

The procedure will remove plaque on the pipes and congestion that has arisen as a result of the accumulation of debris.

Tiret Gel

It is good to clean the toilet bowl with Tiret gel. It contains chlorine and other active substances that remove the fat layer, organic plugs, kill fungus and other pathogenic bacteria:

• A certain amount of gel is poured into the hole and left for 5 minutes. If the blockage is strong, then the time increases to 20 minutes.
• Then pour 3-4 liters of boiling water.
• Wait another 5 minutes.
• If the water still descends slowly, repeat the procedure.

The tool is allowed to be used for preventive purposes.

"Sanox"

The drug "Sanoks" cleans the drain well, eliminating contaminants. The tool is distinguished by an affordable price, disinfectant properties, the ability to get rid of unpleasant odors and high efficiency.

Pour 220 ml of Sanoks into the hole and leave for 25 minutes. Then rinse the drain with plenty of hot water. Preventive cleaning of the toilet bowl with the use of the drug "Sanox" is carried out once every 18-20 days.

"Bio Favorite"

The Bio Favorit tool will help remove various blockages. Biocomponents destroy unpleasant odors, decompose various debris that has fallen into the pipes.

A certain amount of powder is diluted in water and added to the drain hole. Drain the water after 10 minutes. The procedure can be repeated in a month.

Biocomposition "Vantuz"

The tool effectively cleans sewer pipes, but its price, in comparison with other means, is high and amounts to about 500 rubles. As part of bacteria that quickly remove traffic jams:

• Dissolve the sachet in warm water.
• Pour the liquid solution into the neck of the toilet.
• Leave the remedy for 10 minutes.
• Then you should pour in hot water and drain the water in the tank.

The substance is harmless to the skin, quickly copes with congestion, odorless powder, it is permissible to use it for preventive purposes.

Deboucher

Cleaning sewer pipes without a plunger will help Deboucher. The components do not damage the surface of the equipment, eliminate unpleasant odors, and corrode organic corks. Pour 500 ml of solution into the toilet hole and wait 1.5 hours. In case of severe blockage, it is permissible to pour up to 1 liter of liquid and leave for 10 hours.

Selena Antiblock

The product is produced in granular form.The composition is odorless, does not spoil the surface of the pipes and copes well with congestion:

• Shake bag with dry matter before opening.
• Then the contents of one package are slowly poured into the drain hole, alternating with the pouring of hot water.
• Leave for 90 minutes.
• Then water is poured in.

Chirton "Clean gutters"

Chirton "Clean drains" helps against blockages. The action of the components included in the composition is instantaneous. The powder of one sachet is slowly poured into the hole and washed off with water after 15 minutes.

Prevention of blockages in the toilet

As a rule, mechanical blockages occur due to the fault of the household themselves. The use of plumbing for other purposes, the lack of preventive cleaning and leads to pollution.

In order to avoid this, follow the following rules:

• Do not flush anything in the toilet other than toilet paper, and then in small quantities.
• Do not dispose of greasy food waste.
• If there are children in the house, explain to them how to use the toilet.
• At least once every six months, perform preventive cleaning with hot water and soda.

If some elements of plumbing equipment are of inadequate quality, do not skimp and replace them.

These rules will help to avoid unpleasant surprises in the future and ensure the reliable operation of plumbing, which will save the budget on the services of professionals.

Hope 3: Toilet Blower Bottle

- What would you do without me? I know of course. Instead of a plunger, you can use a plastic bottle. It is better to take 1.5-2 liters. Listen carefully and remember if the toilet is clogged, how to clean it with a bottle:

1. Cut off the bottom of the bottle.
2. We lower the bottle into the toilet and make a sharp push.The action is similar to a plunger - a blow is created that pushes the blockage further along the pipes.
3. Repeat until the blockage passes through the sewer pipes.

Lenka quickly dragged the bottle, cut off the bottom and got to work. Push, push. Water from the toilet bowl scattered all over the toilet, but the blockage did not go away.
- Well, at least changed clothes, - Lenka summed up, examining her work clothes.

This method did not work for us.

“Are you sure that there is only borscht stuck there?” I asked. - It seems to me that he should have pushed his way through from boiling water.
- Vovka! Come on, come here! Tell your mother what you threw in the toilet? - my friend interrogated her son.
"Mom, won't you scream?" In the morning I cleaned the hamster's cage, and flushed the sawdust down the toilet. I thought they would pass, - Vovka prudently hid behind my back.

I will not tell you what Lenka wanted to do and how quickly Vovka disappeared. The toilet is clogged - how to clean it quickly - that's our task. What else can you try? Maybe fill it with something?

Clogged toilet: 8 easy ways to clean it yourself

The toilet bowl takes on a lot: spoiled seams and waste from the kitchen, construction waste, filler for trays - and you can’t list everything. In most cases, all this is successfully washed off, even if it is impossible to do so. However, as is often the case, the toilet bowl can become clogged from some little thing and at the most inopportune moment. And how then to clean it and not get your hands dirty?

Special cleaner

Such funds are relatively inexpensive, but the results are far from the best. Some are liquid, some are powders.They can handle food waste, hair or other organic matter. This is the easiest way to clean the toilet yourself, but far from the most effective. If after an hour or two after using the product, no results are observed and the toilet is still clogged, we move on.

We break through the blockage with improvised means

Often a blockage forms at the junction of the outlet and corrugations. In this case, you need to try to get rid of the cause of clogging mechanically. A rake, a stick, a long knitting needle, or even an unnecessary fork will do for this - it depends on what is at hand. In some cases, a regular brush will save you (read how easy it is to clean a brush). The next steps are simple: we put our makeshift probe deeper and try to punch a small hole in the blockage. It will be difficult to do this on the forehead, because we rotate the stick as varied as possible, that the water went deeper through the blockage and eventually pushed it out

We clean with a plumbing cable

Not everyone has this item, although, as practice shows, buying it greatly simplifies life in the future. The toilet gets clogged up from time to time anyway. Cables differ in length, diameter and material of manufacture. For household needs, the one that is cheaper will do. It is not difficult to use the cable: we lower it to the place of blockage and try to break through it. Compared to a stick, the cable is flexible so you can get further.

In general, a plunger is more often used to clear blockages in the bathroom or in the kitchen, but it will also work well for the toilet. The main thing is that the rubber part can close the hole and create the necessary pressure. Be careful not to push the cause of the blockage further.What to do if this happened - in the following way.

We use wire

Wire is more difficult. It makes sense to use it if the cause of a clogged toilet is a rag or any other similar object. At the end of the wire, you need to make a hook, and then use it to pick up the same rag and pull it out. In principle, it is undesirable to push and flush such objects - in the end, they can get stuck somewhere in the riser and cause a “fountain” for residents on the first floor.

We clean with our hands

The method, frankly, is not for the squeamish. We put on high gloves or, in extreme cases, a bag (or several) - and you can act. What and how to do will not tell, everything is clear.

Using a bottle

Everything is simple here. Efficiency also depends on the blockage. To do this, you need a plastic bottle with a volume of 1.5-2 liters. It is necessary to cut off the bottom from the bottle and with this part try to break through the blockage with force. Sometimes it helps.

Special valve

To be honest, we don’t even know what it’s called and whether this thing can be purchased in stores. A special sticker is attached to the toilet bowl, then the bowl is filled with water to the top. The sticker rises and creates pressure - that's the clogged toilet and cleared. Only one thing is interesting: what if this sticker fails?

If none of these methods helped to cope with a clogged toilet, most likely you will still have to call in specialists. We will not talk about the fact that it is better not to allow problems. Anything happens.

Clogged toilet: 8 easy ways to clean it yourself The toilet bowl takes on a lot, but sometimes it still clogs.We present 8 ways to clean a clogged toilet yourself with free or almost free methods.

General principles of sewerage

The sewer system consists of a riser and pipelines, which are designed to drain liquid effluents from plumbing fixtures. The riser is a large diameter pipe and is usually located in the bathroom.

Modern risers are more often made of plastic, but many homes still have cast iron pipes installed. The advantage of cast iron is strength, and plastic risers are less prone to blockages. Most often, old cast-iron pipes are clogged. There are burrs on their inner walls, which is why deposits form quickly.

To prevent air from the sewer from entering the room, a siphon is provided in the design of the toilet - a bend where a water plug (water seal) is constantly located. When drained, water displaces and replaces this plug, pushing sewage from the toilet bowl into the sewer riser.

If there is debris in the pipe and the water has not squeezed it into the riser, a blockage may form. Scraps of paper, waste, hair, threads are caught on sharp or large objects. Gradually, all this turns into a large lump of dirt, which narrows or completely blocks the pipe section.