How to clean your bathtub drain and sink

How to clear a blockage in the bathroom?

There are several cleaning methods you can use to clear clogs at home.

Mechanical Methods

Mechanical methods include cleaning the pipes in the bathroom with a plunger, vacuum cleaner or cable. If the plug does not disappear after using these tools, you will have to disassemble the pipeline to get to the blocked place.

plunger

One of the oldest ways to clean drains is to use a plunger. The tool is a wooden or plastic tube, at one end of which there is a special rubber nozzle. With the help of translational movements, a person builds up a lot of pressure in the pipeline, under the influence of which it is possible to clear the blockage in the bathroom.

Cable

Chemicals or a plunger are far from always able to destroy a plug that has formed deep in the pipeline. For this purpose, a cable is used. It is used to clear the blockage in the pipe. A drill is fixed at one end of the cable, a handle is fixed at the other. Its length does not exceed 10 meters.

The cable is slowly pushed through the pipe until its end rests on the cork. Then it breaks through with pushing movements.

A vacuum cleaner

You can clean the drain in the bathroom with a vacuum cleaner. However, this requires a device with a blowing function. To fix the hose in the drain tube, you need to wrap it with a rag.

Household chemicals

When a plunger or cable is not at hand, chemical pipe cleaning agents can be used. There are several recommendations for choosing household chemicals:

1. Choose a composition that can dissolve wool, hair. This should be indicated on the packaging.
2. Both powders and liquids are effective.
3. The packaging indicates information for which pipes the chemical is suitable.

After falling asleep the cleanser, you need to wait for the time indicated on the package, then do not use the drain for another 10-15 minutes.

Pipe cleaning chemicals

Folk remedies

If it is not possible to use hand tools or household chemicals, you can use improvised means.

Soda

Baking soda can be used to remove clogs. There are two options for using this substance:

1. Pour half a package of soda into the drain hole. Turn on hot water after 5 minutes.
2. Pour 4 tablespoons of soda into the drain, pour 200 ml of vinegar.

Boiling water

This method is only suitable for metal pipelines. It is enough to boil about 4 liters of water, pour into the drain.

dish detergent

Dishwashing detergent should be diluted with water in a large jar. When foam appears, you need to pour the solution into the drain. However, this is a weak method that rarely brings good results in clearing clogged pipes.

Sulphuric acid

Cleaning of clogged metal pipes is sometimes done with sulfuric acid. However, it is necessary to work with this liquid very carefully so as not to damage the pipes and skin. This chemical is not suitable for plastic tubing.

A method that requires the use of special equipment that ejects high-pressure jets of water. To do this, you need to call a certain service, specialists will come and clean the pipes.

Siphon cleaning

The male owners do not think long about how to clear the blockage in the bathroom. As a rule, they immediately begin to clean the siphon. This procedure allows you to get rid of debris accumulated in the pipes and an unpleasant smell in the room.

Cleaning procedure:

On the floor directly under the siphon, you need to lay a rag that absorbs moisture well.

A basin should be placed on top of the fabric. Such a simple measure will prevent dirty water from getting on the floor.

The lock nut must be unscrewed very carefully. After that, you need to remove the flask.

Immediately after this, the water that formed the water seal will flow into the basin.

The siphon itself should be thoroughly rinsed with water and all plaque removed from the walls.

Such cleaning can also act as a preventive measure. For this purpose, the siphon is cleaned every 2-3 months.

Cable

A plumbing cable is a thick twisted wire coiled into a small spiral. For convenient rotation, a handle with a wooden or plastic nozzle is provided at the end.

Such a device is actively used to remove sewer blockages. And we are talking mainly about metal pipes.

Application:

The end of the cable must be carefully inserted into the drain hole.

It is best to do the work together. So, one person slowly rotates the handle, while the other gently pushes the cable forward.

When the cable is twisted, accumulated debris is removed from the pipes, that is, the blockage is destroyed.

As soon as the tension in the pipes decreases, you need to pull the cable back and forth several times.

The cable is carefully removed, washed and stored.

If the procedure was ineffective, it is repeated.

Ways to eliminate blockages in pipes

There are several sewer cleaning methods with baking soda and vinegar. Each of the approaches has a different degree of effectiveness.

Soda with boiling water

This method is suitable for removing partial tubal obstruction - it is a simple and safe procedure with a moderate degree of effectiveness.This approach is also preventive, it is used to disinfect the sewer and dissolve small deposits of grease on the walls. To carry out the procedure, you can use the following instructions:

1. Pour half a pack of soda (200-250 grams) into the drain of the sink, so that it is in full in the cavity of the pipes.
2. We heat the water in the kettle and pour boiling water into the drain in a volume of 600-750 milliliters (water must be poured in proportion with soda 3: 1).
3. We wait a quarter of an hour and turn on the water with strong pressure to check the result.
4. If the procedure did not give the desired effect, repeat it after half an hour.

Vinegar Soda

This is a more effective way to break through the blockage, which is resorted to if the water does not pass well or even stands in the sink. To conduct an event, you must follow the following algorithm:

1. We prepare 2 containers with an equal volume of soda and vinegar, you will also need rags and boiling water.
2. Pour sodium bicarbonate into the drain so that the bulk substance goes into the siphon in full. To prevent blockage, pour a couple of tablespoons of the substance, and for a strong blockage - 200 grams (1 cup).
3. We heat 9% vinegar in the microwave for 30-60 seconds. We pour the substance into the drain, after which we observe a strong chemical reaction. The amount of acetic acid poured should correspond to the amount of soda poured earlier.
4. Using a rag or cloth rag, we close the overflow and the drain hole so that the gas does not have the opportunity to escape, and the pressure inside the pipe is maximum.
5. After 1-2 hours, open the sink and turn on hot water.

The reaction of baking soda with vinegar will allow you to clear a more complex blockage than pure soda can.

Video: clearing sewer blockages with baking soda and vinegar

High pH Solution

If the above methods do not give the desired result, you can resort to a little trick and prepare a solution of soda with a higher pH. The classic sodium bicarbonate solution has a pH of 9, if you replace the soda with sodium carbonate, you can get soda ash to prepare a solution with a pH of 11.

To prepare this remedy, you do not need to run to the store, since sodium carbonate can be obtained at home from ordinary baking soda. To do this, pour 150 grams of soda into the pan and put on a slow fire. At temperatures above 60 degrees, a reaction will begin with the release of carbon dioxide and water. After a few minutes, the soda will become more dry and free-flowing - this is sodium carbonate.

To prepare an alkaline pipe cleaner, do the following:

1. Pour the resulting sodium carbonate into the container and fill it with 200 ml of warm water.
2. Mix the ingredients until a homogeneous consistency is obtained.
3. Pour the solution into a clogged drain and wait a few hours.
4. After the allotted time, we flush the sewer with plenty of hot water.

Video of professional sink cleaning

Do-it-yourself plumbing maintenance

First of all, you need to check the siphon connected to the sink. At the bottom is a removable cover that can be easily turned off. Before doing this, you need to substitute a bucket (basin), since there is always a little water in this place.It is this part of the drain system that is the "sump" where various suspensions accumulate.

It is necessary to thoroughly clean the entire inner surface of the cover from dirt. In addition, the siphon body itself also needs maintenance. Over time, everything that falls into the drain settles on its inner wall. Over time, a rather thick layer of such deposits is formed, which prevents the flow of fluid. It is not difficult to remove it with some kind of “stick” with rags wound around it.

It is necessary to clean the flexible connector (“corrugation”) between the siphon and the sewer pipe (or elbow) in the same way. Taking it off is easy enough. It is he who is most often the "culprit" of the formation of blockage in the sink. The corrugation is gently stretched and its internal cavity is cleaned (rags + stick).

If necessary, the same is done with the sink in the bathroom.

If such prevention did not give a result, then it is necessary to deal with the drain system.

Pipe cleaning

It is done in various ways and means. Consider the most accessible and common.

This plumbing "tool" is in every home, and if the sink in the kitchen is clogged, then its use is the most convenient option. At the same time, one nuance, which was mentioned above, is quite often overlooked. The entire drain system is a single circuit in which the law of communicating vessels operates.

In order for the plunger to work to give the desired effect, you need to tightly close all the holes in the plumbing fixtures located in other rooms. In the bathroom, this is a drain and “overflow” of the bathroom itself (2 points) and a sink (if any). In addition, the toilet lid must also be lowered onto the bowl.

Pour water into the kitchen sink and cover the drain hole with a rubber plunger nozzle. Do not forget about its overflow. This hole must be covered with a cloth and pressed with your hand. After such a complete “sealing” of the system, the blockage in the sink can be pierced by a “column” of water. To do this, the plunger handle makes several sharp movements up and down, after which it is removed from the drain.

For a better result, a similar procedure should be repeated, and several times, periodically draining the water (depending on how it will go).

More radical method. The device is inserted into the viewing window on the pipe (or in another accessible place) and pushed along it - until it stops. After that, it is pulled back, rotating around the axis with the help of a handle. Its bent end cleans the inside of the pipe well, so you need to pull out the cable gradually.

Hardware stores sell a variety of tools designed to clear blockages in sinks. The most famous of them - "Mole". Their principle of operation is that after pouring the solution into the pipe, it softens all the substances that form a "plug". After a certain time, an abundant “strait” (preferably hot) is made with water, and the remnants of the blockage are washed into the general sewer.

The recommendation for use is indicated on the packaging

It should be noted that when working with such compounds, precautions must be taken.

There are also "folk" remedies - soda, vinegar. Half a glass of each is taken, and in turn - into the drain hole. But this will only work if the "cork" is not far from the drain.

Separately, it is worth mentioning the acid. You can hear the advice that she breaks through any blockage.But at the same time, it is forgotten that acids really corrode EVERYTHING. If the pipes are made of plastic, especially "corrugation", then it is better not to tempt fate.

When removing blockages, you do not need to save on water. The more it is drained, the less dirt will remain in the pipes.

For a private house, given the complexity and length of the sewerage system, it is advisable to clean (and prevent) pipes in a hydraulic way. For this, special installations are used, and many companies provide similar services. The effect is very good, and after such a drain treatment, blockages can be forgotten for a long time.

Chemicals

In some cases, it is appropriate to use chemicals if the tub or sink is clogged. A large amount of chemicals are sold in stores in the form of a gel, powder, liquid or foam, which can remove everything bad that is stuck in the pipeline in a few minutes. Organic contaminants are ideal for chemical removal.

Recommendations:

1. Be sure to read the instructions included with the kit before use.
2. Use personal protective equipment to avoid unwanted consequences.
3. Buy products that dissolve the hairline.

Folk method number 1: boiling water

Folk methods are no less popular and give good results. But, alas, removing a strong blockage in the sink or bath with the help of them is impossible. If pipes or drains have accumulated a large amount of fat, then this can be corrected with boiling water. Just pour boiling water into the hole until the water begins to flow better.

Folk method number 2: vinegar and soda

Baking soda and vinegar react with each other, so they can remove more difficult pipe stains.At the very beginning, soda is poured into a glass, after which it is sent straight to the drain. Next, pour vinegar into a glass and pour it down the drain and plug it with a cork. Foam will begin to form if the vinegar and soda react. After 15-20 minutes, rinse with hot water to wash off the remaining vinegar and soda.

Folk method number 3: lemon

Folk remedies are beneficial and convenient to use at home, but they do not always give the desired effect. But lemon will help get rid of light pipe contamination. Squeeze the juice from one fruit down the drain and wait an hour or two. As time passes, the sink or tub is rinsed with hot water.

Proven options with instructions

There are several methods of using soda solutions in the fight against blockages. The composition of the cleaning agent is prepared depending on the nature of the substances that formed the mud plug, as well as on its density.

An important role in the proportional ratio of components is played by the material from which the sewer pipes are made. It is also necessary to take into account the degree of wear of waste equipment.

Soda with vinegar in different proportions

To eliminate the mud plug you will need:

• 150 g sodium hydrochloride (soda ash);
• 100 g table vinegar.

Sequencing:

Wear gloves, an apron and goggles.
Pour baking soda into the drain hole in a thin stream.
Then carefully add the vinegar.
Plug the hole immediately.
Boil 5 liters of water.
After 1-1.5 hours after the start of the chemical reaction, pour boiling water into the drain.

To remove a dense blockage, a more concentrated solution is prepared. To do this, mix half a pack of baking soda with 100 g of acetic acid.Quickly pour the mixture into the drain and close the hole with a stopper. Using concentrated acid instead of table vinegar, you can provide a more intense release of carbon dioxide.

But it must be remembered that with the help of soda and vinegar, only those mud plugs that are near the drain can be removed. In the fight against remote blockages, more radical methods must be used.

Using Whiteness with Vinegar and Baking Soda

The active substance of "Whiteness" is sodium hypochlorite, which has a powerful antiseptic and antimicrobial effect. But it is impossible to mix this remedy, which includes active chlorine, with a solution of soda and vinegar.

It is better to first clean the blockage with a soda-vinegar solution, then after 1.5 hours, rinse the drain with a pressure of hot water. And only after 12 hours, 1 liter of "Whiteness" can be poured into the drain hole.

Do not use the bathroom for about two hours. During this time, the product will dissolve the remnants of greasy plaque and eliminate the unpleasant odor. Next, the drain must be washed with five liters of hot water.

Caustic soda

Apply caustic soda to clean the blockage is possible only if the sewer pipes are made of metal. All other materials may be damaged. The exposure time should not exceed three hours.

Caustic soda can be in the form of a powder or granules. Some sanitary cleaners sell caustic soda in liquid form.

Prepare a solution from powder to remove blockages as follows:

• prepare a galvanized bucket with a volume of 10 liters;
• pour 2 kg of caustic soda into it;
• pour the powder with seven liters of cold water;
• mix with a wooden or metal stick until the sodium is completely dissolved.

The chemical reaction of the interaction of caustic soda with water is accompanied by an increase in temperature to 60ºС.

Mode of application:

1. Send the prepared solution to the drain hole.
2. Close the drain tightly with a stopper.
3. Wait 3 hours.
4. Direct a stream of cold water into the drain, hold for 15 minutes.

In a private house, cleaning with caustic soda is recommended to be carried out 2 times in a row. To achieve a greater effect, dry caustic soda can be immediately poured into the drain hole without dissolving in water.

First you need to warm up the pipes. To do this, send 3 liters of boiling water to the drain and wait 10 minutes. Then pour 6-7 tbsp. granulated caustic soda. It is necessary to ensure that the substance does not wake up on the surface of the bath. If the powder does get on the enamel, it must be removed immediately with a wet cloth.

Then a glass of warm water must be poured into the pipe. In order for the caustic to dissolve the blockage, it will take at least three hours. Then rinse the drain with clean water. It is necessary to work with caustic soda only in protective clothing (apron, gloves, goggles).

Before the procedure, be sure to open the windows and doors to the bathroom and turn on the ventilation. If the solution comes into contact with the skin, immediately rinse the body area with plenty of clean water.

Folk remedies for drain cleaning

If the dismantling of the siphon is impossible, and the use of chemical cleaning will damage the pipes, then the easiest way is to use the "improvised" methods for cleaning the drain. The following "ingredients" are perfect for this:

• baking soda;
• salt;
• table vinegar;
• lemon acid.

These tools can be used individually or together. For example, a glass of baking soda sprinkled down the sink drain works even better if you add salt or vinegar to it in a 1:1 ratio. But citric acid will perfectly clean the siphon on its own. But in order for these funds to more effectively cope with their task, you must first dissolve them in a glass of hot water, which should be poured into a clogged drain.

Then you should close the drain so that the vapors of these substances do not rise into the air and give the solution time to act. As a rule, it takes from 2 to 6 hours. Of all the methods for reliable cleaning of the kitchen sink drain, it is precisely the 5 above methods that do not require either large financial costs or physical effort and time. That is why it is worth resorting to them if the blockage in the sink still makes itself felt!

Question answer

How to clear a blockage with a cable?

If you have already tried all the ways to eliminate blockages and even disassembled the siphon, but the problem has not been solved, then this means that the blockage has formed in the drain pipe, and not in the siphon or hose. This does not happen often and only in old houses. In this case, the only way out is to clean the pipe with a plumbing cable or call a plumber. Actually, it's not difficult at all. From this video you can learn in detail how to clear the blockage with a cable.

What preventive measures should be taken?

To prevent kitchen pipes from becoming clogged for as long as possible, you should follow these recommendations:

• A clogged kitchen sink is a normal and inevitable problem for any home, but it is best to prevent it from occurring for as long as possible and carry out preventive measures in a timely manner.After all, the more often we clean the pipes, the faster and easier the blockages are removed, and the pipes and siphon do not wear out. Just get in the habit of running hot water or boiling water down the sink drain for 20 minutes every week, or cleaning the plumbing with a plunger.
• Try not to pour liquids containing cooking oil down the kitchen sink, as it freezes in the pipes / siphon and provokes the growth of deposits on the walls of the water supply. If, nevertheless, this happened, immediately take preventive measures - let hot water / boiling water or pour soda and salt into the drain (see).
• Of course, all dishes before washing in the sink should be cleaned of food debris. Most often, the cause of blockages lies in our laziness.
• The drain hole must be supplemented with a special mesh that protects the pipe from large food particles.

• We clean the hood from fat - quickly, simply, effectively
• How to clean a frying pan inside and out - 12 best ways
• How to Clean a Pot Outside and Inside - 8 Simple Ways for Difficult Cases
• How and how to clean a glass-ceramic stove - 7 ways
• How to Descale Your Kettle - 6 Home Remedies
• How to properly and quickly defrost the refrigerator in 8 steps

Plumbing cable - a more serious way to clean

Everyone is well aware that with the help of a plunger, only small blockages can be cleared, so it is necessary to consider other methods of dealing with this trouble.

The plumbing cable must be taut while clearing the blockage.

If the blockage is far in the pipe or it is strongly compressed, they resort to cleaning using a cable.The essence of this method is that you need to hook the garbage with a plumbing cable, pulling it out or pushing it into a wider highway.

This procedure is as follows:

the cable is inserted into the drain hole;
one person pushes the cable, and the other rotates it;
after passing through the clogged place, you need to make a couple of sharp jerks back and forth, then open the hot water tap and carefully pulling out the cable, wash off the dirt that has formed in the sewer pipe.

It is worth paying attention: the rotation of the cable contributes to a better destruction of the blockage. Plumbing cable is sold at the hardware store, but you can make it yourself

To do this, you need to take a piece of a sufficiently flexible metal cable, bend it and fluff the tip a little. Thanks to this manipulation, the cable will move well along the bends of the pipe and will not rest against the knee

Plumbing cable is sold at the hardware store, but you can make it yourself. To do this, you need to take a piece of a sufficiently flexible metal cable, bend it and fluff the tip a little. Thanks to this manipulation, the cable will move well along the bends of the pipe and will not rest against the knee.

This is important to know: for ease of grip, the cable should be wrapped with something rigid to make a kind of handle. It is also necessary to mention the fact that the plumbing cable should not be used to clean plastic, chrome-plated pipes - then their inner surface can be damaged.

It is also necessary to mention the fact that a plumbing cable cannot be used to clean plastic, chrome-plated pipes - then their inner surface can be damaged.

Radical solutions

Since clearing blockages in sewer pipes is essential to the normal operation of the weir system, the correct method of removal must be chosen on a case-by-case basis. If hot water is present in the recipe, then it can be used for metal pipes

To clean plastic pipes, you can use a liquid heated to only 70 degrees.

Vacuum cleaner application

You can clean the cork with a vacuum cleaner. This method is suitable for sinks. The technical device must have the function of blowing air and significant power. The most commonly used technique is Karcher. The tube of the vacuum cleaner is wrapped with a rag and inserted into the hole. Be sure to fix it tightly.

After preparation, the device turns on at full power. If the cork is not very deep, then the air flow will push it out. Additionally, you can use a plunger. He cleans the pipe with pressurized water. But it is also effective if the cork is not very deep.

Siphon cleaning

The diameter of a standard siphon is 35-45 mm, so it quickly becomes clogged. For cleaning, the removable part must be twisted. Before that, it is advisable to put a bucket under the siphon to drain the remaining liquid. Next, large debris is removed from the structure. For cleaning, a wire or cable is used. Now the siphon should be washed with hot water, wiped dry and screwed on.

If the water from the bowl of the sink drains quickly, then the problem is solved. A triple or corrugated siphon is cleaned with a cable.

Rope use

A pipe cleaning cable is most often used if the sewer is made of plastic pipes.Instructions for using the device are as follows:

1. First, the cable is prepared. It needs a container of water (for cleaning). The bucket must also be placed under the sink.
2. Now the siphon is untwisted and washed.
3. The sewer cable is carefully inserted into the pipe and slowly scrolls inward.
4. From time to time, the cable needs to be taken out and cleaned.

As soon as the blockage is cleared, the cable is removed and the siphon is assembled. The last step is to flush the pipeline. If there is no special cable, then a thick wire with a hook at the end is used to clean the pipes.

Using a plastic bottle to clean the sewer

Cleaning the toilet bowl with a plastic bottle is simple: cut off the bottom on the product, while the lid is closed. Now the bottle falls into the water and moves up and down sharply. This method of cleaning is effective if the cork is localized in the kink of the toilet.

Hydrodynamic installation

In this case, a technical device is used that can create a strong water jet.

This method is suitable if simpler measures were ineffective. If the drain system is too old, then the use of a hydrodynamic cleaning unit must be careful not to damage the pipes. The liquid enters under a pressure of about 200 atmospheres.

The liquid may be cold or hot. In apartment buildings, this method is not used due to the risk of damage to the pipeline.

First aid for blockages - 6 easy ways

Perhaps the following simple and completely harmless to pipes (of any kind) steps will be enough to clear a blockage in your kitchen sink, and you will not need to read the article further.

Method 1. Cleaning pipes with boiling water or hot water

Perhaps this is a measure of the very first aid, which is often enough to eliminate blockages.

1. If the pipes are steel, pour about 1 liter of boiling water into the drain hole and wait 20 minutes. To clean plastic pipes, we simply run hot water from the tap for 20 minutes as well (water temperature should not exceed 60 degrees). A plug that is not too tightly set should drain into the sewer.
2. We check the result by letting a small stream of water. Did not help? Let's try another method.

Method 2. How to clear pipes from clogging with a plunger

1. We tightly plug all overflow holes in the sink with a wet rag to block the passage of air and provide a hydraulic column.
2. We press the plunger to the drain hole, then sharply pull it towards us. We repeat these steps several times in order to properly “stir up” the cork and break it into small pieces.
3. We check the result by releasing a small stream of water.
4. Let the hot water flow for a few minutes so that the plug safely goes down the drain.

Hints:

• If there is no plunger at hand, and the blockage is not too complicated, then you can replace it with a glass or a rag. The actions are the same: we press it against the drain - we pull it out sharply.
• If you have a two-section sink, then you need to have two plungers and use them at the same time. That is, when cleaning the drain in one bowl of the sink, you need to close the drain in the second. This will create more suction power. If there is no second plunger, then cover the second drain hole with a damp cloth and press it with your hand.

Method 3. How to clean grease pipes in the kitchen with soda and salt

A blockage in the sink in the kitchen is often formed due to the abundance of fat frozen in the pipes. In this case, regular salt and soda can fix the problem.

1. Dissolve half a cup of salt and 1 cup of soda in a glass of water and pour the resulting mixture into the drain, wait 5-10 minutes.
2. With a plunger (or a rag), we act as described above (see).
3. Rinse pipes with hot water.

Method 4. Eliminate blockage with vinegar and soda

Another popular way to clean pipes in the kitchen at home is with vinegar (9%) and soda. The caustic foam formed as a result of the chemical reaction of these components should corrode the blockage.

1. Pour 150 grams of soda into the drain hole, and pour the same amount of 9% vinegar on top.
2. Close the drain with a stopper so that the foam does not come out.
3. Wait a couple of minutes, then turn on the hot water with full force - this will help push the cork.

Method 5. Elimination of blockage ... Alka-Seltzer

If there was suddenly no soda in the house, but there is Alka-Seltzer, then he will also be able to clean a moderately clogged siphon. By the way, this tool has another bonus - the unpleasant smell from the sink will disappear.

1. Pour a couple of Alka-Seltzer tablets down the drain hole, and then pour 1 cup of 9% vinegar.
2. After 2 minutes, run the hot water all the way down to help push through the dirt.

Method 6. How to clean the blockage in the pipes with a vacuum cleaner

Do you have a blower vacuum cleaner? Excellent! We wrap the vacuum cleaner pipe with a rag so that it fits snugly into the drain hole. The strong airflow from the vacuum cleaner will push through the stagnation.

Blockage Prevention Measures

Using this grinder provides a number of advantages:

1. A food waste recycling device helps to get rid of unpleasant odors. Cleaning of pipes and siphons is required much less often.
2. The chopper is a reliable and versatile device that can chop not only the remains of vegetables and fruits, but also, for example, chicken bones.
3. During operation, the device does not make noise.
4. Saves time spent on cleaning the sink from the peel, food debris and bones that have collected in it.
5. Maintenance and care of the grinder consists in rinsing the device with cold water.
6. The siphon does not clog.
7. The hygiene of the device is achieved by eliminating the source of germs and bacteria that live in the collected garbage.
8. Takes up little space under the sink.

Soda for small blockages

Soda in combination with soda will help to cope with a small blockage in a bath without a plunger. For this:

• pour 125 mg of each into the drain;
• pour soda and salt with 3 cups of boiling water;
• do not use the bathroom for 7 hours;
• after this time, the drain should be rinsed with hot water.

One of the most popular ways to eliminate debris in the drain hole with improvised means is to use baking soda with vinegar. These components react with each other and effectively remove blockage. For such a procedure, you will need acetic acid 70% (200 ml) and 3 tbsp. l. soda.

Care must be taken when working with vinegar, as it is very easy to get a chemical burn. Soda is poured into the drain and poured with acetic acid

Then you should wait 40-50 minutes and gently clean the drain with boiling water until the foam from soda and vinegar disappears completely. It should be remembered that this method will only destroy organic waste. If the bath is clogged and needs to be cleaned of inorganic contaminants, then it is best to use a cable, plunger or store-bought preparations.

Types of siphons

The procedure for cleaning the siphon largely depends on the structure of the latter. Structurally, they can be divided into the following types:

• Bottle (aka flask);
• Corrugated;
• Pipe;
• Flat (similar in shape to a bottle, but at the same time it has a flat sump shape).

Each type has its pros and cons. It is worth noting that the bottle model is most common for installation on kitchen sinks and bathroom sinks. The sump tank not only provides reliable protection against unpleasant odors, but the design also provides a large space for the accumulation of debris (compared to tubular or corrugated models).

Tubular siphons have a very simple design. In fact, they are a curved U-shaped tube. The rotation creates a shutter that prevents unpleasant odors from entering the room. To clean such a model, it is necessary to remove the curved section of the pipe, where all the debris usually accumulates.

Corrugated siphons are similar to tubular ones. In this embodiment, the bend is formed independently from the corrugations. Cleaning is usually done with a cable. Corrugated and tubular models are commonly used for installation on bathtubs and showers. They are compact in size (when compared with bottles), which means they take up little space. However, such a design clogs faster. However, only soapy water and hair are usually found in the waste in the bathroom and shower, so these models are considered the most suitable.