How to connect a phone to a TV: a dozen popular connection methods

Possible problems

Sometimes a situation arises when, in the process of connecting a mobile phone to a TV, equipment owners are faced with the fact that the receiver simply does not see the smartphone. Most often, one of the following malfunctions occurs:

• the TV cannot find the smartphone;
• the smartphone is not charging from the TV receiver;
• viewing is available exclusively for photos.

If the TV does not notice the smartphone, then most likely the problem is in the pairing option. Android and IOS smartphones have their own connection type selection option. To set the desired mode for Android, you need the following.

• Connect mobile. After this is done, you will notice the operating mode icon at the top.
• Next, you need to call the top menu and select the option "Charging via USB".
• Select the File Transfer section.

Please note that information transfer is supported from an Android device starting from version 6.0.0.

If the desired type of data transfer is not set, try using the "Camera (PTP)" mode. Both options provide a good opportunity to view images, while video and audio recordings will not be available for viewing. It happens that the necessary menu simply does not open. In this case, it is better to initially connect the smartphone to a laptop or personal computer. After that, the user will have to set the appropriate mode again after reconnecting to the TV receiver.

Setting up a connection for smartphones with iOS OS is performed in accordance with the following instructions. If you use a direct connection of an IOS device, then only the device will be charged.

Connect the adapter to the TV-translator through a regular charging cable. The other side of the adapter should be connected with a wire to the connector located on the side or on the back of the TV panel. On the remote control, click "Source", specify "HDMI number", it depends on the total number of connectors on the equipment. After a couple of minutes, the record will appear on the display.

If you could not connect your smartphone to the TV, then you need to take the following steps.Make sure both devices are connected to the same access point. If this is not the case, you need to establish a correct connection to one source.

If you notice any visible damage to the eye, then the wire should be replaced - you can purchase a standard cable at any home appliances and electronics store, as well as in a communication salon. After that, try to establish the connection again.

It is possible that during the connection you activated the wrong mode of operation. Sometimes the smartphone will automatically enable the MTP (Media Transfer Protocol) option. In this case, at the time of connecting devices, you must change the mode to “PTP” or “USB device”, and then try to start the switch on again.

Check if the TV supports the file format you have selected. It happens that documents do not open due to the ability to combine document formats and the capabilities of the TV. The list of formats that the receiver can support can always be found in the user manual. If yours is not among them, then you need to download from any converter program, install it and convert the document format into a suitable one.

If you notice any external damage, you will have to contact the service center - it is unlikely that you will be able to cope with such a breakdown on your own. As a last resort, you can purchase an adapter and try connecting the USB cable through some other port. If after all these steps you still cannot transfer files to TV via USB, then you should look for alternative options.

In our article, we have covered questions about how you can connect a mobile phone to a TV via USB and display the image on a large screen.We hope that with the help of our instructions, even a person who does not have any experience with technology and electronics will be able to cope with the task. Guided by the above algorithms, you can always connect both devices in order to continue to view the contents of your smartphone on a large screen and enjoy the quality of audio and video.

To learn how to connect your phone to a TV via USB, see the video below.

Method #3: How to connect your phone to a Samsung TV via WiFi

To connect to a Samsung TV, you need any model that supports Wi-Fi Direct communication technology. For older products, including the ES5557, ES5550, ES5507, ES5537, ES5530, ES5500, EH5307, EH5300, E557, E550, F5300, H5203, H4203B, UE58J5200 series, you will need to purchase a special adapter module that connects to any available USB port. The recommended adapter model is WIS12.

To make sure that your Samsung TV supports this connection technology, just look at the stickers on the front panel or open the instructions. If there is a mention of SmartTV in the description, you can fully use the instructions below. In particular, it applies to Samsung R, N, M, Q or LS-series TVs:

1. The first step you need to follow in order to connect your phone to a Samsung TV via Wi-Fi is to go to the general menu called "Settings". This can be done, for example, by pressing the Home button on the remote control.

1. Now open a tab on your Samsung TV called General.

1. To continue connecting your phone to Samsung, find the "Network" sub-item and activate it by pressing.

1. Open the network settings using the button of the same name in the list of available options on the screen.

1. The choice will be offered several options for subsequent actions with the Samsung TV. You will need the first in a row, "Wireless".

1. If your Samsung previously worked in a different mode or was not connected to the network at all, wait until it detects available connections. Then select your home Wi-Fi from the list.

1. Using the built-in virtual keyboard, enter the network access password. When finished, click the Done/OK button. If necessary, you can view the entered password by checking the checkbox located next to the set field.

1. Within a few seconds, the Samsung TV will check the correctness of the entered code. When you see a notification on a successful connection on the screen, use the "OK" button again.

Now we will tell you how to connect a smartphone to a Samsung TV if the receiving device belongs to the K series:

1. Using, depending on the interface, the Menu button, go to the menu of your TV.

1. Instead of the specified button, you may need to press another, Home.

1. In both cases, the list of available tabs should show "Network". Navigate to this step using the Samsung TV remote control keys.

1. Open the network settings by selecting the sub-item of the same name from the list of available ones.

1. To proceed to further sync your Android phone and Samsung TV, you will need to define the "Wireless" network as the one used.

1. For the next few seconds, the TV will search for connection sources. Select the one you have access to from the list.

1. By clicking on the buttons on the virtual keyboard, enter the code from the wireless network in the new text field, and then click "Finish". To be able to view the characters you enter, select the "Show password" checkbox.

1. The Samsung TV will notify you shortly that the connection was successful. Now it remains to use the "OK" button.

As a result of the manipulations described above, you will see that a picture appeared on the TV screen from your smartphone. Now you know how to mirror your phone screen on a Samsung TV and you can freely play video games or watch media files on a wide monitor. As disadvantages of the above technology, it is necessary to note the significantly higher battery consumption of the gadget, as well as possible micro-delays in displaying the image. The key plus of the technique is the complete absence of wires that interfere with free movement around the room.

Via WiFi

This method will be relevant only for those users who have built-in support for wireless technology on the TV. Thanks to this option, connecting your phone is much more convenient, and you can manage files from a distance. For example, you can sit quietly on the couch and choose movies to watch or music to listen to.

To connect, it is necessary that the built-in Wi-Fi module is present both on the TV and in your mobile phone. If the TV has Smart TV technology, then Wi-Fi Direct is definitely there! As a rule, Smart TV is available in all latest generation TVs from Samsung, LG, Sony, and other manufacturers.

1. Go to the "Settings" of your Android smartphone and select the Wi-Fi item there.
2. Next, click on the "Advanced" tab and find Wi-Fi Direct.
3. On your TV, also go to "Settings" and find the same wireless technology there, and then activate it.
4. Turn on Wi-Fi on your smartphone, and the system automatically searches for available connection points on the TV. Once your phone's hotspot is found, the devices will be paired and connected to the shared network.

DLNA and webcasting

DLNA stands for "Digital Living Network Alliance" (Digital Home Local Area Network Alliance), the ability to use your home network to transfer media files to different devices.

In the case of a smartphone and a TV, you can simply install a mobile application that, when both devices are connected to the same Wi-Fi network, allows you to open video from the phone’s memory and broadcast it to the TV (you can also open and broadcast audio and photos).

I tested the XCast app (Cast to TV - cast video to TV) which allows you to:

1. Open and play files from your smartphone on your TV. This method opens up one interesting opportunity - you can not broadcast video from an online cinema (which is either paid or with a bunch of ads), but download the video to your phone and broadcast from the device's memory. Which, by the way, is quite convenient - the main thing is not to forget to delete the video later, otherwise the memory will quickly fill up.
2. Stream video from the Internet. In the application, you can open a browser and go to some online cinema. Due to the built-in tools, the program isolates the video elements and offers to broadcast them on the screen, bypassing any players with ads. But here it is worth noting that in practice everything is not so smooth, and in some cases, especially if it is a pirate site with a lot of ads, the application may not find the video on the page.

Wireless connection methods

A wireless connection answers the question of how to connect your phone to a TV without wires.Connection through tulips and wires is more often used in older models of units, and new equipment, thanks to modern technologies, communicates with other gadgets without the use of wires.

Connecting via DLNA

Now we will tell you how to connect the phone screen to the TV via DLNA. To implement such a connection, only smartphones based on Android are suitable. As for TV equipment, it must support DLNA-message.

A router is used to connect the gadget. Moreover, the television device can be connected to the home network via a cable, and the gadget via a wireless WiFi connection. After connecting on the TV screen, they view media files from a smartphone.

Sequencing:

1. To begin with, the TV and cell phone are connected to a single home network.
2. In the smartphone settings, activate the DLNA connection function.
3. In the gallery of the gadget, they find and open the desired file with media.
4. Then, in the menu sections, find the "Select Player" tab. In the list that opens, click on the name of the television equipment.

How to connect your phone to your TV via Wi-Fi

The turn has come to figure out how to connect the phone to the TV via WiFi. This option is only suitable for modern models of television equipment with a built-in Wi-Fi module, as well as for Android phones from version 4 and higher.

The connection is made like this:

• In the gadget, select the settings menu, click on the "Wireless networks" section, and then click on the "Wi-Fi" tab. When the list of available networks automatically opens, click on the button in the list header, select the Wi-Fi category. If there is no such button, go to the section with additional settings.
• There is an automatic search for networks for communication via Wi-Fi Direct.
• Then, on the TV, open the menu and find the "Network" tab. After clicking on it, a list of all connection methods opens, among which Wi-Fi is found.
• After automatically searching for available devices, select your smartphone model from the list.
• The phone receives a connection request, which must be confirmed. Now the gadget will connect to the TV to transmit the signal. An image and sound will appear on the equipment.

The advantage of wireless connection via Wi-Fi in the absence of wires. Free connectors are used to recharge the phone. Since the TV screen acts as a monitor, you can not only view media files, but also open applications and surf the Internet.

Connecting via AirPlay

Using an AirPlay connection is as easy as connecting your phone to your TV via USB. However, to implement the method, you need an Apple TV set-top box. It is worth adding that this method of communication is only suitable for Apple phones. Once connected, the TV is used to watch media, play games, surf the Internet, and give presentations.

To begin with, the TV and iPhone are connected to a single network. Then, on the smartphone, open the “Control Center” section and press the “Screen Repeat” button. In the list that opens, select Apple TV. Automatic synchronization takes place.

Miracast or Chromecast connection

To communicate between Android smartphones and Miracast-enabled TVs, do the following:

1. In the TV equipment menu, open the settings section, then the "Screen" tab, then "Wireless Monitor" and launch the desired function.
2. On the smartphone, activate the search function for Miracast devices and select the TV model.

A similar function can be used in equipment with an HDMI connector.To do this, buy a special universal adapter with support for Chromecast, Miracast and AirPlay. It is inserted into the HDMI port. If necessary, connect the power to it via a USB cable. Then on the TV select a section with a USB connection. In the smartphone, activate the "Wireless Monitor" function or download a special application.

To connect via Chromecast, a special set-top box is used, which is inserted into the HDMI connector. An additional USB cable is used for power. Then they switch to the HDMI port of the set-top box, after which they connect it to the Wi-Fi network. Download and install the Google Home app on your smartphone. The first login to the app is with a Google account. The content you are watching is launched in a special compatible application by clicking on the broadcast button and selecting the desired Chromecast device in the list that opens.

Method # 1: How to connect to a Samsung TV via HDMI from your phone

What do you need:

• Any TV from the manufacturer that has HDMI sockets. The latter are usually located on the back and / or side panel.
• Actually a cable with an HDMI pin or an adapter for connection.

The technology for connecting your phone to a Samsung TV, described in this section, is as simple as possible. At the same time, it provides the highest quality of information transfer. Since, most likely, your smartphone does not have a contact for direct connection with a cable, you will have to purchase an adapter for your phone - and use this device to connect to Samsung TV. You can buy such an adapter in the first electronics supermarket or service center that comes across.

To sync, follow the instructions:

1. It is necessary to connect the cable pins in series first with the smartphone, and then with the Samsung TV.
2. Go to the TV menu and select a new HDMI device as a media source - your phone.
3. Adjust the resolution as needed. However, modern Samsung TV models cope with this task automatically.

As a result of the manipulations performed, you will be able to fully synchronize the screens of your smartphone and TV. As we already mentioned, you can also connect a keyboard or mouse to the TV.

The disadvantage of this method is the need to connect an HDMI cable, and also, very likely, an adapter. Looking for an easier way to connect to your Samsung TV from your phone? Try options with USB connectors or a wireless network.

If the steps above do not work, and there is still no image on the Samsung TV screen, check if the signal source is selected correctly - and also make sure that the cable you are using is not damaged.

Ways to connect a smartphone to a TV with wires

The wired option is considered the simplest and most affordable. The question of whether it is possible to connect the phone to the TV does not arise. With the help of an adapter cable, information transfer is organized in the shortest possible time.

How to connect a phone with a USB cable

By connecting the phone to the TV via USB, the mobile phone is used as an external drive. So that the screen does not display the user's actions on the mobile phone, it is recommended to run the files sequentially, each separately.

How to connect phone to TV via USB cable:

1. Find at home or buy a special cable. It can be bundled with a mobile phone, acting as a connector between the phone and the charger. If the old cable is lost, buy a new one, choosing a connector.
2. One end of the cable is plugged into the mobile phone connector, the other is connected to the USB port on the TV.
3. Then they go to the TV menu, open the "signal source" or Source tab, select the USB section. A window will open on the mobile phone in which they perform similar actions.
4. The interface will open on the TV screen. It contains all the system folders from the phone. To open them, they work with a TV control panel, unless the equipment is equipped with the function of independent search and display of media files. In this case, the TV itself selects the files, navigation between folders becomes impossible.

The advantages of connecting via a cable are the ability to connect any device. No need to look for the cord, it is already in the charger. And in the process of viewing files, the phone will not be discharged, it is automatically charged from the TV.

Cons of the method:

• not all TVs support the required file formats, playback may be limited;
• you can’t launch gaming applications through the USB connector, you can’t go online - the TV screen cannot be used as a monitor.

How to connect phone to TV via HDMI cable

Most often, users are wondering how to connect a phone to an LG TV via HDMI. The method is simple, convenient, but only if the gadget is equipped with an HDMI connector. There is such a connector on the TV, it is located on the rear panel or from the end. But modern phone models may not have a connector; they are connected via micro USB on an HDMI cable or a special adapter.

How to connect phone to TV via HDMI:

1. Turn on the TV and select "signal source" in the menu. Here is the HDMI tab. After that, the cable or adapter is plugged into the connector of the mobile device.
2. Adjust images to fit a large screen. Sometimes the function is set to automatic.If not, manually select the options in the phone menu. This is in the mobile phone menu, where you set the frequency, picture resolution. All actions will be reflected on the screen, so the user can choose the dimensions without much difficulty.
3. So that the phone does not “eat up” charging, the screen is turned off and the TV remote control works. All actions are reflected momentarily, it is possible to connect a keyboard, mouse. This is done through the USB port or bluetooth.

Benefits of connecting your phone via HDMI:

• the USB port remains free, which means that you can connect any other gadgets, devices;
• The large screen is quite suitable as a monitor for gaming, work, presentations, etc.

Minus one - not all mobile phones support connection via HDMI. But the problem is solved by buying an adapter. The device costs within 200 rubles.

Lighting adapter

This adapter is used for Apple smartphones that are equipped with a special connector. Connection options are the same as with a USB cable, HDMI. One end of the Lighting goes into the TV port, and the other end goes to the mobile phone. The drive folders are displayed on the screen, it is possible to use the TV as a computer monitor.

Pluses of the method: USB ports remain free, the screen will completely replace the computer monitor in games and other activities. There are no cons. Provided that the user has an "apple" smartphone, this is the only convenient and simple wired connection option.

What you need to connect your smartphone to your TV via USB

This method is considered an alternative solution, since the connection using HDMI or Wi-Fi is most often used. To connect your phone to your TV via a USB cable, you will need:

• USB cable;
• smartphone on any OS;
• TV with a working USB port.

Most often, phone manufacturers include a wire in the package, because. this is the charging part

In this case, it is important that the mobile and TV used are compatible. As practice shows, there should be no connection problems

Even without Smart-TV, you can easily view photos, videos, run games on the TV screen.

How to display an image from a phone to a TV via MHL

One of the most modern and convenient wired connections today can be called MHL. Such a connection is made using specialized cables or adapters, one side connected to the micro usb port, and the other to HDMI. Such pairing is capable of providing not only power to the connected device, but also the highest playback quality, high speed of information exchange.

There are two types of such cables:

• Active
• Passive

In the first case, additional power is needed, so this MHL cable has a second USB port. The following option is only compatible with devices that both simultaneously support the new MHL standards.

The connection process is similar to HDMI pairing.

Another new development of combining gadgets and TV into one system is called SlimPort. It works with the help of a special adapter, one side connected to the usb telephone port, and the other to the TV receiver connector. But in this case, when connected, the gadget will not be powered, and it can only be used on devices that mutually support this technology.

How to connect a phone to a TV through a set-top box

There are several ways to connect your phone to a digital TV set-top box. This can be done using wires or wirelessly (using special programs).

USB

To solve the problem, you will need an Android phone, a TV set-top box or a TV with a USB port.

Note that this method is only suitable for viewing videos, photos or other files available on your smartphone. At the same time, connecting the phone to a TV set-top box via USB does not make sense, because it is easier to connect the phone directly to the TV. The general algorithm of actions is as follows:

Connect the TV to the device using a USB cable.

Select USB mode on the receiver.

• Confirm the connection mode on your phone (if necessary).
• A list of folders and files appears on the TV screen, which you can access to view.

Use the remote to navigate between folders. By the way, for some models there are online remotes.

Knowing how to connect your phone to a TV set-top box or TV via USB, you can view different files without downloading them to a USB flash drive.

HDMI

An equally popular way to connect your phone to a Smart set-top box is via HDMI. As in the previous case, this option is more suitable for direct connection to a TV. There is no need to use the tuner as an "intermediary".

When connected directly to a TV, you can watch movies, stream games, chat on the Internet, etc. After connecting, the picture from the mobile device is transferred to the TV screen. But keep in mind that the phone must have a different connector on the side - USB-C, Lightning, microUSB or another.

Via MeeCast (via Wi-Fi)

Many people ask how to connect your phone to a digital set-top box via WiFi. To do this, you can use the MeeCast program, which is supported by some tuners and is suitable for devices with Android 5.0 and higher. This option does not work with all receivers.Below we will consider how to connect your phone to the Tiger T2 IPTV PLUS set-top box.

The algorithm of actions is as follows:

Enter the receiver settings and enter the System and updates section.

• Download the new software and update the receiver via the Internet. Alternatively, download it in advance and throw it on a USB flash drive, then insert the drive into the USB connector.
• Go to the Network settings section and select a WiFi network.

• Enter a password and confirm your data entry.
• Wait for the connection and try to access the Internet (for example, via YouTube).
• Go to the MeeCast QR section and read the code using your mobile device.

• Download the program and, if necessary, allow downloading from an external source.
• Enter the Devices section and find the tuner to which you want to connect your phone.
• Click on the desired line and connect to the device.

After that, you can launch videos on the Internet and watch them on the big screen. This method is simple and allows you to quickly connect your phone to a TV through a digital set-top box.

WiFi Direct

Today, many smartphones have a WiFi Direct option that allows you to distribute information. With it, you can transfer photos, videos and other data to another device. Before connecting your smartphone to a TV without a set-top box, make sure that the option is available on your mobile device. Take the following steps:

Turn on the Wi-Fi Direct function on the TV.

Enter the phone settings, then Settings and Wireless networks. There, in the WiFi section, you need to connect the desired option.

• Scan the network and find TV.
• Use the Send menu to transfer data.

After that, you can transfer different files and watch them on the big screen.

By DNLA

Let's single out another way how to connect to TV through a phone without a set-top box - using the DNLA service. To implement the method, it is necessary that the TV and smartphone support this option. To implement it, take the following steps:

• Make sure your phone, set-top box, and TV are connected to the same network.
• Activate the DNLA option in the TV settings.

• Launch the Android Gallery and find the desired media file.
• Enter the menu and click on select player.
• Click on the name of your TV in the list.

To expand the capabilities, you can install an additional application, for example, Bubble UPnP.

Through Miracast

If the question is how to connect a smartphone to a Smart TV set-top box, use the capabilities of Miracast. Take the following steps:

Install the tuner in one of the HDMI ports.

Turn on the desired display option on the TV.

Download the Miracast app by QR code and connect through it.

Alternatively, you can use the standard Android option. To do this, go to Settings, then Display and Wireless Monitor.

In addition to those discussed above, other methods of connecting a smartphone and a TV are also used, but they are used less frequently.

USB connection

Consider the connection process in more detail. There are, of course, some nuances here.

It is important that the devices must be compatible with each other. To connect your phone to your TV via a USB cable, follow a few simple steps

For work we need the following devices:

• smartphone or tablet;
• regular usb cable, it can be part of the charger or be in the starter kit with the phone. The cable is usually used to transfer data to a PC;
• a suitable port on the TV.For most TVs, the USB port is widespread, for example, for modern LG or Phillips models.

So the workflow looks like this:

• We connect a cable to a specially prepared USB port on our TV.
• Turn on the TV, wait for its interface to load.
• Now that the monitor is turned on, connect the gadget to the second connector of the USB cable. Let's wait
• sound signal from the gadget.
• The smartphone will give a small notification or open the settings. Before our eyes, a window will appear with a connection request, as well as a line for selecting parameters.
• In the line, select the item "Operating mode as a drive." We select the same item by connecting the gadget to a PC for data transfer.
• At the TV, go to the source settings and click on the "USB adapter" option. Now the smartphone will be perceived by them as a standard storage medium: flash memory or a removable hard drive. Let's check if the data is determined and if the smartphone is connected.

Ready!

Of course, the performance of the method will depend on the gadget, the TV itself, their system software and compatibility. If the method does not work, then you can always try others. For example, connecting using HDMI. There will be many more opportunities here. This connection is especially convenient for gadgets from Samsung. There is also a wireless connection option via WIFI, which greatly improves the convenience of data transfer.

Wired connection methods

With a USB cable

Selecting the signal source - USB

Connecting via a USB cable is a quick way to display data on the screen. To do this, you need an Android smartphone, a charging cable, a TV with a working USB input (it is present in all modern models, even state employees). Connection algorithm:

• connect the panel and the telephone with a communication wire;
• turn on the TV;
• wait for a dialog box to appear on the mobile screen;
• select the item "link as a memory drive";
• using the remote control, select “USB” as the signal source;
• through the file manager, select the file you need to play.

Via HDMI

Lightning connector

allows you to turn your smartphone into a full-fledged computer with a large monitor, which will display all the information from the display.

Some models (mostly discontinued phones) have a mini-HDMi connector, which allows you to connect directly with a cord. If there is no such port, you will have to buy an adapter, depending on the type of communication connector:

• Type-C. The adapter will help connect the latest phones of flagship models (Samsung, Algy, others), middle class with TV. There are several adapters for connecting only via HDMI, as well as universal ones compatible with VGA, DVI or MiniDP.
• Lightning. Designed to connect Apple technology: smartphones, tablets.
• An adapter that allows you to connect state employees, outdated devices using a microUSB input. Before buying, please check if Mobile High-Definition Link is supported by both TV and phone.
• Slim port. An option when the previous methods do not fit. To connect, it is also necessary to have a mobile MicroUSB.

Other options

You can synchronize television equipment and a mobile phone in other ways, for example, with tulips - a composite cable that was actively used in the early 2000s. With this wire, today you can connect your iPhone to your TV.However, you need to understand that viewing videos and photos with high resolution will not work.

You can connect from a smartphone to a TV using a composite cable using several types of adapters at once. Which adapter do you prefer? It's up to you to decide. A lot depends on the iPhone model.

Composite AV cable - 3 plugs (tulips) and one USB input. Suitable for iPhone 4s and older smartphones from Apple.x

Component AV cord - somewhat similar to a composite cable. The main difference lies in the presence of plugs for image synchronization and improving the quality of the broadcast picture. Also suitable for iPhone 3, 4, 4s.

Lightning VGA adapter - used to connect new models - 5, 5s. The main feature is the presence of a 15-pin analog connector for the VGA cable.

Connecting an iPhone to a TV is a simple procedure that every user can handle. It is enough just to connect the connectors with a cable; in some situations, additional adapters are used that act as adapters. You don't need any special software to connect your iPhone.

Additional software configuration is also not carried out. You just need to open the main menu on the TV and select the signal source.

Through Miracast technology

Consider the connection using the LG TV as an example.

1. We go to the “Menu” on the TV, then we find the “Connection Manager” there and select “Smartphone” or “Tablet” in the general list. Now you need to select the Screen Sharing tab. As soon as you click, you will see the inscription Miracast. Click on the "Start" tab. That's it, the setup on the TV is over.
2. Let's move on to activating the technology on your smartphone. We go to "Settings" and there we look for the item "More". There will be a WiDi item.We click on it. You will see your TV in the list. Click on it and wait for the device to connect. As soon as the pairing is established, you will see the duplication of the smartphone on the screen and you will be able to launch games, applications, access the Internet, etc.

Here you can also connect a gamepad, for example, or a keyboard, and turn your Android smartphone into a full-fledged computer.