We clean the drain hose in the washing machine ourselves

flushing

Clearing the lumen of the removed drainage is easy. First you need to prepare a basin that can accommodate the drain hose. You will need to heat the water to a temperature of 60-70 degrees and prepare a detergent.

Procedure:

Inspect the tube for integrity.
Using a long and thin stick, remove mechanical blockage, if any.

If this is not possible, the hose must first be washed and then cleaned.
Immerse the tube in water, after adding an aggressive detergent to it, for example, for cleaning stoves and leave for 30-40 minutes.
Put on gloves and arm yourself with a sponge.
Remove the hose, wipe its surface with a sponge and rinse with running water.
Clean out the inside.
Treat the outer and inner parts with a detergent, put in a bath or an empty basin and leave for 20 minutes.
Clean off the remaining dirt and rinse well under running water.
Wipe and dry.
Attach back to the washing machine, fixing with a clamp.
Assemble the device in the reverse order, paying special attention to tightness.
When the drain hose is installed, run a quick wash as a preventive measure. Expert Opinion

Expert opinion

I work in the appliance repair industry. Extensive experience in the restoration of washing machines and dishwashers.

Ask a Question

Important! Prepare in advance a thick and hard wire or a thin stick, which can be used to clear the resulting blockage. Her diameter should not exceed ½ hose thickness

There is another quick option. You need to attach the end to the faucet. Turn on hot water at an acceptable pressure. Stretch and compress the hose corrugation with your hands. If the washing machine has been in operation for a long time, then a lot of deposits will come out, possibly a bad smell.

Go to menu

Cleaning the drain hose

The problem can be solved in several ways. Contact the repair shop, try to solve this problem without the help of a master. After all, he will not come immediately.You will have to wait for his arrival, and the laundry will gradually accumulate. In principle, most washing machine owners will be able to clean the drain hose. This work does not require special knowledge and professional skills.

blockage

A blockage is defined as a buildup of debris that prevents fluid from draining from a hose. It is divided into several types:

1. Mechanical. The filtration system is clogged. Various small objects, such as buttons, often fall here.
2. Natural. When washing, the drainage system begins to clog. Inside accumulate hair, various small particles. As a result, the hose becomes impassable.

A blockage can be called a powerful drain blocker. As a result, the washing machine does not work in the established modes.

Signs of a clogged drain pipe

When a blockage appears, the program starts to go astray. This is determined by the following features:

• indicators start flashing;
• the speed of the drain flow decreases;
• the machine starts to hum strongly;
• touchpad not working
• there is a permanent shutdown;
• the electronic system is triggered, the machine turns off at the time of draining.
• instead of draining, the “rinse” mode is turned on.

In order to cope with the problem on your own, you must first familiarize yourself with the design of the washing machine, understand how the drain system works. The manufacturer in the instruction manual provides all the information you are interested in.

How the drain system works

Before the final drain begins, the water enters the accumulator connected to the cleaning filter, where all sorts of small particles, small lumps of dirt settle.

After purification in the filter, water is supplied to the impeller.Only after that does it begin to drain. The impeller, rotating at high speed, creates pressure that pushes water through a flexible hose. On this way, a blockage may occur, and in any area.

Tube connection diagram

The drain hose is usually connected internally washing machine directly to the pump. For cleaning, you will need to disassemble the washing machine. Even if the drain is connected directly to the back wall, it is better to disassemble, since from the pump itself there will be another tube to the back wall. From the machine, the drain pipe is connected to the sewer system.

Depending on the model of the washing machine, there are several options for accessing the pump, and therefore for removing the drain pipe:

• access through the rear wall;
• access through the bottom of the car;
• access after dismantling the front cover;
• access after removing the side wall.

In some models, there is no need to additionally disassemble the housing of household appliances. For example, some manufacturers do not close the bottom of the machine with any plugs, and if the tubes are accessed through the bottom, then even disassembling is not required in this case.

How to clean the drain hose if it is partially clogged

Often this is due to clogging of the drainage system. There are two ways to solve this issue, and you can do it yourself. The first way is to clean the drain hose without disconnecting it from the washing machine. With partial clogging, when the water began to drain more slowly, it is possible to eliminate this problem without disassembling the drainage system. This is usually caused by the settling of detergent particles and fine fluff and fibers that have passed through the drain filter.

Various agents are commercially available for dissolving deposits that form on the inner walls of the drain hose. Before use, it is necessary to study the instructions for use, usually it is a powder or solution, sometimes found in the form of tablets. You should not worry that the use of these drugs can damage gaskets or seals. Washing machines produced by well-known world manufacturers have high quality components.

If there is any doubt about the quality of the connections and gaskets, you can rinse the drain hose with baking soda. To do this, you need to fill up 100-150 gr. soda directly into the drum and turn on the washing machine without linen in the "cotton" mode.

In the event that the removal of water from the washing machine completely stops, a second cleaning method will be required, in which it will be necessary to completely disconnect the hose from it. The tool for this will require the simplest - a flat or curly screwdriver and pliers. The sequence of actions in this case is quite simple:

1. Disconnect the washing machine from the mains.
2. Shut off the water supply.
3. Carefully disconnect the hose from the machine, after substituting a container to drain the remaining water.
4. Disconnect the drain hose from the sewer, clean it.

To de-energize the washing machine, simply remove the plug from the socket. On the hose that supplies water from the plumbing system, usually there is a tap, it should be closed. Basically, the drain hose is attached to the nozzle, which is located on the back of the washing "unit". Using a screwdriver or pliers, you need to unclench the retaining clamp and remove it.For ease of access and work with the washing machine, first put it on its side, laying a floor or other rag under it. Sometimes users do not connect the drain to the sewer, but simply place the other end of the drain hose in bathroom or sink.

Cleaning is carried out with a Kevlar cable, at the end of which there is a small brush; metal objects cannot be cleaned. After cleaning the hose in one direction, the operation should be carried out in the other, then rinse well under running hot water.

To be sure that the hose does not have to be removed again, it is recommended to inspect the filter as well. Perhaps it also needs revision and cleaning.

Different manufacturers have their own housing designs and filter mount, which will require access. Trademarks LG, Veko, new Indesit models, the bottom is closed with a lid, which is easy to remove with a flat screwdriver. Zanussi, Electrolux To access the filter, you will need to remove the back panel. German manufacturers of washing machines - Bosch, Siemens, made the front panel removable. Then, depending on the design, the filter is removed. It is attached to the body with latches or on a screw connection (bolt, self-tapping screws), sometimes it is screwed into the drain pipe. It may be necessary to remove the neck to which the drain hose was connected to to dismantle it. Work must be carried out carefully, without damaging the gaskets and seals.

The filter should also be thoroughly cleaned and rinsed under running hot water. Then the assembly is carried out in the reverse order. All connections must be well tightened, especially the hose clamp itself.The pressure during the withdrawal of water is small, but still it is.

After the machine is assembled and connected to the power supply, it is advisable to wash it with a cleaning agent to completely remove small particles. In addition, the connections should be inspected for tightness, if necessary, tighten the clamp.

For prevention, once every 1-2 months it is advisable to flush the machine from clogging and scale, in areas with increased water hardness, use means to soften it. It is also recommended to use a special bag for washing.

You may be interested

You can be the first to comment

Website updates

2015-2018 – All rights reserved

When copying materials, an active and indexed link to the source site is required.

How to restore the whiteness and freshness of the toilet with folk remedies

If going to the toilet has become unpleasant because there are conspicuous stains and an unpleasant smell inside, try cleaning the toilet with a brush. If the result did not please you, move on to more serious cleaning methods. Folk remedies are well suited for cleaning minor and old deposits in private houses and apartments that have a plastic pipeline or a local sewer / cesspool system.

With prolonged exposure, vinegar is able to dissolve hard urinary stone spit and lime without damaging the surface of the toilet.

To clean the toilet:

1. Use a plunger to clear the sewer system and pump water out of the toilet.
2. Wipe dry areas that require treatment.
3. Moisten a washcloth liberally with vinegar and apply to the plaque.
4. After 6 hours, wash the toilet and remove the remaining plaque with a non-metallic scraper.

To enhance the effect, you can use heated vinegar essence or vinegar-soda solution (for 1 tablespoon of acid, 1 tablespoon of soda). The processing mechanism is the same as when washing with pure vinegar.

Folk remedies are no less effective: ½ pack of soda, pour 1 tbsp. water (be sure to empty the toilet beforehand). After 15–20 minutes, pour a kettle of boiling water into it so that the dissolved blockages go into the sewer or street cesspool.

If there is a problem, than to clean the contaminated toilet bowl, use special or folk remedies. Use aggressive ones, like hydrochloric acid and autoelectrolytes, in extreme cases, because they are dangerous for the drain system.

For complex household appliances, which include a washing machine, prevention is necessary. Otherwise, active operation will quickly disable the machine.

Therefore, we have prepared an article-instruction on cleaning the filter and the main problems that washing machine owners face during cleaning.

How to clean the drain hose with your own hands

If you still find a malfunction in the work that arose due to a clog in the drain hose of the washing machine, then first of all you need to provide full access to the drain system.

Cleaning the filter

The filter system is located at the bottom of the washer, on the right, behind a small door with a hatch. In order to open it, you need to pry off the edge of this hatch with your fingers or some kind of flat blunt object. In some models, the panel can be opened by pressing the latch or by bending the swivel hooks.

Clean the filter in the following sequence:

1. Unscrew the screw and carefully remove the filter.
2. We tilt our structure, drain all the available liquid, substituting a container with low sides for this purpose in advance.
3. After there is no water left in the machine, we take out all foreign stuck objects. If structural elements are completely covered with scale, then they must be completely replaced.
4. Next, when you have already eliminated the dirt by rinsing with water and wiping with a damp sponge, inspect the place where the filtration system is located and remove the remaining dirt from the walls.
5. Clean the pump and the system adjacent to it, and then connect your device to power and turn on the drain mode. If you did everything right, the blades and impeller of the pumping system will rotate without interruption.

All the subtleties can be found in the video review describing the process in detail.

Attention: there are such exceptional situations when the system is so contaminated that it simply cannot be removed. In this case, it is advised to remove one wall of the washing machine and carefully clean the filter from the side of the pumping system.

Disassembly of the drain pipe

It is also possible that the flow of liquid will simply be blocked even simply at the junction with sewer pipes. To clean the drain in this case, you need to disconnect the hose.

Everything is carried out in several stages:

1. Disconnect the washing machine from the power supply.
2. Shut off the water supply valve.
3. Using a flathead screwdriver, remove the side or front bottom panel.
4. Pour out the remaining used water through the drain filter.
5. Using pliers, disconnect the end of the hose from the sewer pipe or siphon.

In devices of brands such as VEKO, Ariston, Candy, Samsung and Indesit, you can only get to the drainage hose through the bottom. In such cases, for the convenience of cleaning the washing machine from blockage, put your unit on its side, having previously laid some kind of cloth under it. After you open the clamp with pliers, you can safely disconnect the hose from the pump.

In washing machines from Electrolux or Zanussi, the hose runs along the back wall. In order to get close to it, remove the back cover of the case. Next, open the latches, unfasten the drainage hose, and then unscrew from water supply hose. To completely remove the drain hose, you must completely remove the top cover by unscrewing all the bolts and loosening the clamp to secure it.

In machines such as Bosch and Siemens, you can get the hose by removing the front panel of the housing. Everything is done in the following order:

1. Remove the sealing rubber from the front panel and unclench the clamp.
2. We take out the bottom panel and the retractable tray for detergents.
3. We unscrew the bolts for fixing and remove the hatch door lock.
4. Remove the front panel of the case.
5. Unclench the clamp and pull out our hose.

Cleaning the drain hose of the washing machine

They clean the drain hose by washing and treating the walls from the inside using special brushes. Masters in this business are accustomed to using not metal brushes, but those made of synthetics.

To clean the walls from the inside cable insert into a contaminated hose and move it back and forth. After this procedure, rinse the hose with water. If the contamination could not be removed the first time, the procedure should be repeated.

Helpful Hint: In order to achieve the best effect when washing, use warm water with citric acid added to it.

The hose, washed from all sides, only remains to be fixed to the old place by performing all the steps described in reverse order.

How to disassemble and clean the sink siphon - the easiest and most reliable way to clear blockages

If you have already tried to clear a blockage in the sink folk or chemical means, and the water still stands or leaves slowly, then most likely you need to clean the siphon. Fortunately, even a child can disassemble it. All you need is 15 minutes of free time and a screwdriver or coin.

Step 1

We unscrew the nut, which is located above the siphon tank, and carefully remove it

It is advisable, before disassembling the siphon, to put a basin under it for accidental puddles and collecting dirt. And, of course, don't forget to wear rubber gloves.

Step 2 We hold the siphon in one hand, and disconnect the drain hose with the other hand, unscrewing the nut between them. Next, we remove the siphon and the drain hose to the side (for example, into the basin), at the same time we remove the dirt that falls out of them.

Step 3. Now, in the sink, unscrew the drain grate with a screwdriver or a coin (most modern grates can be unscrewed with a coin).

Step 4. We unscrew the top nut on the remaining pipe and take it out of the sink along with the already unscrewed drain grate. Hooray! The siphon is broken.

Step 5 We wash all the details. To thoroughly clean the siphon, unscrew the flask from it.

Step 6 We assemble the siphon in the reverse order: install the drain grate and pipe, fix it with a nut, then assemble the siphon, connect it to the drain hose and, finally, screw it to the pipe. Ready! We check whether the blockage has been eliminated and are proud of ourselves.

Causes of clogging and their prevention

What is the reason for the blockage? Dirt and debris from the plumbing or clothing, as well as low-quality powders that clog the pump instead of dissolving in water. Therefore, two types of blockages are distinguished: mechanical (from debris) and natural (from the smallest particles of clothing accumulated on the filter). A natural blockage in the drain system forms in any case, albeit slowly, so if you never clean the drain system of your machine, it will definitely rise at the most inopportune moment.

In order to reduce the number of “cleanings” of the drain system in the future, it is enough not to forget the simple rules:

• Clothes with detachable "decorations" are best washed in special bags.
• Do not use poor quality washing powder.
• Once a month it is worth cleaning the drain system of the machine.
• Before each wash, check everything, even the smallest pockets of clothing for forgotten items, debris or pieces of paper.
• Fasten zippers and buttons before washing.

And remember, the washing machine also needs care, and then it will serve you well for a very long time.

Attention, only TODAY!

It is recommended to clean the filter and completely drain the water at least 2-3 times a year.

If this procedure is carried out regularly, then it can be avoided for a long time. drain pump failure. Sometimes there are cases when filter cleaning becomes necessary, for example:

If the washing machine does not drain water or a failure occurs during the spin cycle;

If the display shows the message “Clean pump”;

For this:

1. Disconnect the washing machine from the mains.

2. Open the bottom panel or cover on the panel that covers the filter.

Or so

3.Prepare a container and place it under the filter on the right side.

4. Open the filter a little. Do not remove completely. Gently turn the filter counterclockwise until water begins to pour out of it.

5. Wait until all the water has completely drained out, unscrew the filter completely and remove it.

or so

6

You can carefully tilt the machine forward to allow the remaining water to drain completely. 7. Clean the compartment where the filter was located and the filter itself

Clean the compartment where the filter was located and the filter itself.

7. Clean the compartment where the filter was located and the filter itself.

8.Check that the drain pump impeller rotates freely.

9.Reinstall the filter and turn it clockwise until it stops.

10. Replace the bottom panel (or the cover on the panel).

11. Plug in the washing machine.

If you have a model with an emergency drain hose, then remove the plinth (or panel) as described above. Then remove the emergency drain hose, place the water container at such a distance that the hose reaches it. Remove the plug from the hose and let the water drain into

capacity. The filter should be cleaned as described above. Then install the plug on the hose and place it in place at the base of the machine.

Despite the fact that the washing machine is an “assistant” in maintaining cleanliness, it also needs care and cleaning. If one day when washing, you hear an incomprehensible buzz coming from the machine, which you have not heard before, while the machine does not drain the waste water, this means that it urgently needs to be cleaned. Most likely, the drain pump is clogged, in the worst case, the pump is out of order.Therefore, we decided to tell you how to clean the drain pump in the washing machine on your own, without resorting to the help of a master.

Drain Hose Cleaning Instructions

The drain hose is disconnected with its own characteristics depending on the washing machine.

For example, when working with equipment from LG, Samsung, Indesit, you need to get to the pump through the bottom:

1. Remove the bottom (or bottom panel).
2. Remove filter elements.
3. We unclench the clamp and disconnect the pump of the drainage system.
4. Disconnect the hose.

For Electrolux and Zanussi machines, the process is different:

1. We unfasten the hose by opening the special latches.
2. We unscrew the hose from the water supply system (valve).
3. Remove the top and back covers.
4. We unclench the clamp on the drainage system, disconnect it.

With "washers" brands Beko and Siemens perform the following steps:

1. Remove the clamp and seal from the front of the housing.
2. We remove the container where the cleaning (detergent) is poured.
3. Remove the bottom panel.
4. We unscrew the bolts to remove the sunroof blocking system.
5. Detach the front cover.
6. Loosen the drain hose clamp and pull it out.

If the machine is not with a vertical way of loading laundry, as in the examples given, but with a horizontal one, then:

1. Remove the side panel.
2. Loosen the clamp on the drain hose and disconnect it.

The hose itself is cleaned as follows:

• We insert the cable into the hose alternately in both directions. You need to do this several times.
• Wash the hose with running water.

After the end of the procedure, the hose is connected back to the unit, and it is assembled in the same order as it was disassembled.

Video: disassembling a technical device and cleaning the drain hose of one of the indicated models.

Take good care of your washing machine. The cause of the breakdown may not only be a blockage in the drain hose. Regularly descale it, use proven products and carefully operate the equipment, and then it will serve you for many years. Also, for prevention, try to clean the hose in order to anticipate the problem in advance. A serious blockage can send your car in for repairs and is best avoided.

Blockage Prevention

In order to avoid the same problem in the future, perform a number of specific actions:

1. Always check all pockets before washing.
2. For washing, use special covers for clothes.
3. If the clothes have buttons and locks, fasten them before loading into the machine.
4. Along with the powder, add additional products to soften the water.

To provide yourself with additional protection against blockages of the unit when using the machine, place an additional filter on the supply pipe.

Professionals recommend every two or three months to carry out the prevention of blockages. To do this, you should periodically inspect your system, check filters and remove mini-clogs that have already appeared.

TOP stores of washing machines and household appliances:

• /- household appliances store, a large catalog of washing machines
• — profitable modern online store of home appliances
• — a modern online store of home appliances and electronics, cheaper than offline stores!

Blockage Prevention

In order to avoid the same problem in the future, perform a number of specific actions:

To provide yourself with additional protection against blockages of the unit when using the machine, place an additional filter on the supply pipe.

The washing machine is the first need. Thanks to the latest developments in the industry washing machine production, the process of washing clothes has ceased to take a lot of time and effort from housewives. Therefore, the resulting breakdown in the washing machine becomes a rather difficult problem. The most common cause of a malfunction is a blockage in the washing machine. With the right approach and following simple rules and recommendations, you can deal with blockage in a fairly short time.

Mechanical sewer cleaning

After the cause and place where the blockage has been found, you need to decide how to clean the pipes.

Pipe clogged with paper

The easiest way to remove a cork from paper is with a water hammer. A significant increase in fluid pressure on one side will push the wad of paper through the bottleneck.

Important! This will not completely remove the plug, but only move it into a lump in the riser. Paper usually sags in the riser and does not cause more problems.

But sometimes it is possible to block the exit to the well or the bed. This trouble is possible if the sewer is clogged with grease, hair or other debris.

Water hammer can be created in several ways:

1. Plunger. Such a device covers the liquid in the discharge area from the bathroom or sink. With sharp pressure on the handle, high pressure is created in the pipe;
2. You can create a water hammer using a plastic bottle, you need to take a container of 1.5-2 liters in volume, tighten the cork tightly and cut off the bottom.This device is used as a plunger;
3. You can create a water hammer with the simplest device from a stick and a rag, which is folded in several layers. She is placed on a mirror of water at the point of discharge from the toilet, and sharply pressed on her with a stick. Do not get carried away - too strong blows can damage ceramic plumbing fixtures.

The last option can only be used when the toilet is clogged. A paper cork that clogs a pipe cannot be pushed in this way - when you click on device, the liquid will begin to flow into the tub or sink.

Clogged with food waste

Such pollution of sewer pipes is best cleaned with a plumbing cable. Outwardly, this is an ordinary steel cable of small diameter, a handle is fixed on one side of the cable, with which it can be rotated.

It is necessary to mention several important subtleties of using such a device:

• The cable must be inserted into the pipe stretched. If it weakens, then it will fold in half and form a loop;
• It is most convenient to work with a partner, one person stretches the cable and rotates the handle, and the second pushes it into the pipe;
• The cable should pierce the blockage several times;
• Remaining debris is removed by pouring a lot of water into the pipe.

Chemical sewer cleaning

Remove organic blockages, you can not only mechanically, but also with the help of chemical compounds

At the same time, it is important to remove the water in front of the cork, a large concentration of the drug increases its effectiveness

A common tool for cleaning sewer pipes is the Mole composition. This is sodium hypochlorite dissolved in water. It is poured into a clogged pipe and kept for 4-8 hours, then the sewer is washed with water.

If there is no Mole, then you can remove the blockage with alkali or acid. In terms of chemical composition, Whiteness bleach is similar to the composition of the Mole. But you can use other substances:

• Electrolyte;
• Caustic soda;
• Vinegar;
• Lemon acid;
• Cleaning preparations (for example, Sillit or Dometos);
• Oxalic acid.

A sewer system clogged with a rag can be cleaned with a plumbing cable, but only indoors. If the bed or the main riser is clogged, where the cable will fold into loops, use a hard wire.

1 Causes of blockage in the drain in the washing machine

Washing machine repair specialists distinguish between 2 types of blockage:

• mechanical;
• natural.

The main factors of mechanical blockage are small objects that, penetrating into the fluid drain system, completely block it.

Washing machine drain pump

We recommend to read

• How to clean the washing machine tray?
• Washing machine does not wring out
• Washing machine pump repair and error codes

Home appliance repair specialists note that small objects most often get stuck in the filter cell, which thereby block the drain system in the washing machine. Among them are the following:

1. Broken zippers and buttons from clothes.
2. Small coins, toys, toothpicks and other small contents of pockets.
3. Tiny pieces of clothing and bed linen, including decorative items.
4. Small components from the upper part of the underwear (foam cups, fasteners, bones).

The natural type of blockage, in addition to small objects that cause filter clogging, is caused by:

1. Animal fur, hair or down.
2. Small particles of pile, cotton wool and other minor dusty elements.

How to prevent blockages - preventive measures

To prevent clogging of the drain hose and prolong trouble-free operation, you need to follow simple rules and regularly do preventive maintenance:

• inspect pockets and remove all items from them, remove brooches and other removable jewelry from clothes;
• for fleecy and delicate fabrics, underwear, special covers for washing should be used;

  The use of special covers for washing will help to avoid small items falling into the drain.

• fasten locks, hooks and buttons on garments before washing;
• choose powders and gels with the addition of salt-dissolving components or separately add hard water softeners;
• for water rich in lime and salt inclusions, it is better to install an additional filter on the inlet pipe, so you can avoid rapid overgrowth and clogging in all units of the machine.

Caring for a household assistant, a washing machine, regular maintenance and prevention will help extend the life of the unit and ensure uninterrupted and high-quality operation. Then all household chores will not become a burden, and things after washing will shine with cleanliness and freshness.

Timely preventive measures will help to get rid of the need to clean the drain hose of the washing machine:

At least once every three months, it is recommended to clean the drain filter located on the front of the washing machine from debris.
Periodically, it is recommended to carry out a full washing cycle at a temperature of 90 degrees without laundry, but with soda added to the drum.
Before washing, clothes must be fastened with all buttons and hooks.
When washing small items in the washing machine, such as underwear, socks, it is recommended to use special bags, otherwise there is a risk of things falling into the drain hose.
Before loading clothes into the washing machine, it is important to remove household debris from pockets.

Hose removal process

Despite the differences in the design of washing machines, the principle of dismantling is common. The hose is connected to the pump and exits through a special hole in the rear wall. Less often, there may be an adapter on the back wall to which the hose is connected. We analyze the technique in the following order:

1. We remove the desired wall. Depending on the manufacturer, it is necessary to remove the front, rear side cover or floor of the washing machine.
2. Loosen the clamp that secures the hose to the pump.
3. Disconnect the drain hose from the pump.
4. We remove the fastening of the part to the back wall. In some models, this is not required, since the back wall is removed during disassembly to access the pump.

If the front cover must be removed to gain access to the pump, the detergent container must first be carefully removed. As a rule, it is attached to a plug, which will be accessible when opening the powder container.

Drain filter clogged

Most often service center specialists lg are faced with blockages in the drain filter, such a malfunction can also be eliminated independently. Coins forgotten in pockets or small clothes fall into the filter. To determine the presence of third-party elements in the filter, you need to open it, for this, find a small door on the front panel of the machine, it is located at the very bottom on the right side of the case.After opening it, unscrew the cap counterclockwise, so you can get to the filter and pump.

It is necessary to visually inspect the device for blockages and clean it with improvised means. If a coin is stuck in the filter, you can get to it with the help of thin-nose pliers or tweezers, it will not be difficult to remove clothing items with your hands. In most cases, this will solve the drain problem, unless of course the blockage has led to a more serious breakdown.