How to clean your air conditioner at home

Signs of pollution

In order to understand whether the old device needs cleaning, you need to carefully look at its work, in which there should not be even minimal deviations.

Experts recommend paying attention to the following characteristic signs of clogging:

• the presence of constant or periodic noise and cod;
• excessively loud operation of the ventilation system;
• consumption of a large amount of energy;
• power reduction;
• the appearance of tapping;
• the presence of a specific smell of mold and dampness;
• the appearance of sounds of boiling water;
• low level of room cooling;
• the presence of leaks.

Most of the problems arise from the accumulation of dust and dirt on indoor unit radiators and outdoor, which leads to a deterioration in heat transfer between freon and air. This factor causes the compressor to turn on more often, which leads to its rapid wear, as well as an increase in electricity consumption. The constant operation of the compressor and an increase in the power of the device does not give the desired effect due to the difficult passage of air masses through filters, the cells of which are filled with dust and dirt.

The appearance of an unpleasant odor is provoked by microorganisms that live and multiply in the indoor unit, in which drops of condensate create a humid and warm environment. Extraneous sounds and noise provoke dust that accumulates on the working elements of the device and interferes with their work.

Cleaning the indoor unit

Once you have access to all components of the indoor unit split systems, you can start cleaning them.For this, it is not recommended to use hard brushes or metal objects that can damage the heat exchanger or the freon line.

Cleaning the air filters

Clean the filter in DIY air conditioner It is not difficult, the main thing to remember is that this procedure should be carried out regularly, at least once a week. To remove accumulated dirt, it is recommended to soak the filter elements in water with detergent foam for 30 minutes. And then rinse thoroughly with clean water and dry well before installing in the air conditioner.

Cleaning the air filters from dust

It should be noted that it is difficult to clean the air filters of duct, cassette or ceiling type air conditioners, because the indoor unit of such devices is located in the ceiling.

Fan cleaning

The fan of the indoor unit of the air conditioner also needs to be cleaned regularly. It is a roller that drives cool air into the room. To complete the task, you can dismantle the fan or wash it without removing it from the case. If the second option is selected, to remove dirt, the blades should be treated with soapy water, and then turn on the split system at minimum power.

Be prepared for the fact that the debris accumulated on the blades will fly to the floor, so first cover the part of the apartment under the air conditioner with old newspapers. After 15 minutes, turn off the device and remove any remaining dirt with a soft sponge or brush.

Removing dirt from vents

The top panel of the indoor unit is equipped with holes for air to enter the split system. You can clean them with a cloth dampened with soapy water.

Cleaning the heat exchanger

If the owner of the air conditioner has decided to monitor the cleanliness of the device on his own and perform its maintenance without calling the master, do not forget about regular maintenance of the heat exchanger. It is necessary to remove accumulated dirt from this part of the device at least once a year.

To get to the heat exchanger, you will have to remove the grate. After this, dirt can be easily removed with a vacuum cleaner or a cloth dampened with soapy water.

But you need to do this carefully, as you can easily damage the heat exchanger or injure yourself.

Cleaning the heat exchanger

During cleaning, special attention should be paid to the appearance of the heat exchanger. If signs of corrosion are found, it is necessary to contact the service center, since such damage is dangerous due to freon leakage.

Removing bad odor

To eliminate the unpleasant odor that may eventually appear from the air conditioner, it is necessary to carry out antiseptic cleaning. To do this, 0.5 liters of alcohol-based liquid antiseptic (can be bought at a pharmacy) is poured into a spray bottle and sprayed near the radiator with the air conditioner turned on. Small drops are drawn in and after ten minutes the unpleasant odor disappears.

Cleaning the drainage system

Air Conditioner Drainage System also needs cleaning. Otherwise, the device will leak and the outgoing air will acquire a putrid odor.

The cause of a clogged drain tube can be both dust and mold. To clean it, use one of the following methods:

• a soapy solution is passed through the evaporator, which washes away dirt and dissolves grease;
• purge the disconnected tube (drainage) with a vacuum cleaner, however, this option is applicable only if the drainage system is not very clogged;
• the completely disconnected drain pipe is washed and blown along the entire length, treated with a disinfectant (this is the only way to clean the system from heavy contamination).

To disinfect the tube, various agents are used, such as chlorhexidine.

To check the quality of cleaning, you can pour 1.5 liters of water into the drainage system. With a positive result, the liquid will flow out unhindered.

The video below will help owners of air conditioners clean the indoor unit from contamination:

Features of cleaning air conditioners from different manufacturers

Air conditioning systems are produced by different companies. It is necessary to understand in advance the basic nuances of cleaning devices from various manufacturers.

haier

Cleaning air conditioners manufactured by Hayer is simple, as they are easy to disassemble. When cleaning the indoor unit of the devices, use a regular brush dipped in soapy liquid. If there is too much dirt in it, the block is pre-purged with a vacuum cleaner.

LG

For most models of systems manufactured by LG, the external unit is most often contaminated. To clean it, perform the following sequence of actions:

• disconnecting the device from the power supply;
• removal of all debris from the body;
• removal of the protective cover;
• blade cleaning;
• flushing the radiator.

Ballu

Owners of Balu air conditioners have difficulty cleaning the heat exchanger, which is located in the internal unit of the system. To clean the heat exchanger yourself, you will have to perform the following steps:

• removal of the front cover of the split system;
• removing the mesh responsible for air filtration;
• dry cleaning of the surface of the heat exchanger with a vacuum cleaner and a brush;
• removing stubborn dirt stains with a steam cleaner.

Daikin

Some owners of Daikin air conditioners complain about the rapid clogging of filters. To clean them, you will have to remove the cover of the indoor unit. After that, you need to get the filters and put them in a container of water. They are soaked for 20-25 minutes and wiped with a rag to wipe dirt from the surface. After drying, the washed filters are installed in place.

Mitsubishi Electric

The split systems from Mitsubishi Electric periodically get dirty drainage system. It is clogged not only with grease or dust, but also with fungus and mold. If the drainage is not cleaned in time, water will begin to flow into the room. To clean the drainage system, use solutions for washing dishes and household appliances.

Fujitsu General

In some Fujitsu General models, due to the accumulation of dirt, the fans in the indoor unit break. To prolong their service life, you will have to periodically clean the blades. This can be done mechanically, using a brush or a small brush. You can also blow it out with a compressor.

Mitsubishi Heavy

The most common breakdown of systems from Mitsubishi Heavy is considered to be leakage, which appears due to clogged drain pipes. To prevent air conditioning systems from leaking, it is necessary to regularly clean the drainage pipes. To do this, you will have to disconnect them from the pallet and rinse with soapy water.

Toshiba

Some Toshiba models start to perform worse due to the accumulation of dirt in the evaporator. To clean it, you will have to disconnect the air conditioner from the power source and open the indoor unit. Then the grate is removed and the dirt is washed off the surface.

Panasonic

The main component of Panasonic air conditioning systems are filters. They are cleaned in the same way as in other models of split systems.

Hyundai

When cleaning devices from Hyundai, special attention should be paid to the indoor unit and filter meshes, which are located under the front panel. If you do not wipe them, the air conditioner will stop cooling the air and start to get very hot.

Hitachi

When cleaning devices made by Hitachi, the external unit is the most difficult to clean. It is better to entrust such work to specialists who will do everything with high quality.

Samsung

Old models of Samsung air conditioners are poorly protected from mold and mildew. Most often they appear in the drainage system, as there is high humidity. When a fungus appears, it will be necessary to treat the drainage system with antiseptic mixtures.

Electrolux

Inside the split systems from Electrolux, special radiators are installed, which must be cleaned regularly. In this case, it is necessary to carry out dry cleaning without the use of water. It is necessary to blow out the radiator with a compressor or a vacuum cleaner set to air blowing mode.

Midea

Air conditioning systems manufactured by Midea need to be cleaning the indoor unit. This procedure consists of several successive steps:

• cleaning the drainage system;
• blowing the radiator;
• washing fan blades;
• filter cleaning.

Kentatsu

Split systems created by Kentatsu need to be cleaned 2-3 times a year.This applies not only to the internal, but also to the external unit. It is in it that a lot of dirt and debris accumulates. If not cleaned, the A/C compressor will overheat, resulting in damage.

Self cleaning

To clean the air conditioner yourself at home, you need to familiarize yourself with the features of cleaning the various components of the system.

Split impellers

It is recommended to clean the impeller of the device without removing it. To do this, just get rid of the external unit and remove the filters. Then you need to use a vacuum cleaner and blow out with it all the dust that has accumulated on the surface of the impeller.

outdoor unit

If the air conditioning system began to circulate air more slowly in the apartment, it is necessary to clean the external unit. To do this, the protective cover is removed and large debris that has accumulated under it is removed. Then it is necessary to wash the blades of the external fan and wipe the radiator from dust. This must be done very carefully so that no liquid gets into it.

filters

It seems to many that it is difficult to clean dust filter screens, but this is not so. They are located under the top cover of the device and therefore they are easy to reach. To do this, remove the cover and remove the dirty filters.

Then they are carefully brushed and washed in warm water. The filter screens must be dried before being put back in place.

radiator

Cleaning the radiator is easy, since you don’t need to remove or disassemble anything for this. The only thing you have to do is to remove the top cover and filters that are above the radiator. After that, it is necessary to wipe the surface with a brush with an elongated pile and vacuum the radiator.Then the filters with the top cover are installed in place.

fan

If the air circulation deteriorates, the fan must be cleaned. To do this, you will have to get rid of the top cover and dust filter meshes. Then a little soapy solution is applied to the fan drum and the blades begin to be wiped. After that, you need to turn on the air conditioner so that the cleaned dirt is blown out.

Drainage systems

The drainage system is responsible for draining the liquid from the heat exchanger. It consists of a pallet and a special drainage pipe. Before cleaning, the pallet must be disconnected from the tube and the board. Then it is washed with cold water and soapy water. The drain tube is blown out with a vacuum cleaner or a compressor that blows out air.

heat exchanger

Often a lot of dust accumulates on the surface of the heat exchanger. Over time, this leads to the formation of a dense film of dirt, due to which the air conditioner begins to overheat. To get rid of dirt, you will have to use a steam cleaner. Remaining dust is cleaned with a cloth or fluffy brush.

Rotary turbine

The rotary turbine is an important part of the system, as it is responsible for air circulation. When cleaning, it is better not to remove the rotor from the housing, so as not to accidentally damage anything.

You can clean it from dirt with detergents and warm water.

Cleaning is carried out very carefully so as not to damage the turbine blades.

Evaporator grilles

The evaporator grate is a tube system that is responsible for conducting freon. It must be cleaned periodically, as a lot of dust accumulates on the surface. To wash the grate, use warm water and a soft brush. However, before washing, it must be vacuumed to remove large pieces of debris.

outdoor unit

The outdoor unit gets dirty quickly and is therefore cleaned regularly. The surface of the block is wiped with a damp cloth dipped in soapy water.

2 id="chego-zhdat-ot-gryaznyh-filtrov">What to expect from dirty filters

The degree of contamination of the filters of a home air conditioner determines not only the efficiency of its work, but also the quality of the air itself. Let's list the main negative consequences of dirty filters. The air conditioner performs its functions much worse. In other words, in the summer it will not cool the air so well, and in the winter it will heat it up badly. Accordingly, other functions, whether it be dehumidification or air circulation, will be performed inefficiently.

The air conditioner will last less. If you ignore filter cleaning, the device, due to a decrease in efficiency, will work longer before it reaches the set temperature parameters and, accordingly, will run out of its resource faster. Due to the deterioration of heat transfer, the climate system will overheat and may fail, and the breakdown can be either small or requiring a complete replacement of the compressor.

Emits unpleasant odors. Passing through clogged filters, the air absorbs and accumulates its aromas, which do not cause delight when you turn on and use the device. Especially the smells of cooking and pets.

The filter becomes a breeding ground for bacteria and is harmful to health. It should be remembered that filters clog not only mechanical particles, but also various microorganisms, bacteria, viruses, etc., which is why entire colonies of such residents are formed in them.And some, such as mold and fungus, grow and multiply due to the increased humidity while the system is operating in cooling mode. Indeed, at the moment of cooling, the moisture in the air condenses on the heat exchanger and flows into the drainage hose. Dust, absorbing moisture, creates ideal conditions for the growth of these intruders.

In the end, this will lead to a significant part of them getting into the air, to a greater extent mold spores, negatively affecting the health and well-being of a person as a whole. Young children and the elderly, as well as anyone with respiratory health problems, are especially susceptible to such exposure.

Excessive noise and a wet spot under the air conditioner. When the filters become too dirty, they create a significant enough resistance for the passage of air, and therefore increases fan noise level.

If the filters are heavily clogged, it is possible to freeze the unit and form condensation on the plastic of the case, having accumulated, it drips directly onto the floor, or flows along the wall, with all the ensuing consequences.

How to clean the indoor unit of the air conditioner at home

Before inspection, the device must be unplugged. To get inside, you need to open the cover on the front side.

Required Tools

• Small brush. A toothbrush will do.
• A vacuum cleaner. It is more convenient to work with a small hand vacuum cleaner.
• Soft cloth.
• A container of water for wetting a rag.
• Soap or other product that does not contain chemically active reagents. There are special compositions for the care of prefabricated elements. They contain antiseptics that prevent the growth of bacteria.In addition, they protect metal parts from corrosion.
• Gloves and respirator. There will be little dust and dirt, but contact with them is harmful and unpleasant.

Processing filter elements

Each split system has filter screens, usually made of polymeric materials. They should be removed and wiped with a damp cloth. When removing the plate, lift it up and pull it down towards the room.

Cleaning the outdoor unit of the air conditioner

Turn off the power.

Remove the top panel.
Remove large debris that you find in the case.
Use a vacuum cleaner with a soft bristle attachment to remove dust from hard-to-reach places. Be careful not to damage the parts - many components can be easily bent.
Unscrew the grate on top of the air conditioner

The fan usually rises with the grille, so support it carefully to avoid damaging the electrical connections.
Wipe the fan with a clean damp cloth.
Clean the condenser - it has a smooth, even surface, so the process will not take much time and will not be difficult.
Assemble the block. Return the fan and grille to their original position and screw them back to the unit

Wipe the panel with a damp cloth beforehand;
Leave the device turned off for 12-24 hours.
Restart the air conditioner. Turn the thermostat to the "Cool" position and set the temperature of the unit so that it turns on. Wait 10 minutes.
Check for correct operation. Remove the insulation from the pipes that come out of the base of the air compressor. One should be cold and the other warm.

Why is it important to work with professionals

Now there are many companies offering cleaning services for household and climate equipment.

Here are just some of the works that are offered to clients:

1. Cleaning.
2. Scheduled technical inspection, which includes all air conditioners.
3. Diagnostics.
4. Repair.

Devices can be very different from each other in practice. Many order services from professionals in order to get a clear example of how to proceed.

Simple cleaning is easy to do on your own, but this is not enough for a full service. While the air conditioner is running, the amount of available refrigerant decreases, by 7% or more each year. The volume of this substance must be replenished, which is impossible without the help of specialists. You will also need to clean the fan.

If the work has ceased to be stable for no apparent reason, they also call specialists working in a particular service. In the presence of mechanical damage, simple cleaning will not be enough, repair and full replacement of parts will be required.

Automatic cleaning of the air conditioner

Most modern air conditioners and split systems have advanced functionality, which includes an automatic cleaning system. It is performed in a simple way: air flows empty through the system. This achieves drying of the heat exchanger and various internal parts of the device. Some new models of air conditioners use an ionic air purification system. A special device helps to bind nitrogen and oxygen ions with dust particles, they are thus charged and "caught" by the dust collector.Some other models use ionized water dust in their work, as well as air mass ionization systems and multi-stage filtration. If the air conditioner has a built-in touch sensor, then the device can independently take into account the composition of the air and start a self-cleaning system at the right time. Maintenance of the latest generation of air conditioners is greatly simplified. However, it should be remembered that no device can get the filters and wash them with soapy water! Therefore, even innovative systems need manual cleaning. Recommended: Block gas boiler control (controller): what is this device and how does it work

1 Choice of disinfectant

There is a wide range of air conditioner disinfectants on the market today. All funds are intended for the maintenance of household or car split systems. It can be:

• foam products in cans;
• liquids for disinfection of the air conditioner based on alkali, which are sold in plastic bottles and canisters;
• often, home craftsmen use various medical antiseptics for air conditioning, for example, chlorhexidine, as an economy.

It must be clearly understood that the disinfection of the air conditioner in the house or in the car is a mandatory preventive measure. Service implies incomplete disassembly and a slight degree of contamination of the device. From this follows a number of recommendations regarding the choice of disinfectant:

• If the fan impeller or evaporator has a large layer of dirt, then before disinfection it is necessary to clean all the elements with a strong agent such as Carlyclean, Top House, Cond Cleaner.
• The best cleaning method is a penetrating foam in an aerosol bottle. According to the manufacturers, after cleaning, the composition leaves an antibacterial protective film on the heat exchanger, which lasts 2-3 months.
• It is possible to clean air conditioners with medical antiseptic solutions, but this is not very convenient. Unlike foam, the antiseptic does not penetrate into hard-to-reach areas enough. Moreover, this is a significant disadvantage during the purification of an automobile cooler.

Foam aerosols can equally well disinfect air conditioners both in apartments and in cars. There is only one condition: to disinfect the cooler in the car, you must purchase a special flexible elongated nozzle that is put on the cylinder (as a rule, it is included in the kit).

Procedure for general cleaning of the indoor unit

1. Buy a new filter.
2. Turn off the power.
3. Replace filter.
4. Clean the inner impeller of dust and debris with a conventional vacuum cleaner.
5. If the motor has lubrication holes, add 5 drops of a technical fluid specially formulated for electric motors.
6. Remove the plastic condensate tube and check it. If it is clogged, you can either replace it or pour a solution of 1 part bleach to 16 parts water through a funnel, but it is better to use special products that will help to carry out the procedure more safely.
7. Clean the drain tube. Use a special cleaner and a toothbrush.
8. Reboot your device. Connect drain tube and restore power.

Instructions for cleaning the outdoor unit

The most difficult thing is to clean the external unit of the equipment yourself.Usually, the outdoor unit is mounted in a window opening or on the wall of the building from the outside, so it is almost impossible to get to it without special equipment, although this unit must be serviced at least 2 times a year.

The structure of the outdoor unit

It is recommended to clean the outdoor unit annually, as it becomes clogged with pollen, plant fluff, leaves and insects, but working with it is difficult due to installation features - most often the outdoor unit is located on the outer wall and cannot be reached without special equipment.

Before starting work on cleaning the external circuit, you should understand its structure. It consists of the following elements:

• the fan is designed to maintain the optimal operating temperature of the heat exchanger;
• the condenser, installed near the fan, is made in the form of several copper tubes filled with freon;
• the compressor stimulates the pumping of freon from the condenser into the air conditioner. It is produced in the form of a piston or spiral type;
• the control board is rarely installed outside - usually it is located on the external unit;
• a four-way valve can only be installed on reversible equipment, when the air conditioner not only cools the air in the room, but is also able to warm it up;
• fitting connections are necessary to fix the tubes through which freon moves within the entire system;
• the filter protects the compressor from dust and fine solid particles;
• a protective cover separates the internal elements from external influences.

Cleaning order

You can clean the outdoor unit on your own only when it is possible to safely get to its elements, for example, in a private house from a ladder or if the equipment is installed on a loggia or balcony. It is not allowed to work at height without special permission and equipment.

Step by step process:

1. as in the case of the indoor unit, the equipment is first disconnected from the network;
2. the front panel is removed;
3. large particles of dirt and debris can be removed simply by hand (you should first wear gloves);
4. then, with the help of a vacuum cleaner, they penetrate into the far corners and remove deposits of dust;
5. the fan is also processed with a vacuum cleaner, but if it is very dirty, you can use a damp cloth, while you need to make sure that water drops do not get on the unprotected contacts of the equipment. If a foam cleaner is used, it is recommended to close the contact group with a film before starting work;
6. dust and dirt from the condenser is removed with a damp cloth;
7. after completing all the procedures, you need to clean the front panel;
8. before installing the panel, you need to make sure that all processed components and assemblies are dry;
9. cleaning of electrical components should be entrusted to professionals.

Connect the equipment to the network only after the complete drying of all parts.

How to clean your air conditioner at home

Knowing how often you need to clean, you need to figure out how to clean properly appliance at home. The question of how to wash the air conditioner yourself can be confusing, but in reality there is nothing complicated about it.

To start on the floor under the indoor unit you should put something on which dirt will pour in order to wash the split system without soiling the apartment. Then the front cover and protective mesh are removed. Removing the cover of the air conditioner yourself is not difficult. In the case of a bk 1500 air conditioner, you will have filters, a drainage system, a radiator with an evaporator and, of course, a fan in front of you.

How to clean the air conditioner filter

If you want to clean the split system yourself, cleaning the filters is a mandatory step. Filters are the first thing that catches your eye when you remove the cover of the bk 1500 air conditioner. It looks like a fine mesh, dotted with plastic partitions.

Depending on the company, their number varies from one to three. These items require frequent washing. You can even understand how to clean the air conditioner filter intuitively. Washing with cold water, vacuuming or a regular brush is suitable.

The filters must be dried before they are returned to their place.

How to clean the drainage system of the air conditioner

The key to how to clean the drain is in its device. The system consists of a tube and a tray that collects liquid. To remove the latter, it is disconnected from the board, then detached from the drain tube. It is enough to rinse the bath with water.

Now about how to clean the drain pipe of the air conditioner. Usually, a compressor or a vacuum cleaner switched on for blowing is attached to it, and it is simply blown through with a powerful air stream. After the channel is treated with chlorhexidine. It is pumped in and left for 15 minutes. Then the blowing procedure is repeated. These actions will ensure proper cleanliness of the air conditioner drain.

To check the system at home and make sure everything is done correctly, one and a half liters of water is poured into the drainage. The absence of leaks is a sign of high-quality cleaning.

How to clean an air conditioner fan

After removing the filters, the dust is blown out with a vacuum cleaner with a blowing function or with a can of compressed air. Then the drum blades are covered with soapy water. It is better to do this with a suitable brush.

The detergent can be both laundry soap and dishwashing liquid. The fan will get rid of dirt itself when you turn it on. Pre should be placed under the diffuser grille some kind of film.

How to clean an air conditioner radiator

Unfortunately, there is no way to clean the radiator thoroughly at home. You will have to limit yourself to surface cleaning.

The radiator of the bk 1500 air conditioner is located under the front panel, which will have to be unscrewed. It is cleaned with an ordinary brush, preferably with a long pile. Then, by switching the system to recirculation mode at a minimum temperature, it is required to spray about half a liter of antiseptic in the air intake area.

How to clean an air conditioner evaporator

The evaporator is cleaned in the same way as the radiator of the bk 1500 air conditioner, but the brush must be driven exclusively from top to bottom, in order to avoid damage to thin plates. The dirt film from the heat exchanger is perfectly removed by a steam cleaner. Then proceed to the treatment with an antiseptic.

You have received enough information on how to clean the air conditioner yourself, but still this does not exhaust the maintenance of climate technology.One way or another, the split system, as it is used, will lose refrigerant, approximately 5% per year, if there was no depressurization.

Therefore, even knowing how to clean the split system yourself, you won’t be able to do without the services of specialists. From time to time, you will have to send the air conditioner to a service center for verification, and then it will delight you with a long and flawless service.

Cleaning is the main type of care

When purchasing a window air conditioner, you should be aware of the degree of responsibility for the condition of the device. Without proper care, the device will not last even a month. In order not to throw a lot of money down the drain, it is worthwhile to clean the filters and other parts of the air conditioner from dirt in a timely manner.

When wondering how to clean a window air conditioner, it is worth understanding that all further operation of the equipment depends on a high-quality cleaning procedure. That is why cleaning should be taken as responsibly as possible.

The main contributor to pollution is the spread of mold. The fact is that a non-working device is a favorable environment for the development of bacteria, dust accumulation and mold development. Therefore, do not leave the air conditioner turned off for a long time. Cold air currents of operating equipment simply do not allow harmful substances to accumulate.

Timely cleaning of equipment has a positive effect not only on the operation of the device, but also on human health. The cleaning procedure helps to remove harmful bacteria from the device and prevents their growth.

Recommended tools for the job:

• Various screwdrivers
• A vacuum cleaner
• Rags
• Dust can
• Cleaning brush with long handle
• Detergent in a spray bottle
• Oil
• Cooling effect plate
• Some models use disposable filters, so when preparing for cleaning, you should take a replacement filter.

Steps for cleaning a window air conditioner:

1. Disconnect the device from the network
2. The window air conditioner needs to be disassembled. To do this, you should familiarize yourself with its device so as not to damage the parts.
3. Remove the top cover of the device
4. Carefully remove and pull out the main filter. A sufficiently large amount of dust accumulates in the filter, so be sure to rinse it under running water and wipe it with a detergent with a disinfectant effect to destroy harmful bacteria (the water temperature should not be higher than 40 degrees)
5. Turn on the device at minimum power. Spray detergent onto it, watching for drops of liquid to enter the air conditioner.
6. Wait until the device is completely dry. After that, put the filter in place or install a replacement
7. The front panel of the air conditioner should be treated with detergent and wiped with a soft cloth.
8. The body should also be washed first, then wiped with a dry cloth.

A complete cleaning procedure should be carried out at least twice a week.

The external air filter of the appliance needs maintenance once a week.

The internal heat exchanger must also be cleaned once a year:

• Remove the top panel
• Remove air filter
• Clean the fins of the device with a vacuum cleaner or a brush. Make sure that the ribs do not deform. This reduces the efficiency of the air conditioner. The edges of the ribs can be pointed, so you should work carefully.

It is recommended to clean the external heat exchanger of the device every spring. All modes of operation should be checked.At the slightest problem, you should contact the experts.

How to clean the outdoor unit

The outdoor unit is located on the side of the street, so you need to get close to it. You can use the ladder, try to get through an open window or from the balcony.

For cleaning, do the following.

1. Disconnect the equipment from the power source. Wait for the complete shutdown.
2. Remove the top panel by releasing the retaining elements. Put the lid inside the house so it doesn't get in the way.
3. Remove large debris and dust particles with a brush.
4. Use a vacuum cleaner to remove any remaining dirt. Do not touch the power supply with wiring.
5. Once again, clean the surface of the elements with a brush and wipe everything with a damp cloth.

Connect the air conditioner to a power source only in a dry state.