How to open an interior door without a key: the best ways to open a slammed door

What will you need

• Lockpick-tensioner (preload): many items can serve as your tensioner. They should be strong and not break when the cylinder is pulled, and be thin enough to fit slightly into the keyhole. The end of the tensioner should not be too thin and fall into the keyhole to the very end.It should also be small enough to leave enough room for the second pick to maneuver freely when both tools are inside. You can use a small hex wrench that tapers at the end or a flat head screwdriver.
• Hook Pick: You can use a pin or paperclip. To make a pick from a paperclip, straighten it and bend one of the ends 90 degrees. You can also bend one end into a small loop. Sharp-nosed pliers will make the process much easier. Choose objects made of strong metal for picks, otherwise they will bend under pressure on the pins. Picks made from a hacksaw blade work best. Hair bobbins are also a good pick material. Cut off the rounded ends of the invisible and make a right angle out of it, and then bend one of the edges 90 degrees.

How can you close an interior door in an apartment, house without a key, without a lock from the inside, so as not to open it from the outside?

If you have a teenager child, then he needs personal space. Because teenagers love being alone. In this case, if you do not want to install a lock on the door for him, then you can purchase or make your own sign with the inscription "Do Not Disturb". The child will be able to hang out such a sign and no one will bother him. This is appropriate if you have only one child.

If you have another baby, then this sign will not help. The child will still visit the room of an older brother or sister. On the back of the sign you can write "Please clean my room." You can find another way to close the doors in an apartment and a house without a key in the video below.

This is interesting: How to putty a doorway after installing the door

How to disassemble the handle

Before you start repairing the front door handle, you must remove its mechanism. However, if the handle broke off, then you don’t have to remove it, it will be enough just to disassemble it.

Push construction

To change the pressure model, special tools are not needed - it is enough to have one screwdriver. First you need to remove the decorative rosette, which can be screwed on from below with a small screw. The socket is removed through the handle. Then you need to unscrew all the other screws and screw ties on which the mechanism is attached. Now it remains just to remove the handle and remove the mechanism.

If a design is installed, which is one large overlay (such products are often found on Chinese models), then it is removed differently. On the inside of the canvas under the overlay, you need to unscrew the fixing screws (there are 2 of them), after which the handle is completely removed along with the overlay, sometimes from both sides at once.

rotary model

If the rotary model is broken, then in addition to a screwdriver, you will need a thin metal object (awl, knitting needle, etc.) to dismantle such a product. First you need to remove the decorative sockets. A technological hole will open on the side. Insert the sharp end of a thin metal object into it and move the pin away. After that, you can remove the handle and the entire broken mechanism.

How to open the lock without a key on the front door

Locks with a complex device and several levels of protection are installed on metal entrance doors for apartments and houses.

With master keys, you can only try to open a Chinese-made mechanism.High-quality locks will have to be unlocked with the help of a specialist or hacked, which can damage the device and deform the door leaf. The process will depend on the type of locking mechanism.

cylinder

If the key to the cylinder lock is lost, and it is impossible to make a duplicate, you will have to master the role of a professional burglar and unlock the door using special master keys. They can be bought at a hardware store or made from paper clips, hairpins. How to open a door lock with a cylinder mechanism:

1. Take 2 paper clips or hairpins. Bend one at a right angle, it will serve as a tensioner, the second - in the form of a hook.
2. Insert the tensioner into the upper part of the mechanism, turn in the direction of the opening of the lock, creating tension.
3. Insert the second paperclip, hook the first pin, give it a position corresponding to the opening. The click and rotation of the cylinder will indicate that the pin has taken the desired position.
4. Repeat the manipulations with the rest of the pins.

If the master keys did not help, the lock will have to be picked. How to do it:

1. Insert a flat screwdriver deep into the larva. Try to turn by applying force. If it works, take out the tool along with the mechanism, open the door.
2. If it doesn’t work out, take a drill and a metal drill (4–5 mm). Drill the larva through and remove the mechanism.

Suvaldny

• Preparations for raising immunity in children: which are effective
• Comparison of drugs Diclofenac and Movalis
• What is an inverter air conditioner

This lock consists of several plates with different notches and grooves. The complexity and safety class of the device depend on their number. To break the locking mechanism, you need to achieve displacement of the plates.How to open an iron door without a key with a lever lock:

1. Make a roll by bending the tip of a thin screwdriver.
2. Make a master key by crocheting and sharpening the tip of the knitting needle.
3. Insert both makeshift picks into the lock mechanism.
4. Push the roll up to the stop, turn, creating tension. Move the hook, shifting each plate in turn and simultaneously turning the roll. When you manage to shift all the levers, the door will open.

If the lockpicks didn't help, hack the device by damaging the secret anchor point:

1. Drill a hole at the location of the shank attachment.
2. Insert a paperclip or stiff wire hook.
3. Turn the crossbars, open the door.

Rack

You can break the rack lock only with a crowbar, damaging not only the mechanism, but also the door frame or leaf. How to try to open the device without a key:

1. Pick up 2 thin screwdrivers that can enter the keyhole at the same time.
2. Insert 1 tool into the hole, “catch” the notch of the crossbar with it and move it to the side. Insert a second screwdriver, fix the position of the valve.
3. Repeat the manipulations, shifting all the crossbars in turn until the door opens.

The second way to break the rack lock:

1. Drive a wedge of softwood (spruce, pine, cedar) into the keyhole.
2. Pull out, cut the formed notches a little.
3. Unlock the closed door with the received wedge-key.

hinged

This type of lock is opened with a pin, paperclip, or stiff wire. Sequencing:

1. Bend the edge of the handy tool with the letter G. Insert it into the upper part of the well, trying to get into the latch.
2. Turn the master key until the locking element is unclenched and the bracket is released.

If it was not possible to open the lock without a key, it can be cracked in one of two ways:

1. Insert 2 open-ended wrenches into the bracket so that each of them captures one shackle, and their side edges are in contact. Pull the free edges of the tools together until the clip breaks.
2. Screw a self-tapping screw into the larva, and then pull it out together with the mechanism using a nail puller.

French

This type of mechanism cannot be opened without a key and the help of a specialist. On your own, the French lock can only be broken, while damaging the door leaf. This is done in the old fashioned way:

1. Insert a crowbar or a sturdy screwdriver into the gap next to the lock.
2. Use the device as a lever: press until the door leaf is deformed and the lock latch is released.

Various technical problems, and how to open the door lock with them

There are a lot of reasons why a lock can jam. It is often impossible to find out for sure why the door is stuck. We will describe to you several ways to hide the lock for different occasions. You can try out several of them.

What to do if the lock is jammed:

1. If the wooden door does not open, then it may have swelled due to high humidity. In this case, it needs to be dried with the help of heaters, after which it will sit down a little and the lock will quietly open. The open door must be cleaned of swollen paint and hung in deformed areas.
2. Also, sometimes the door does not open due to skew. This can happen due to weak loops that are unable to support the weight of the canvas. To fix this problem, you will have to stick a screwdriver into all the slots in the door and shake it.Where the screwdriver will sit firmly, and the problem lies. In this place, you need to insert a wooden or metal lever, for example, the same screwdriver, and lift the door, trying to put it in place. After the problem is fixed, you can check if the key turns in the lock. If yes, then the reason is found.
3. If the key is turned, but the door still does not open, then most likely the case is in the tongue. When this element is stuck, then you can safely use a plastic card, ruler or knife. The card is inserted into the gap between the canvas and the box so that the plastic slides along the bevel of the tongue. The latch is pressed into the door, with the help of the card, and at this moment the handle goes down and the door opens. If the interior door lock is broken from the inside, then the same tools will come to your aid. In this way, you can crack the jammed lock yourself without damage.
4. If you opened a mortise lock, and your key broke off, then it will be quite difficult to get into the apartment. You can try to pry the pieces of the key through the keyhole with a jigsaw, but most likely you will have to remove the door from its hinges from the outside.
5. If the door closes when slammed, and the person forgot to remove the key, then you need to push it out from behind the lock. To do this, you can use a thin knitting needle or a thick long needle. If there is a gap under the door large enough for the key to fit through, a newspaper is inserted into it so that the dropped tool can open the lock.

It is quite possible to open the door on your own. One of the above methods will most likely work for you.

If you cannot get into the apartment, but you have nowhere to hurry, it is better to wait for the arrival of the master.By picking the lock yourself, you can accidentally break the door.

How to open the door if the lock is jammed

Do-it-yourself troubleshooting methods available:

1. To open the door if the lock is jammed, you can try to clean the lock slot from debris and dust.
2. Lubricate the device and try to open it again.
3. If the jamming of the mechanism occurred due to the fact that the door was warped, you need to find a wedge and insert it into the gap between the door frame and the leaf itself. This will allow you to return the structure to its original position. After alignment, the door should open.
4. The cross lock is easy to open without a key with a gum and a screwdriver. The gum is put into the well. After that, you need to insert and carefully scroll the screwdriver. A few turns will allow the gum to take the form of a key, and the lock mechanism will open.

The key is difficult and does not fully move in the keyhole

This means that the larva of the lock or the lever mechanism has broken. In such a situation, you will need a special tool and the help of professionals, because you will have to completely dismantle the device.

Problems with the lock may occur due to the key being inserted from the inside. If it is not turned, you can try to push the key with a hairpin or nail through the lock slot.

The lock mechanism, which has been in intensive use for a long time, must be lubricated. After processing, carefully insert and remove the key. You can lightly tap on it, while gradually pushing the key inward. Do this slowly so as not to break the device completely.

The promotion of the key may be hindered by a decorative bar. After removing it, the key enters the keyhole to the end.

Blockages in the keyhole are detected by highlighting it. This can be done with a flashlight or a mobile phone. Fragments of matches or small debris are removed with a metal hook or tweezers.

Key won't come out

If you cannot remove the key from the keyhole, do not make sudden movements so as not to break it. Try pouring kerosene or special machine oil into the slot with a syringe. After 10 minutes, shake the key, but you do not need to make any effort. If you managed to open the front door of the apartment, remove the lock and check its core.

Sometimes, when the door is open, the mechanism works, and when it is closed, a wedge occurs. In this case, you need to bore the doors.

Jammed tongue

It happens that the door does not open, even if you turned the key all the way. This problem can be easily eliminated by using any narrow metal object, such as a clerical knife, to open the lock. Any plastic card will do.

Pull the door leaf away from the jamb and insert an ax or crowbar into the gap. Thus, you will open access to the tongue. Try to push it with a knife into the lock, the door should swing open. After that, you need to disassemble the mechanism and find the cause of the breakdown. Most often this is a weakening of the spring.

The lock broke

In cylinder models, a broken larva can be removed with a drill or pliers. The outer part is bitten off or drilled out, and the remains are knocked out with a thick screwdriver and a hammer. After that, the crossbars located on the drive mechanism are shifted with a metal hook.

The main problem with lever locks is plate jamming. It is not easy to open such a mechanism, therefore, without the necessary skills, it is better to entrust the solution of the problem to specialists.

If the door lock is stuck, it is much easier to open it from the inside, because almost every home has the necessary tools. In addition, the mechanism can be easily removed from the inside, especially the overhead type.

In a cylindrical lock, you need to drill a slot in the armor plate. Make sure that the drill goes down, creating a support. This will help you quickly drill out the lock. Drill until you touch the first pair of pins. After that, with a 3 mm cutter, make an arch over the first pin. This will raise the code pin. The support lock can be removed with a feeler gauge and a magnet. Then drill out the lock mechanism to the end.

How to open a door lock without a key: front doors

If broken lock on interior doors - this, as they say, is not so bad, then the lock of the front door that does not open is already a real disaster! Everyone tries to solve this problem on their own, and the first thing that comes to mind is to enter the apartment through the window. It’s good when it’s a private house or the first floor of an apartment building - but what if you live on the second floor and above? "Mountaineering" without training and skills is a very risky undertaking. First you need to make sure that there are no other options. Or is it just that the whole arsenal of methods has been tried, and nothing helps to solve the question of how to open an iron door without a key?

1. The simplest situation is when the key is broken in the keyhole. In no case do we rush and do not try to pull out the chip with our hands. The most important thing is not to shove it deep. Instead, we knock on the doors of a neighbor (one, then another, and, if necessary, a third) and ask for rent pliers, wire cutters, an old-style jigsaw file.In general, with all this, we first try to grab onto the broken edge of the key and carefully pull it out, and if it doesn’t help, then we try to gently pick up the chip with a jigsaw file and pull it out of the keyhole a little. In general, we direct all our efforts to remove the chip - this must be done very carefully so as not to damage the secret.

2. The question of how to open the door of a house without a key is much more difficult to solve and to a greater extent it all depends on the type of lock - if a high-quality locking mechanism has a lot of degrees of protection, then you can not even think about opening the lock yourself. There is only one outcome - without special skills, you will not only not open the lock, but you will probably ruin it. In general, in such a situation it is better to turn to professionals. If we talk about simpler, as they say, mundane designs of castles, then among the one hundred percent methods, two options can be distinguished. Firstly, this is the drilling of a secret, after which it can be opened with any flat object. And, secondly, the elementary knocking out of the lock cylinder - just take it and hit the cylinder with a hammer with force. We beat so that the internal rotary cracker breaks - in most locks you don’t even have to put a lot of effort into this. The cracker breaks along with the screw holding the lock cylinder - after that, you just have to remove the cylinder and open the lock with a knitting needle or strong wire bent into the letter “L”. In general, the castle cannot be restored, but you will get into an apartment or a house, and this is already good.
3. How to open a lock without a key with a paperclip or hairpin.By and large, the operation is dubious, especially if we talk about a person who has never dealt with opening locks before - you can spend an eternity on this business and achieve nothing for one simple reason. Your type of lock cannot be opened at all in this way - not every locking mechanism can be opened with a paper clip or hair clip. And yes, it takes skill.

4. Alternatively, you can get a universal master key, but in this case, in order to solve the question of how to open a mortise lock without a key, you will need a certain amount of skill. In general, this is a delicate matter and has a lot of nuances - you can’t do without special preparation, knowledge of locks and other so-called “little things”.

   

   

   

   

   

   

   

   

   

   

In general, you need to look at the place - the circumstances themselves will tell you how to be and what to do. For example, in some cases, when the lock is closed for one turn, you can try to disengage it from the door frame using a crowbar or crowbar. You can also try to disassemble the lock - first remove the handle, thereby gaining access to the core. The doors can also be opened by cutting off the hinges - this option is possible if the hinges are not hidden, and there are no burglar-proof pins in the doors. Among other things, you can resort to extreme measures - simply put, put physical effort on the doors and knock them out. This number works great with wooden doors, but not with metal ones, and even more so with armored ones - it’s impossible to break them down without a press.

In conclusion, the topic of how to open the door without a key, let me remind you once again that it is better not to do such things on your own. There are organizations that provide professional assistance in this matter - you just need to call and wait for the arrival of a person who will do everything quickly, and most importantly, carefully, causing a minimum of damage to your doors.

What to do if the front door slammed shut?

How to open the front door is an obvious question for people who find themselves in an unforeseen situation associated with a broken door at the entrance to their home. It is not uncommon for a property owner, in despair, to turn the key too hard to open the lock, which further worsens the situation. In no case should this be done, since this will lead to an increase in the cost of repairing the lock due to its complication.

How can you open the door if you can't force the key? Hairpin! Of course, this option does not always work, but sometimes this method works. The hairpin breaks into two parts, one of which must be bent in order to be used as a lever. The second part sinks the pins in the mechanism. This method does not always work, it is suitable only for certain situations and types of locks.

If the door is equipped with a pin mechanism (cylinder), a hole is made in it, a wire is inserted, and the cylinder is rotated with a master key. There is another way to open the door on which the cylinder lock is installed - with a paper clip. The procedure is painstaking - it is necessary to comb the pins over and over again. A specialist can complete the opening of the lock in 10 minutes, and a beginner may need several hours. To save nerves, it is recommended to call the master.

How to open the front door with a lever lock? To do this, the canvas is pulled away from the box, and the levers are moved inward.

If the box is not strong enough (wooden), you can simply knock out the door, and then, removing it from the hinges, take it to a specialist for repairs.

What you need to know about replacing door handles?

Shooting and subsequent installation of a new door handle should be carried out taking into account all the features of the locking mechanisms, and also provide for the consequences of the replacement on the functioning of the door structure itself.

Installing a new handle on an entrance metal door will require certain skills in working with certain types of tools, with the metal itself, and knowledge of the basic safety rules.

A broken door handle doesn't always need to be replaced. Sometimes it can be repaired, which will save a lot of money. Door handles are usually repaired by the same companies that replace locks and doors.

Opening the locking device of the interior door

How to open a lock without keys without resorting to the help of a professional? If you are dealing with an interior door, then opening it will not be difficult for you. Most often, such door blocks are equipped with locking mechanisms, in the design of which a latch is provided on one side, and on the other there is a part resembling a keyhole. Considering that such doors are rarely locked, the owners lose their keys in the first weeks or months after installation.

Often the door is locked due to the carelessness of young children. Once in the room, they can slam the door, close it with a latch and, contrary to the persuasion of adults, do not want to open the door.Naturally, parents are afraid for their baby, as he remains in the room alone.

Because of this, it is important to open the lock as quickly as possible so that it retains its working condition afterwards. You can solve this problem by performing the following operations

find the keyhole and familiarize yourself with its design;
find a tool that is suitable for opening the lock;
start opening the door, doing everything very carefully.

Hacking lever and tongue locks

Lever locks are very popular due to their high degree of reliability. To open such a mechanism without a key, you must:

• Find a similar key, a heavy object to hit;
• Insert the key at 75%, pull and strike.

It may not work the first time, but the method is reliable.

Another type of lever lock - single-row and double-row "laser" requires a different approach to solving the problem:

• Find a small metal plate, scissors (for metal), pliers.
• Cut out a semblance of a key from a segment, make waves with pliers.
• Insert all the way;
• Turn.

The first method is also suitable for solving problems with a pump lock - it is often used to protect a garage or driveway.

There are more elementary locks, but no less problematic when opened.

Lock with a tongue: you can use a plastic card like in a movie, but most likely the door will not open, and the card will break. It is better to use a metal plate, a screwdriver, a flat rod - the main thing is that the device crawls into the opening between the door frame and the canvas. If it works, you need to press down the tongue and push the door.

The lock with a latch can be opened in this way: remove the handle (you need to find a tool to unscrew the bolts), dismantle the plate that hides the core of the lock. Then feel for the latch, push and turn the door handle mount.

How to open a door lock without a key: front doors

If a broken lock in the interior doors is, as they say, half the trouble, then the lock of the front door that does not open is already a real disaster! Everyone tries to solve this problem on their own, and the first thing that comes to mind is to enter the apartment through the window. It’s good when it’s a private house or the first floor of an apartment building - but what if you live on the second floor and above? "Mountaineering" without training and skills is a very risky undertaking. First you need to make sure that there are no other options. Or is it just that the whole arsenal of methods has been tried, and nothing helps to solve the question of how to open an iron door without a key?

1. The simplest situation is when the key is broken in the keyhole. In no case do we rush and do not try to pull out the chip with our hands. The most important thing is not to shove it deep. Instead, we knock on the doors of a neighbor (one, then another, and, if necessary, a third) and ask for rent pliers, wire cutters, an old-style jigsaw file. In general, with all this, we first try to grab onto the broken edge of the key and carefully pull it out, and if it doesn’t help, then we try to gently pick up the chip with a jigsaw file and pull it out of the keyhole a little. In general, we direct all our efforts to remove the chip - this must be done very carefully so as not to damage the secret.

How to open a lock without a key with a paper clip

The question of how to open the door of a house without a key is much more difficult to solve and to a greater extent it all depends on the type of lock - if a high-quality locking mechanism has a lot of degrees of protection, then you can not even think about opening the lock yourself. There is only one outcome - without special skills, you will not only not open the lock, but you will probably ruin it. In general, in such a situation it is better to turn to professionals. If we talk about simpler, as they say, mundane designs of castles, then among the one hundred percent methods, two options can be distinguished. Firstly, this is the drilling of a secret, after which it can be opened with any flat object. And, secondly, the elementary knocking out of the lock cylinder - just take it and hit the cylinder with a hammer with force. We beat so that the internal rotary cracker breaks - in most locks you don’t even have to put a lot of effort into this. The cracker breaks along with the screw holding the lock cylinder - after that, you just have to remove the cylinder and open the lock with a knitting needle or strong wire bent into the letter “L”. In general, the castle cannot be restored, but you will get into an apartment or a house, and this is already good.
How to open a lock without a key with a paperclip or hairpin. By and large, the operation is dubious, especially if we talk about a person who has never dealt with opening locks before - you can spend an eternity on this business and achieve nothing for one simple reason. Your type of lock cannot be opened at all in this way - not every locking mechanism can be opened with a paper clip or hair clip. And yes, it takes skill.
Alternatively, you can get a universal master key, but in this case, in order to solve the question of how to open a mortise lock without a key, you will need a certain amount of skill. In general, this is a delicate matter and has a lot of nuances - you can’t do without special preparation, knowledge of locks and other so-called “little things”.

How to open an iron door without a key photo

In general, you need to look at the place - the circumstances themselves will tell you how to be and what to do. For example, in some cases, when the lock is closed for one turn, you can try to disengage it from the door frame using a crowbar or crowbar. You can also try to disassemble the lock - first remove the handle. thereby gaining access to the core. The doors can also be opened by cutting off the hinges - this option is possible if the hinges are not hidden, and there are no burglar-proof pins in the doors. Among other things, you can resort to extreme measures - simply put, put physical effort on the doors and knock them out. This number works great with wooden doors, but not with metal ones, and even more so with armored ones - it’s impossible to break them down without a press.

In conclusion, the topic of how to open the door without a key, let me remind you once again that it is better not to do such things on your own. There are organizations that provide professional assistance in this matter - you just need to call and wait for the arrival of a person who will do everything quickly, and most importantly, carefully, causing a minimum of damage to your doors.

Cylinder locks (English or pin)

It is customary to install a mortise cylinder lock on an iron door.Manufacturers began to equip the larva of such mechanisms with armor plates and heavy-duty pins, but if the lock in the door is old enough, you can drill it out, that is, open it with a drill. A small hole should be drilled directly above the keyhole. Next, you need to raise the stopper, with the help of a master key, penetrate into the larva and move the hook. The cylinder with pins will open if you make a hole directly in the cylinder, and then insert a master key inside and turn it.

You can also try to open the input cylinder lock with a roll, but be prepared for the fact that this method does not always work. The fact is that an important detail of the English lock - the shank, after the application of the roll often breaks, which prevents further breaking. In this situation, you will simply block the lock cylinder, but you will not open the door.

How to open a door without a key: open the lock of interior doors

Interior doors, or rather their locks and latches, can be said to be the simplest in terms of opening without a key - locks for interior interior doors are usually not complicated, and it will not be difficult for even an inexperienced bear cub to open them. The main thing is to know how to do it and what "levers" to press.

In most cases, manufacturers foresee the situation with interior doors locked to the latch from the inside - this is a security system that has shown itself well in situations with children. Playing with the lock, they quite often lock themselves with a latch and get into an unpleasant situation for themselves.

If you pay attention, then in the place where the latch should be, there is a small screw for a flat screwdriver - it is precisely its turn that unlocks the lock of the interior doors.
Another situation in which the question arises of how to open an interior door without a key is somewhat more complicated, but it is solved quite simply. And it occurs in most cases due to a breakdown of the locking mechanism.

Let's just say the doorknob doesn't do its job and doesn't move the latch as it should. This issue is solved with the opening of the doors as follows - in the place where the latch is located, you need to drive a strong plate between the canvas and the box. Pushing it into the slot, move the tongue of the lock and open the doors.

How to open an interior door without a key photo

Alternatively, you can try to dismantle the interior lock handle and open the doors by acting directly on the rotary part of the lock. This option can work in the case when the breakdown is associated with a square that transmits the movement of the handle to the lock.

Naturally, all these manipulations must be performed carefully so as not to damage either the door frame or the canvas - if you squeeze something out with a crowbar, then you need to put something under it. In most cases, interior doors and their lining are not very durable and they are easily injured by metal objects, which are usually used to solve the question of how to open an interior lock without a key? Naturally, all these methods are by no means suitable for opening the lock of the entrance keyless doors - this is generally a separate topic, and you can see about it in this.