3 Ways to Shine Surfaces at Home with Lemon

How lemon juice works on scale

Chlorine, pesticides, calcium, aluminum, magnesium salts - all these and other undesirable elements are found in tap water in various quantities. Filtration, although it saves, does not remove all impurities, so scale will form in the kettle over time. When boiling, the salts are attracted to the walls and the heating element. Part immediately enters the body when pouring drinks, part settles in the kettle, accumulating and causing damage not only to the device, but also to a person.

Harmful plaque is not so easy to remove. Banal friction with a sponge with a hard, abrasive surface will be ineffective. The use of chemicals will be unsafe. The ideal option is to use natural ingredients, such as lemon.

Effective cleaning of the kettle from scale with lemon is achieved thanks to the acid, which breaks down the elements that have settled on the walls, converting them into easily soluble and washable salts. After simple manipulations, which may include heating the solution or resting the kettle with the composition inside, all that remains is to wipe the surfaces with a soft cloth to finally remove the residue.

If acid crystals, which are often used to remove scale, are not safe for electric kettles, then lemon juice is absolutely harmless. Seems to be the same formulations with the same mode of action.But the lemon juice secreted by a fresh lemon is more effective, but with a lower concentration of acids. Lemon peel also helps in cleaning, which is actively connected to ongoing descaling processes. The acid that is in it is not inferior in efficiency to juice. Therefore, if the pulp of a lemon was used when drinking drinks, and the peel remained, feel free to use it for cleansing.

lemon soda

The method of cleaning with soda requires caution, because this chemical compound has abrasive properties and can damage the surface of the microwave. You will need:

You will need:

• baking soda - 1 teaspoon;
• lemon - 2 pieces;
• water - 150 ml;
• heat resistant plate or bowl.

The combination of citric acid and soda is widely used in medicine and the food industry, which means that it is not dangerous to clean the microwave with it.

Rules for getting rid of pollution:

1. Pour water into a container and pour a teaspoon of baking soda into it.
2. Add crushed lemon or a tablespoon of citric acid from a bag.
3. Place the container in the microwave, turning it on at full power.
4. After 5-6 minutes, turn off the oven, but leave the lemon soda liquid inside for another 12-15 minutes.
5. Evaporation will settle on the walls and corrode the greasy coating, after which it will be easy to remove it with a soft cloth.

You should not put more than a teaspoon of soda, because when heated, it can foam up a lot and fill the microwave.

In order not to scratch the surface of the microwave, it is better to wipe it with the soft side of the sponge.

How and how to clean copper from oxide at home: the most effective ways

How to clean copper? The relevance of this issue is explained by the fact that products made of this metal have been used by mankind for many centuries. For a long time, the value of this metal was so high that it was equated to gold. The development of technologies has led to the fact that it was possible to significantly reduce the cost of copper production. This made it possible to make not only jewelry, but also dishes and interior items from this metal. The high popularity of this metal and alloys based on it is explained not only by its decorative effect, but also by its unique characteristics - high ductility, thermal conductivity, corrosion resistance, etc. Nobody wants to use oxidized copper utensils

Microwave cleaning at home

How to wash the microwave oven from grease and other contaminants inside at home? This cleaning method is based on the principle of creating a steam bath and a trap for the evaporation of cleaning agents. The effect of the trap will be created by the microwave oven itself. It remains only to make effective cleaning solution fromalways kept in the kitchen cabinet.

What will be required:

• Water (200-250 ml).
• Water tank.
• Half a lemon or two bags of dry mix.

Recipe:

1. Fill the container with water, pour citric acid into it or squeeze the juice from half a lemon, and then put the fruit itself there.
2. Next, put the dishes in the microwave and turn it on at maximum power for 5-7 minutes, depending on the degree of contamination. When the microwave turns off, it is worth waiting a few more minutes. This is necessary so that the vapors of citric acid corrode the remnants of fat and plaque on the walls of the stove.
3. The next step is to remove the dishes, wipe the oven inside with a slightly damp sponge or cloth. In difficult places, you can moisten the sponge in the same solution or with a regular cleaning agent.
4. Finally, dry the inside of the microwave.

This method has certain advantages and disadvantages:

• One of the cheapest cleaning methods.
• Citric acid is an almost perfect cleaner.
• Allows not only to eliminate fat and food residues, but also an unpleasant smell inside the microwave.
• If the inner chamber of the microwave oven is covered with enamel, citric acid should not be used often.

Thanks to the lemon, you can clean the remnants of burnt food, grease and small plaque. For stronger and older pollution, you will have to use other methods.

The video shows how to clean the microwave with citric acid:

Removing stubborn stains with citric acid and vinegar

If the contamination of the microwave oven could not be completely eliminated by the previous method, you can use white vinegar.

What will be required:

• Lemon juice from 1-2 citrus fruits.
• White vinegar (15 ml / 1 tablespoon).

Recipe:

Follow the previous method, but this time add vinegar to the lemon juice to dissolve any burnt food.

This method will increase the efficiency of using lemon in cleaning the microwave several times. To prevent the oven from smelling of vinegar, mix the solution thoroughly. If there are no traces of burnt food in the microwave, do not add vinegar to the lemon solution.

The video shows how to clean the microwave with vinegar and lemon:

How to wash with lemon essential oil?

An alternative to lemon is its essential oil.The product is diluted with hot water and applied to contaminated surfaces with a spray bottle. It acts instantly, so the camera is immediately wiped clean with a sponge.

For this method, you need to buy lemon or other citrus essential oil, which is sold at any pharmacy at a cheap price.

Among the advantages of the application should be noted:

1. Good breakdown of fat.
2. Surface disinfection.
3. Aromatization of the air.

The benefits of slices of this fruit and other citrus fruits

This method is based on the principle of softening food residues and oxidizing fat particles. This is due to the interaction of lemon peel with water vapor.

What is needed:

• One lemon or any other citrus.
• Container with water (400 ml).

Recipe:

Peel the lemon, put the peels in a container of water and place it in the microwave. Turn on the oven for 5 minutes at maximum power. As the lemon peel heats up, particles begin to be released, which, in the process of interacting with water vapor, soften dried-on food residues and oxidize particles of fat.

The principle of operation is the same as in the very first method. The only difference is that in this case, the oven should work smoothly for at least 20 minutes.

Important! Be sure to control the water level - some of the liquid should remain in the container.

The methods described above are useful if the dirt in the microwave needs to be removed as soon as possible, and at home there is nothing but a couple of lemons. Old pollution and strong plaque with lemon cannot be removed. However, these methods leave their well-deserved place in the piggy bank of any self-respecting hostess.

Folk methods

All recipes are very simple. They are based on the properties of natural substances that are in every kitchen.

Boiling

The recipe was invented by housewives in Soviet times. At that time, there were practically no household chemicals in stores. All used improvised means.

Inside

The cleaning solution is poured into a stainless steel container. Put it on the burner, heat the liquid to a boil, simmer for at least 2 hours. Leave to cool. The solution is drained. The pan is rinsed, wiped dry.

Outside

Take a large enameled basin or tank. Fill it with cleaning solution. They put it on the stove. Drop stainless steel items into it. The liquid should completely cover them. The dishes are boiled for at least 2 hours. Take out of the pan when the solution has cooled. All items are washed under running water, wiped.

How to prepare the composition

Take the required amount of water. The working solution is prepared based on the following proportions:

• water - 5 l;
• clerical glue - 100 ml;
• soda - 500 g.

Pastes from soot

In the kitchen there is always a tool with which you can wipe burnt milk, porridge.

Powdered activated carbon

The remains of burnt porridge are quickly removed with activated charcoal. The tablets are crushed. The powder is poured into the bottom of the pan. Pour water into it. After 15 minutes, the soot is easily rubbed off.

Ground coffee beans

Zealous housewives do not throw away filters with spent coffee. They use grounds instead of body scrub and metal pot cleaner. Apply it to the contaminated area, rub it with a sponge, leave for 10 minutes, washed off with water.

Liquids from white plaque and scale

Scale forms in the kettle, and a white coating forms on the walls of the pan. The cause of deposits is hard water.There are 3 remedies that can easily cope with this type of pollution.

Citric acid solution

Fill the kettle with water ⅔. Pour 20 g of citric acid. Boil. Let the water cool down and boil 1 more time. Removal of plaque begins after a few hours. Wipe off with a sponge or brush.

Coca Cola

The drink fills ⅔ of the volume of the pan. Bring it to a boil. Leave to cool. The plaque is wiped off after 30 minutes. Use a brush or sponge.

How to handle cutlery

Spoons, forks and knives lose their luster with time and contact with food. Return radiance with available means.

9% vinegar and lemon juice are equally effective. They are applied for cutlery flannel napkin. After 30 minutes, rinse, wipe dry.

Ammonia

The lost shine is returned with ammonia. It is added to water - 1 tsp. L / l. The stainless steel cutlery washed before this is lowered into the basin. After 5-10 minutes, spoons, forks, knives are rinsed, wiped dry with a kitchen towel.

Non-abrasive toothpaste or powder

Means remove the yellow film, polish the surface. A small amount of paste is applied to the surface, rubbed with a napkin. After rinsing, wipe and rub to a shine with a towel.

mustard powder

Mustard powder has cleansing properties. They make a paste out of it. Stirring constantly, pour in warm water. The mass is applied with a brush to the tarnished surface of the stainless steel.

Work with table vinegar with gloves. It quickly removes all types of contaminants. It is applied to a soft sponge and wiped over dull metal surfaces. Strong films of chronic fat do not lag behind well. To enhance the cleaning effect, lemon juice is added to the vinegar. After the procedure, the dishes are rinsed.

Lemon juice solution

Squeeze the juice from half a lemon. For 1 liter of water you need only 1 tbsp. l. Wet a sponge with the resulting solution and wipe the pan with it inside and out. Rinse it with water and dry it with a towel.

Steel polishing agent

You don't need to run to the store. An effective polishing agent is in the kitchen.

raw potatoes

To make the teapot shine like new, the potatoes are washed, cut into 2 halves. Rub them on a steel surface. In the same way, shine on the pans.

How to get rid of burnt jam

Burnt sugar is difficult to remove. The work is simplified by using table vinegar and laundry soap for cleaning. Water is poured into a saucepan. Pour in the soap shavings. Bring to a boil. Remove the pot from the burner. Pour in ½ tbsp. vinegar. When the water has cooled, rub off the pollution.

How to wash off rust

Small rusted areas are removed with baking soda. The surface is moistened with a sponge. She is also given powder. After 60 minutes, they try to scrub the rust with a brush. If the result is achieved, the surface is washed with clean water and wiped.

With regular care, stainless steel cookware will not tarnish. Serves for many yearswhile maintaining an attractive look and functionality.

How to properly clean a microwave oven with lemon?

After, how the microwave was used for heating food, traces of food or fat remain on its walls, and an extremely unpleasant odor appears. Therefore, when cleaning, it is necessary to use such tools that will help to cope with all the troubles in one fell swoop. Such a remedy is an ordinary lemon or a solution with it in the composition.

Lemon for cleaning household appliances

If the microwave inside has an enameled surface, then you should not use lemon too often, so as not to damage the material.

In order to quickly and properly clean household appliances, you need to prepare the following ingredients:

• A small container for water;
• 400-500 ml. water;
• 1 st. l. citric acid or 4 tbsp. l. lemon juice.

Solution components

Once all the components have been prepared, the following instructions must be carefully followed to help you quickly and effectively clean your microwave oven without damaging it. These include:

• Fill the container with water.
• Add lemon juice to water or dilute with citric acid. For maximum effect, you can put the fruits themselves in the container, from which the juice was squeezed.
• Put the finished container in the microwave.

Container with lemon juice

• Turn on the equipment for 2 to 5 minutes, depending on the nature of the contamination. In this case, the maximum power must be set on the display. Thanks to this, the steam will be able to concentrate as much as possible on the walls of the equipment, as well as its upper part.
• At the end of the working time, do not immediately open the door. It is best to wait another 5-15 minutes so that the dirt is completely behind the walls.
• Take out the dishes with citric acid or lemon juice, then wipe all the walls with an ordinary dishwashing sponge or a soft cloth.

Wall cleaning

If you correctly follow the entire sequence of actions, then the pollution will be washed off without additional diligence. In addition, the kitchen will smell fresh and clean with citrus notes.

Basic rules for the care of copper products

By following these simple guidelines, you will be able to keep your brass items looking beautiful:

1. If you use copper utensils, always keep them clean. Thoroughly clean and dry the product after each use.
2. When using copper utensils, it is not allowed to clean it with abrasive products, compounds based on chlorine, ammonia and other aggressive components. Also, do not clean copper utensils with hard brushes and scrapers. These products can damage the metal surface.
3. For the same reason, you should refrain from using metal spoons and spatulas, giving preference to devices made of wood, plastic or silicone.
4. If you wear copper jewelry, try wiping it down with a damp cloth after each wear. In this way, you will remove sebum and dust from the metal surface and you can avoid serious contamination. Remember to dry your items with a soft cloth such as velvet or flannel.
5. It is recommended to store copper jewelry in separate boxes, wrapping each of them with a piece of soft cloth. It is not allowed to get direct sunlight on decorations and their proximity to heating devices.
6. For better preservation, it is recommended to cover the products with a layer of special varnish for metal surfaces. Check coverage from time to time and update it. In this way, you are guaranteed to protect your favorite product from plaque and stains that are difficult to remove, and help the jewelry look great.

Copper jewelry always attracts attention with its unusual appearance and original brilliance. If you are going to wear copper products often, we recommend varnishing them.If you follow these simple tips, you can significantly extend the life of copper items.

If you follow these simple tips, you can significantly extend the life of copper items.

How to descale a kettle with lemon

Lemon peeling seems to many to be a costly manipulation due to the cost of citrus fruits. But it's worth considering! The procedure will require not 1-2 fruits, the cost of which is low, but the benefits are maximum. Without harm to health, you clean the kettle, as a bonus, you get a pleasant aroma throughout the apartment.

Preparing for cleaning

To clean the kettle with lemon, you do not need to make lengthy and meticulous preparatory measures. It is enough to focus on two main components: water and lemon.

While the measured liter of water is being filtered, take care of the lemon. It is he who requires maximum attention.

Training:

1. Rinse the zest of 2 lemons thoroughly using a fruit cleanser.
2. Lay the citrus on a clean surface and roll a few times. This will contribute to the intensive and rapid release of juice.
3. Get a cutting board that has a rim to keep liquids from spilling out of the work area.
4. Cut the lemon into slices or circles. Given the fact that boiling will be carried out, the size of the pieces can be quite large.

All is ready. It remains to prepare a soft cloth or sponge.

Step-by-step instruction

When everything is ready, proceed to the direct cleaning of the kettle:

1. Pour the filtered water into the tank.
2. Send the sliced ​​​​lemon and lemon juice that stood out during cutting there.
3. Then proceed depending on what type of kettle is available: electric - turn on and wait for automatic shutdown; for stoves, tiles - put on fire and wait for it to boil, wait about a minute and turn it off.
4. Do not discard boiled solution. Leave in the tank to influence the scale. Splitting will occur throughout as long as the water and lemon are inside the kettle.
5. When the kettle, respectively, and the water, cools down, remove everything from the tank.
6. If traces of scale remain on the walls, take those lemon slices that have already been used and treat the surface.
7. Finishing the procedure, simply wipe the walls and bottom of the kettle with a soft cloth. Do not use abrasives, hard sponges - they will do more harm than good.
8. Do a final rinse.

Remember that carrying out timely preventive procedures will protect against the frequent formation of a thick layer of scale. With preventive descaling with lemon in the kettle, similar manipulations are performed, but with a lower concentration of acids. If you carry out the procedure every week, you can get by with a fourth of a citrus or about half a glass of preserved zest. For prevention, half a fruit or a glass of zest is used every two weeks. It is advisable to perform a complete cleansing once every 1-2 months or as needed.

Cleansing with citric acid

Cleaning a microwave oven with acid is as quick and easy as with lemon. It dissolves dirt well. To prepare a solution of half a liter 1 tablespoon of water is taken powder and placed in the microwave. It is necessary to ensure that the water in the dishes does not boil away.

Another way to cleanse.Also, an easy way to clean the oven is to cut a lemon in half and wipe the inside walls with one half. Give time for the fat to dissolve and after an hour, when the dirt comes off, wipe the dissolved fat with a damp sponge, after which you need to wipe everything dry. This procedure will remove all odors and add aroma. It is not worth using citric acid to wash cameras covered with enamel, as it can often damage the coating. A plastic cap will help prevent food splashing, and you will have to wash the device less often from dirt. You can buy such a cap at any hardware store.

In this way, you can wash the oven. This method will not only clean items, but also disinfect and eliminate odors.

Proper use of the resulting solution

To wash the dishes, rub them with a sponge, dipping them in the solution, until they squeak. After that, rinse the mixture thoroughly with plain water.

If the dirt is too ingrained, you can put the dishes in a container with a solution for a while and then process it with a sponge.

The kitchen set should be wiped with light movements using a sponge soaked in the solution. A thin layer of product should remain on it, which must be further wiped with a dry cloth or paper towel.

Contaminated linoleum is also easily cleaned thanks to a sponge with a solution. Wait five minutes and re-wipe the floor with a dry cloth.

On the walls in the same way, dirt is simply wiped off: wipe it with a sponge and then complete the procedure by wiping the surface with a napkin. You can do the same with switches.

If you can not get close to small openings in the right way, use old toothbrushby dipping it first in the solution.

In the bathroom, the tool can also come in handy. It perfectly washes plaque in shower cubicle or in a regular bath. In addition, the resulting solution can boil a pan, at the bottom of which there is a strong fumes.

For convenience, you can pour the resulting solution into a bottle and use a sprayer on it in the future - this way it will be easy to distribute the product over a large area.

How to clean copper products to a shine?

The choice of cleaning method depends on the degree of contamination and the type of product to be treated.

Purification of copper from white plaque

White spots on copper also form due to oxidative reactions. They usually appear on products made from alloys of copper and other metals. One of the presented methods will help from this kind of pollution: using ammonia, vinegar with salt or ketchup.

How to clean copper from black and green deposits?

Ammonia will cope with black and green plaque. You can also remove the toxic layer with a mixture of turpentine, oxalic acid and vodka. The ingredients are mixed in equal proportions and copper products are cleaned with a cloth.

Cleaning copper from rust

To renew rusty copper products, use aggressive acids such as hydrochloric acid. Apply acid to a piece of cloth and rub it over the copper. After treatment, rinse thoroughly, getting rid of the remnants of an aggressive substance.

How to clean copper from oxide?

To remove oxide in the form of a reddish coating, place the product in a 5% ammonia solution or ammonium carbonate. Hold until the plaque begins to move away.

How to clean a copper cezve inside and out?

The outer surface of the Turks can be cleaned by any of the methods presented above.

If you do not have experience in working with aggressive chemicals and acids, use affordable and safe methods.

On the inside of the Turks, it is recommended to use softer substances so as not to damage the coating. For example, soda or ketchup.

Mechanical cleaning of copper products

Over time, a layer of dirt sticks to jewelry and various objects with carved patterns, consisting of many details. You can get rid of it mechanically.

First, remove surface dirt by washing the jewelry with soapy water. Next, use a needle to clean small holes and crevices from dirt. Then go over the entire product with a toothbrush.

During mechanical cleaning, you can use salt or baking soda, so the effect will be achieved faster.

How to clean tinned copper?

In the process of tinning, a thin layer of tin is applied to the inside of copper utensils.

Tin is a soft metal and must be cleaned with care.

Do not use sharp objects or harsh abrasives.

To clean a tinned copper product, you need to rinse it with a product for dish washing. Severe dirt is removed pointwise with a soft brush or a fine iron washcloth, previously moistened with vegetable oil.

How to clean a copper samovar?

Copper samovar belongs to antiques

Therefore, it is especially important to preserve its appearance and extend the life of the vintage device.

To clean a copper samovar, salt, vinegar and flour are taken in equal proportions. The ingredients are mixed and applied with a sponge to the outside of the samovar.

After processing the entire surface, remove the remnants of the cleaning agent with a dry cotton cloth.To make the surface shine, rub it with lemon.

How can you clean a brass samovar?

Brass is an alloy of copper and zinc. Aggressive chemicals and abrasives can damage the surface of such a samovar.

Oxalic acid is used for safe cleaning. It must be diluted in 1 liter of water, applied to the surface of the samovar and left for 5 minutes to carry out the reaction.

After the solution is washed off and the surface is wiped with a sponge dipped in soda solution to neutralize the acid. Rinse the product and wipe dry.

Clean a copper basin at home

As a rule, a copper basin is used to make jam. Such dishes have good thermal conductivity, antiseptic properties, are safe for humans, and when cooking, jam practically does not stick to the walls.

If the jam is still burnt, the copper basin can be cleaned with vinegar dough. For this old method, you need to knead the dough by mixing flour and table vinegar. Next, the dough is thinly rolled out and placed on the contamination.

After the mixture dries, carefully remove it. The vinegar paste absorbs dirt, making the surface perfectly clean.

Cleaning methods

If contamination could not be avoided, we suggest that you familiarize yourself with effective cleaning methods.

Dishwashing liquid (to freshen up)

This method is the easiest and is suitable for cleaning minor dirt and refreshing the product. You will need:

• dishwashing liquid;
• pelvis;
• soft sponge.

Fill a basin with warm water and add a few drops of detergent to it. Sleep well. Place the product in the resulting soapy solution and leave for a while. Then take a sponge and remove the soaked dirt from the metal surface.At the end of the procedure, thoroughly rinse the item under running water and wipe dry.

Citric acid (for green plaque)

This method will help you cope with the greenish bloom. You will need:

• lemon acid;
• warm water (preferably distilled).

First, prepare a 10% solution of citric acid: mix 10 g of powder with 100 g of warm water. Place a copper object in the solution and watch it: you will see how the green will separate from the surface of the metal and color the liquid green. As soon as all plaque is dissolved, remove the product and rinse thoroughly under running water.

If you don’t have citric acid on hand, rub half a lemon on the surface of the metal and leave for a while. Then rinse the product.

You can remove cloudy deposits and refresh copper products using ordinary dishwashing detergent.

Vinegar + salt (for dark spots)

If dark oxide spots appear on copper products, we recommend the following method. Prepare these ingredients:

• table vinegar;
• table salt or sea salt.

Mix 1 cup of bite with 1-2 tbsp. l. salt. Without waiting for the complete dissolution of the salt, place copper objects in this mixture and rub the surface of the products with salt a little. You will see the result instantly - there will be no trace of oxidation. After cleaning, rinse items thoroughly and dry thoroughly.

Tomato paste / ketchup (from blackness)

This one looks unusual the way is really good has proven itself for cleaning copper products from blackness. You will need:

• tomato paste or ketchup;
• piece of cotton fabric.

Apply a generous amount of ketchup to the product and leave for 1 hour.After the passage of time, rub the copper object well with a piece of cloth and rinse with water. This method will help not only to effectively eliminate stains, but also restore the brightness of the color to the metal.

Ketchup will help with dark spots on the surface of products

Flour + salt + vinegar (for shine)

This method will help you not only wash off dirt, but also give the product a dazzling shine. You will need:

• Wheat flour;
• salt;
• table vinegar.

Mix the ingredients in equal proportions and rub the copper object with the resulting gruel. Leave for a while. Then rinse well under running water and dry thoroughly.

For polishing copper items, we recommend using sheets of black and white newspaper. Crumple a few pages and walk over the surface of the metal with the resulting lump. The product will shine like new!

Salt + Vinegar (from strong pollution)

For old, stubborn dirt that is difficult to remove, we have a special method in store. You will need:

• salt;
• table vinegar;
• stainless steel saucepan or bowl.

In a saucepan, mix half a glass of salt with a glass of vinegar and place a copper object in the resulting solution. Put the container on the fire and bring to a boil. Turn off the heat and leave to cool completely. Then take out the products and rinse thoroughly with water.

Store copper utensils in a clean, dry place and wipe periodically with a clean cloth

We hope that our advice will help you keep copper products in excellent condition to the delight of yourself and your household. At the end of the article, I would like to add that dishes in clean, shiny dishes are guaranteed to be tastier and more aromatic.