How to get rid of mold in the bathroom: effective methods

Causes

For the final and irrevocable disposal of the fungus, you first need to decide on the reasons for its appearance.More often it appears due to high humidity and lack of ventilation. Mushrooms love just such premises. In damp houses, apartments located on the ground floor, in a room where a humidifier was not used correctly, in the case of maintaining a tropical climate for special plants growing in large quantities in small rooms, this is where mold will feel comfortable.

Almost all modern building and finishing materials are affected by the fungus. It can be found in the bathroom, toilet, on the air conditioner. Even a washing machine, refrigerator, books, wallpaper, or just walls can be infested with mold. Getting rid of it is sometimes very difficult.

Of the signs of the appearance of mold in the house, the appearance of a specific smell, damp and pungent, should be noted. The next step will be the appearance of spots - gray, black or whitish.

If you do not eliminate the high humidity and do not ventilate the room in the future, all the measures you have taken will be useless, as the fungus will reappear.

In what directions should work be started:

• mechanical cleaning of walls, floors, ceilings from fungus;
• treatment of all surfaces with a tool that will destroy mold;
• getting rid of all things damaged by the fungus and as a result unsuitable for further use;
• equipment for constant good ventilation of the room, which does not allow stagnation of air masses;
• decrease in room humidity. Detection and elimination of all sources of high humidity.

Signs and causes of fungus formation

The appearance of a fungus on the walls is an extremely unpleasant phenomenon that can negate expensive repairs in an apartment.

Mold spores are toxic.Once in the human body, they can cause a number of diseases: allergies, bronchitis, migraine, tuberculosis and asthma. Elderly people and children are especially susceptible

The following signs indicate the appearance of a fungus in the house:

• the presence of gray, black, dark green dots and spots on the walls or ceiling;
• the appearance of a damp, unpleasant smell in the room;
• flaking of paint, wallpaper, shedding of plaster and darkening of tile joints.

Some may notice a deterioration in well-being - concentration decreases, headaches become more frequent, fatigue occurs quickly.

It is necessary to remove mold in a complex way. The final and irrevocable disposal of the fungus can be achieved by eliminating the causes of its appearance.

The main reasons for the formation of fungus: air humidity over 70%! and temperature conditions from 20 ° C. "Weeping" windows - the first alarm signal

However, humidity and temperature indicators are far from the only factors in the development of harmful microorganisms.

Significant reasons include:

1. No or insufficient ventilation. As a rule, the fungus begins to develop in the corners of the room - in a place where air stagnation forms. With sufficient “blowing”, turbulences are formed - the air blows out the spores, and excess moisture is discharged into the ventilation duct.
2. Poor foundation waterproofing. As a result of poor-quality construction, capillary suction of moisture from a damp foundation occurs - the walls in the house become damp.
3. Unsatisfactory condition of the water supply and sewer leaks. Periodic wetting of the floor, ceiling, walls and engineering channels creates a favorable environment for the development of the fungus.
4. Thin freezing walls.Due to poor thermal insulation, the dew point shifts, condensate settles on the walls from inside the room.
5. Cold attic or leaky roof. This is a common cause of mold on upper floors and attics.
6. Improper use of a humidifier. When creating tropical conditions for exotic plants, mold fungus sometimes settles in greenhouses.

Most finishing and building materials can be affected by fungus. Dark spots appear on wallpaper, tiles, wood trim and plaster.

Image gallery

Photo from

The most favorable conditions for the appearance and settlement of the fungus are bathrooms, showers and toilets, i.e. rooms with high humidity

Mold always accompanies building code violations. If the plastic plinth is laid without a ventilation gap, a fungus will definitely breed under it

With incredible speed, mold fungus spreads in the seams between the elements of the tiled cladding. Therefore, for arranging bathrooms, it is recommended to use tile adhesive with an antiseptic.

The fungus on the window slopes is often caused by non-compliance with the installation technique: insufficient waterproofing of the slopes or a leaky installation seam. Improper wall insulation also provokes the appearance of mold.

If the room is not equipped with ventilation that provides standard air exchange, mold can appear even under paper wallpaper.

Mold almost always appears under a “non-breathing” finish that does not allow air to pass through, especially if the application technology is violated.

Mold is capable of infecting almost all building materials from which load-bearing structures are constructed. It destroys concrete, brick, wood

In order to prevent destruction and prevent the appearance of mold, tools are used to get rid of the fungus and carry out prevention.

Mold fungus in the bathroom

Mold under the plastic baseboard

Spread of mold in the seams of tile cladding

Fungal colonies on window slopes

Mold on concrete under paper wallpaper

Fungal colonies under vinyl wallpaper

blue mold on wood

Means of combating the destructive phenomenon

In addition, the mold fungus is able to settle in household appliances, most often washing machines, dishwashers and microwaves suffer from its appearance.

Prevention methods

If the cause of the development of fungi is not eliminated, the situation after treatment may repeat. To protect wood from infection, the following actions are taken:

in case of dampness in basements and attics, check the condition of the foundation and roof, improve waterproofing;
fungi do not tolerate sunlight, it is important to ensure the penetration of UV rays;
improve air circulation in the room, if necessary, use fans;
the room in which mold forms is dried, air heaters can be used;
avoid temperature fluctuations.

To prevent the development of mold, a wooden house must be heated in winter

It is important to monitor the condition of the basement and cellar, since these rooms are most susceptible to infection. In apartment buildings, mold can spread in bathrooms, wood paneling

Re-treatment of wood is recommended every 3-5 years mold repellents and fungus. Even with effective antiseptic formulations, it is easier to prevent the development of the fungus than to completely eliminate it.

When building a wooden house, it is important to immediately saw through the openings for air circulation and prevent dampness.

Types of black mold

Aspergillus is a large genus of microorganisms that has several species. Each of them can be attributed to black mold, but the places of their appearance and the degree of impact on humans will be different.

1. White mycelium with black spores. Found in toilets, affects food. It is toxic, contributes to colds, allergic reactions and even cancer.
2. Aspergillus fuming. Present on damaged vegetables, fruits, grains. Spores enter the body, where they infect red blood cells and greatly reduce immunity.
3. Ulokladium. Lives in mattresses, sheets, toilets. It can provoke candidiasis, vaginitis, kidney and liver diseases. The insidiousness of the fungus in "invisibility" - tests often do not show its presence in the body.
4. Cladosporium ("kerosene mushroom"). It affects a wide range of objects: food, window frames, earth (house plants), household appliances (refrigerator), face and hand care products, clothes, house walls, fuel and lubricants. Contributes to the development of severe allergies at any age, skin lesions (eczema, dermatitis).
5. Black mycelium with white spores ("black rot"). He likes wooden or plastered surfaces, but practically does not occur in residential buildings.
6. Penicillium. Appears mainly in products: grains, cereals, dried apricots, prunes, coffee. Fungus spores are dangerous for children - they sharply suppress the immune system due to the harmful substance ochratoxin.
7. Chetomius. It can appear and begin to multiply on any surface. It is dangerous if it gets inside a person (with food): it causes poisoning, with a severe course of which there is a possibility of death.
8. Alternaria.It has not only black, but also a gray tint. Occurs on spoiled fruits, vegetables and cereals, rotten leaves, meat. From contact with a strain of these fungi, a person can expect itching, a runny nose, dermatitis, and severe asthma.
9. Wallemia sebi is a fungus that does not like moisture, on the contrary, it prefers dryness and warmth. It is difficult to withdraw, but it does not pose a danger to humans.

Ways to deal with fungus on the walls

In the question of how to get rid of the fungus on the walls of an apartment, house or bath, the material of the structure and the method of fighting mold are important. Methods are folk and specialized. The first ones include:

-White. Kills any fungus. The problem is the restriction of use. Bleach will seep into porous surfaces, stagnate inside the walls. The harm of fumes and damage is comparable to a fungus. Therefore, only tiles, plumbing, some furniture and glass are treated with whiteness. One part of bleach is diluted in 10 parts of water.

Whiteness, as a remedy for fungus, is best used in the bathroom

-Vinegar. This fungus fighter is applied with a spray bottle. Better to use white vinegar. Deciding how to get rid of the fungus on walls of a bathtub or other room, you need to leave the reagent for an hour. Then, the vinegar is removed with water and the walls are dried.

-Ammonia. You need a 50/50 solution with water. Sprayed on the walls. After, the mold is erased. It remains to walk with a dry cloth.

-Bura. 200 milliliters are taken for 2.5 liters of water. The walls are cleaned of mold first. Borax is the final stage of processing, for example, separation and throwing away of wallpaper, plaster.

Whatever the method of removing mold, the maximum cleaning of the walls is recommendation number 1.The array of fungus is just an appearance. Spores of microorganisms can also be contained in visually clean areas.

The survivability of the “children” of the fungus is 5-6 months in beach sand and about a year on the walls. Poor cleaning provokes the appearance of new foci. The decision to get rid of them with specialized formulations leads to:

- "Anti-mould"

-Nano Fix

-"Metas-"BIO"

-NEOMID Bio

-SHIMMEL-ENTFERNER and other antiseptics.

There are universal mixtures, and there are specializing only in removing mold from wood, or concrete. Both materials are affected with equal success. An additional risk is the abundance of other organics such as indoor flowers in the house.

In their environment, in parallel with the question of how to get rid of the fungus on concrete walls or wood, the problem of treating plants will have to be solved. Spores penetrate the flowerpots, affecting the roots of the representatives of the flora. Root rot literally cuts them down.

It is easier to deal with the fungus on the walls with preventive measures. Less time and money will be spent. The main thing is to remember the existence of misfortune even at the stage of building a house, or repairing it.

Folk recipes

How to remove mold in the bathroom on your own? In the first aid kit or in the kitchen, there are probably substances that can effectively fight the fungus. Many of them are well known to us.

Using them for cleaning, you can not only achieve perfect cleanliness in the room, but also defeat the fungus for a long time.

Baking soda is a safe home remedy!

The instruction is as follows:

1. To prepare the solution, take 1 tsp. soda for 1 tbsp. water.
2. The resulting product wipes places with stains.
3. Rinse off is not required.

This method is absolutely safe for people and animals. The solution does not have a strong odor.

Vinegar

You can apply this product with a damp washcloth or with a spray bottle. After an hour, the surface is washed with water, and the room is well ventilated.

To remove mold with vinegar, you will have to do several weekly treatments. Work better with gloves.

The disadvantage of this method of removing the fungus is the strong smell of vinegar.

Hydrogen peroxide

This tool has a whitening effect, so it is only suitable for light surfaces:

1. Before processing the wall must be cleaned of visible fungus.
2. Peroxide is applied with a sponge to the prepared surface.
3. The tool can not be washed off.

ammonium chloride

This method is great for removing black spots from tiles, mirrors, shower walls and other smooth surfaces:

1. Apply ammonia in a diluted form.
2. It is mixed with water in a ratio of 1:1.
3. The solution is sprayed with a spray gun, left on fungus-infected surfaces for 60 minutes and washed off with water.

The disadvantage of this method is the pungent smell of ammonia, which can cause headaches.

Bura

It is one of the safest and most effective antifungal drugs.

To clean walls:

1. A glass of borax is diluted in 2.5 liters of water.
2. With a brush, the solution is applied to all infected surfaces in the bathroom.
3. It is not necessary to rinse off. It will serve as a good protection against further reproduction of mold.

Tea tree oil, lavender, grapefruit seed, rosemary

Each of these oils is a natural antiseptic:

1. Tea tree oil. To achieve the desired effect, a teaspoon of tea tree oil is diluted in a glass of water. The agent is sprayed on all surfaces and is not washed off.
2. Lavender oil is mixed with water in a different proportion. For 1 glass of water, you only need 10 drops of lavender oil.Apply and do not rinse.
3. Other oils. A working solution is prepared from rosemary oil or grapefruit seed oil according to the recipe above and applied to the affected areas.

This method is not suitable for people who are allergic to these essential oils.

Potassium permanganate

Potassium permanganate will easily cope with the fungus on the walls. A solution of a teaspoon of potassium permanganate and 1 liter of water will have a dark pink color, so it will not work on all surfaces.

The advantages of this tool include:

• no pungent odor;
• ease of use.

The solution does not need to be washed off the surfaces.

Lemon acid

The recipe is simple:

1. Add a teaspoon of citric acid or freshly squeezed lemon juice to a glass of water.
2. Apply to all surfaces with fungus and next to it.
3. The agent is not washed off.

The acid will keep the fungus from spreading. This tool will perfectly clean the tile and give it a shine.

A mixture of water, peroxide, vinegar and boric acid

Each component of this tool will easily cope with mold, and together they will give an unsurpassed result when processing all types of surfaces.

To obtain a working solution, take:

• 4 tablespoons of water;
• 2 tablespoons of peroxide;
• 2 tablespoons of vinegar;
• 1 tablespoon of boric acid.

The mixture is sprayed onto a mold-infected surface.

We remove mold in the bathroom with a mixture of vinegar, peroxide, boric acid and water:

Vinegar Soda

If you rub the surface with soda, and then spray with vinegar, it will help remove the mold and lighten the stains from it:

1. First, vigorously rub soda on the infected areas.
2. Then spray with vinegar.
3. Wash off with water after 40 minutes.
4. We repeat in 1-2 days.

Prevention

How to prevent the appearance of fungus? Everything is logical, you need to eliminate the causes of its occurrence. We have made the following recommendations:

Wipe off condensation thoroughly. It is advisable, after carrying out water procedures, to wipe with a dry cloth not only the inside of the shower, but also the outer glass. For prevention, you can also treat the corners with antiseptics.

Provide good ventilation. In bathrooms that are equipped with showers, it is desirable to have a ventilation system with forced air circulation. To put it simply - in the vent. channel must be installed fan.

If you buy a cabin with a Turkish bath, an external ventilation system will not be enough. Be sure to see that it is equipped with a built-in hood. This will reduce the humidity.

Watch for water where it accumulates. Clean up puddles promptly. Expose shower tray level so that liquid does not collect on one side. To do this, you can twist the legs of the frame or put metal washers under some of them.

We carry out prevention

Agree, it is always easier and cheaper not to fix the problem, but to prevent it. Therefore, it is necessary to periodically prevent the appearance of black mold in the house. These measures include:

• regular ventilation;
• checking the correct operation of ventilation;
• checking the premises for the presence of fistulas, leaks, cracks and their elimination;
• processing of all available building materials with special antiseptic agents (before repair);
• elimination of holes and cracks in the frames, if any;
• bathroom ventilation.

Fans in the bathroom

Black mold is a dangerous enemy of a person, carrying great harm to health. It is possible and necessary to deal with it, but it is best not to start the problem, and start solving it at a very early stage. Then victory will definitely be on your side.

What is required to combat fungal infection?

Before starting work, you should take care of everything you need, in particular, about your safety (many of the tools listed below are extremely aggressive).

In the fight against fungal infection, you will definitely need:

• spray;
• rubber gloves;
• eye protection goggles;
• respirator (required during the use of products containing chlorine);
• capacity;
• brush or small brush;
• putty knife;
• actually, means from a mold mycelium.

Tools and materials for fighting mold in the bathroom

After preparing everything you need, you can get down to business.

Basic methods and ways to remove the fungus

Mold has long lived next to a person, therefore, over the centuries of such coexistence, mankind has developed quite effective methods of combating the fungus with folk remedies. Well, with the development of science, purely chemical methods for the destruction of the fungus appeared.

Chemical methods

Chemical methods are called treatment with antiseptics, such as Sava, Vel Dan or Dale. There are a lot of names, so you should consult with sellers. An antiseptic is selected depending on the type of mold and the type of material being processed. As a rule, one company specializes in one material: wood, plastic, metal, tiles, etc.

Chemical methods are good speed. They penetrate into the deep pores of materials and destroy the body of the mycelium without scraping.But such methods are much more expensive than folk remedies, so they are used less often. In addition, most of these products are toxic and at the time of treatment, it is better to leave the apartment for a couple of days.

Antiseptic for mold in the bathroom

When handling, you need to be extremely careful, use a respirator, rubber gloves and goggles.

Folk ways

Folk methods use vinegar, bleach, boric acid and copper sulfate.

Based on the above, the most effective solution was invented long ago, which includes: 2 parts of vinegar, 2 parts of citric acid and 1 part of boric acid. This mixture is diluted with water in a ratio of 1: 2 and the surfaces in the bathroom are treated with it using a spray gun.

Another common option is the use of bleach. It is diluted with water in a ratio of 1:10 and applied to the walls in the same way. After 10-12 hours after application, the dead part of the mold is removed, the procedure is repeated 8-10 times.

In addition to the methods already mentioned, vinegar, furacilin tablets, hydrogen peroxide are used - any destructive substances are used.

The main rule: processing should be done at least 3 times with breaks of about a day. Solutions are applied to porous materials with a metal brush, which brings the solution to a sufficient depth and mechanically destroys the mold.

Practical tips: how to get rid of fungus in the bathroom

The fight against mold in the bathroom has every chance of success. Initially, you should tune in to the thoroughness of the actions performed. Superficial measures will bring only short-term success.

Special funds

The industry of household chemicals offers a lot of drugs with which you can get rid of mold in the bathroom.However, having received a visible result, do not flatter yourself: you will not be able to put an end to the fungus once and for all. We will have to systematically repeat actions aimed at removing new formations and at prevention.

Mellerud anti-mold agent

Time-tested quality. The manufacturer offers a whole line of products of this brand. Read the instructions on the package, the composition and guarantees of effectiveness against certain types of mold.

Mechanical action with hard brushes will enhance the cleaning result with the product.

Spray on any affected areas. Act intensely and quickly. Rinse the treated areas immediately with cold water, wipe dry and dry.

Israeli-made spray Mildew Remover

It is recommended to use on surfaces made of synthetic materials - shelves, partitions, plastic screens, rigid nylon curtains. The spray is also effective in relation to ceramics.

Russian remedy Veksa with whitening effect

The preparation contains active chlorine, is an alkaline concentrate. It successfully removes plaque and mold from almost any surface in the bathroom: plastic, wood, durable paint, ceramics, natural and artificial stone. Read the instructions for dilution of the composition - the concentration for dilution is different. Depending on the material, type and extent of mold growth.

Popular Spray Cillit Bang

Designed for daily use to remove salt deposits and mold. Against mold that has accumulated in hard-to-reach seams between tiles, the product is ineffective. Use it to treat the shower, sink, bathtub, floor. Be prepared for a strong smell - use a simple medical mask.The substance foams, then the foam should be removed and the treated areas should be washed with water.

Folk ways

They can be used both individually and in combination with each other, or periodically alternating one with the other.

To this day, folk remedies that were used by our grandmothers and great-grandmothers are still in use. These substances are available at any pharmacy, are sold at minimal prices and give a relatively stable result.

Aqueous solution of borax

The substance is diluted with water at the rate of 5 liters to 2 glasses of powder. These proportions are conditionally standard. For advanced stages of the fungus, increase the amount of borax (for example, if you moved into an old apartment with poor sanitation).

The mixture is applied with a coarse brush to the surface, intensively rubbed. After two minutes, using a softer brush, the soaked mold must be removed. The remains of the solution do not need to be washed off, they will serve well for suppressing pathogenic fungal spores.

blue vitriol

It is necessary to dilute the crystalline substance as prescribed in the attached instructions. The substance is sold in hardware stores, sometimes in pharmacies. Use rubber gloves and a respirator.

Vitriol belongs to the category of toxic substances and requires precautions when working with it.

Areas with mold are thickly smeared with a brush moistened with a vitriol solution. Do this at the stage of repair, before finishing work. Try to treat the surface 2-3 times. Leave to evaporate (you do not need to rinse off the antifungal mixture).

Hydrogen peroxide

It does not have as high an effect as we would like. Nevertheless, the tool is popular with small growths of mold, in the initial stages of its appearance without penetration deep into.

Working with peroxide does not require special precautions. Use a 3% ready-made solution from a pharmacy

Handle tiles, corners and plumbing. Rub in and let dry, no need to rinse with water.

Soda

It is sometimes mixed with salt or laundry detergent, and is also used in its pure form. The effect of mold removal is not durable, but with small lesions it is quite noticeable.

The dry matter is mixed with water until a homogeneous slurry. Then the mixture is applied to the affected areas with a foam sponge. Intensively massage the area, rinse it with clean water.

Acetic essence

Bred in proportions from 0.5 to 1 bottle per bucket with a volume of 10-12 liters. Acid corrodes already formed fungi, and also penetrates into microcracks and successfully works there too. When handling acid, take care of the mucous membrane of the eyes, work in goggles. Rubber gloves also come in handy to avoid burns on the skin of the hands.

Mold Prevention

As with any problem, mold is much easier to prevent than it is to deal with in the future. To prevent mold, a number of rules and conditions must be observed.

A certain level of humidity in the room. An unfavorable environment for the development of mold is humidity not higher than 30%, so it should be maintained at this level. A good solution is to install "warm floors", but if this is not possible, it is enough to buy a good heated towel rail. In addition, it is not recommended to dry wet clothes in the bathroom, as evaporating moisture is the best way to promote the appearance of harmful microorganisms.

Quality ventilation.Constant air circulation is a prerequisite for maintaining a “healthy” bathroom. If natural ventilation does not work well, you should take care of forced ventilation, and also leave the door to the room open after hygiene procedures. Plastic windows prevent normal air circulation - in such rooms it is necessary to carefully monitor the appearance of mold: arrange surfaces daily, wipe dry all accessible surfaces.

Correct plumbing. All pipes and taps in the bathroom must be fully functional, not leak or drip, otherwise it will be impossible to achieve a normal level of humidity. The best option is plastic pipes, as they do not retain condensate.

Proper bathroom fittings. When carrying out a major overhaul or entering a new apartment, you need to take care of the prevention of fungus in advance - treat the walls with special means, and only after that finish the walls with tiles, glue wallpaper or plaster. Joints where water constantly flows should be treated with a sealant. When installing furniture, it is imperative to leave free space between interior items and walls in order to ensure normal air circulation. If one of the walls is in contact with cold air (for example, it goes outside or into a stairwell), it should be additionally insulated.

Regular cleaning. About once a month, you need to carry out general cleaning in the room, move furniture and plumbing away, treat hard-to-reach places with any antiseptics, you can even use soda or vinegar

Particular attention should be paid to those places where water can stagnate - a cup for toothbrushes, a soap dish, etc.If your bath mats or shower curtains are affected by fungus, they should be thrown away and replaced.

Air ionization

A good way to get rid of mold and prevent its occurrence is air ionization. It is done using a special device called an ionizer. It is quite expensive, but very effectively fights not only fungus spores, but also other harmful microorganisms.

Preventative agents against mold. Cheaper mold prevention products can be found at any home, pharmacy, or home improvement store. These are anthracene oil, camphor balls and iodine. Anthracene oil needs to be treated with surfaces where mold can appear (the disadvantage is that the smell is too strong), camphor balls are laid out around the room in different places, and iodine is diluted in water (10 mg per glass of water) and left in a small container on the bathroom shelf.

The main thing about the problem

Scientists have found that mold appeared about 200 million years ago. The fungus managed to survive the drought and the ice age. Traces of mold are found even in areas with increased background radiation, where other organisms cannot survive.

Causes of mold

There are several reasons why mold can grow in a bathroom. The main ones are:

1. High humidity level. The bathroom contains water pipes, a sink, a bathtub, a washing machine and other items related to moisture. Therefore, there is constantly increased humidity. Such an environment creates favorable conditions for the reproduction and formation of fungal organisms.

2. The predominance of artificial lighting. Most modern bathrooms do not have windows, so the light in them is artificial.Experts have long proven that natural light suppresses the viability of the fungus, so its absence provokes the growth of mold.

3. Heat. Hot water is constantly used in this room. In addition, a dryer can be installed in it. Elevated air temperature is the optimal condition for fungal life forms.
4. Cracks, cracks, chips. In the bathroom, you can find many gaps inside which moisture accumulates. In most cases, moldy marks appear under the bathtub, PVC panels, in tile joints or behind the clothes washer.
5. Air congestion. Lack of window openings and inadequate ventilation are additional factors contributing to the development of mold.

Signs of a fungus

You can recognize mold by the following signs, depending on its type:

• gray and black: dark spots on the surface, in the early stages the mold has no color, so it is difficult to notice;
• white: whitish coating, having a velvety and fibrous structure;
• green and blue: traces have a heterogeneous structure;
• red or pink: fluffy surface, light matte (soapy) coating.

Locations of mold spots

Moldy spots can occur in different areas. Depending on the variety, mold can be localized in such places:

• gray and black: rooms with high humidity;
• white: nutritious foods, moist coatings, soil in pots for indoor flowers;
• green and blue: natural finishing materials (including wood), plant soil, food, brick;
• red or pink: decay products, some types of houseplants.

What damage can mold cause?

Mold can cause significant damage to the finish, destroying the materials. In addition, its spores can have an adverse effect on the human body. Fungus can cause the following problems:

• rashes on the skin;
• cough;
• feeling of lethargy and weakness;
• chronic rhinitis;
• baldness;
• eczema;
• bronchial asthma;
• severe intoxication;
• rheumatic pains;
• deterioration of the digestive system;
• chronic headache;
• conjunctivitis;
• hemorrhages of internal organs.

Intensive measures

It must be said right away that the destruction of mold in the bathroom is not an easy task. It is especially difficult to eliminate it from large areas. In this case, the most radical method of struggle is a major overhaul. The tiles will need to be removed. You also need to remove all the paint from the walls. Do not forget about the whitewash on the ceiling. Getting rid of mold in the bathroom begins with drying all surfaces. This is done after the preliminary work is completed. Drying is carried out using a building hair dryer. During the period when mold is being removed in the bathroom, it is highly undesirable to wash indoors. This is due to the fact that the air must remain dry.