Review of infrared heaters Ballu

Information about the company

Industrial concern Ballu specializes in the development of climate technology. Many years of experience and a large number of research centers provide the company with an advantage over competitors.

The company offers products manufactured using the most advanced technologies. The manufacturer assures that such models are of high quality and reliable. This is a well-known manufacturer in the heating equipment market. He cooperates with several dozen European companies and brands, and is also well known in Russia.

In this video you will learn the pros and cons of an infrared heater:

Possible malfunctions

One of the faults may be the lack of heat.

The reasons:

• lack of voltage in the network or in the device itself;
• poor switch operation;
• break in the power supply circuits of the heating element.

You can solve the problem yourself.

• Check the quality of the network and cables. Replace cable if necessary.
• Check switch operation. If necessary, replace a broken switch.
• Eliminate the open and restore the operation of the heating element.

Repair and connection of equipment must be carried out by a qualified specialist. Incorrect connection may cause the device to malfunction. And it is also possible electric shock or ignition of the electronics inside the device.

If the display of the temperature controller does not light up in numbers, then only a qualified specialist should deal with this repair.

In the event of a breakdown, you need to contact specialized workshops that specialize in a particular type of equipment. Due to many technologies, such devices cannot be repaired in a simple workshop.

Terms of use

When it comes to maintenance, Ballu equipment practically does not need it. Thanks to its manufacturability, protection features and mobility, you can use the heaters without risk. They need to be supported only under the condition of external influences. If the device is dirty, it must be cleaned. If the mechanism malfunctions, it is necessary to check the contacts, as the power supply may be interrupted due to cable failure.

When using oil heaters for the first time, an unpleasant smell of smoke may appear. This is a normal occurrence. The first start time should be about 20-30 minutes in a well ventilated area.

Radiant panels must be wiped with a cloth soaked in alcohol. Other liquids will not work. The rag should not scratch the body of the heater.

To avoid a burnt smell during subsequent work, you need to keep the body of the device clean. Dust under the influence of temperature can be the source of this unpleasant smell.

The use of devices must be observed according to safety regulations. A professional should set up and initially turn on the device.

The best heaters for the street, garage and warehouse

For heating warehouses, garages, boxes and other rooms with constantly open doors, it is better to choose gas equipment. Such devices are designed to work in outdoor conditions and are more economical than the types of heaters described above.

Ballu BOGH-15

An interesting design gas heater has dimensions of 0.6 × 0.6 × 2.41 m. It is designed for heating 20 sq.m. There are wheels for being able to move. It has an infrared heating element, runs on propane and butane, and is equipped with electric ignition. Gas consumption: 0.97 kg/h. Maximum power 13 kW. Operated mechanically. There are protective functions: gas control, shutdown when capsizing. The kit comes with a gas hose and reducer. Price: 23 thousand rubles.

Advantages:

• original appearance;
• heat is felt within a radius of 5 m;
• the gas cylinder is hidden inside the case;
• easy start;
• adjustable flame height
• not dangerous;
• creates comfort in the country, on the terrace, not only warms, but also shines;
• no smoke and soot.

Flaws:

• high price;
• sharp edges of the frame (gloves must be worn when assembling and changing the cylinder);
• high gas consumption.

Ballu BIGH-55

Mechanically controlled gas oven 420x360x720 mm. Runs on propane and butane. Piezo ignition provided. Consumption: 0.3 kg/h. Power 1.55-4.2 kW. Designed for heating 60 sq.m. Equipped with wheels. There is infrared heating.Protective functions: control of carbon dioxide, in the absence of a flame - the gas supply is turned off, when capsizing - it turns off. Includes hose and reducer. Price: 5850 rubles.

Advantages:

• simple device;
• compactness;
• easy to operate;
• fire safety;
• powerful enough;
• heats up very strongly.

Flaws:

• to turn off, you need to twist the balloon;
• the balloon can damage the internal elements;
• difficult first start, you need to follow the instructions.

Ballu BIGH-4

Gas heater 338x278x372 mm, has a heating element in the form of a tile. Infrared heating provided. Runs on propane and butane. Consumption: 0.32 kg/h. Power 3-4.5 kW. Mechanical control. It is completed with a cylinder, a hose and a reducer. Price: 2800 rubles.

Advantages:

• low cost;
• compact;
• comfortable leg, does not tip over;
• heat-resistant body;
• safe;
• gas supply is regulated;

Flaws:

care must be taken during transportation, ceramics can break;
no automatic ignition.

Ballu BHDP-20

Diesel gun of small dimensions (28x40x68 cm) with a handle for moving. It has a direct type of heating. Runs on diesel (consumption 1.6 kg/h). The tank is designed for 12 liters. There is a built-in filter. Mechanical control, there is an indicator of the off button. The temperature can be adjusted. Air exchange 590 cubic meters / hour. Power - up to 20 kW. Works from 220 V, consumes 200 W. Burner included. There is a fuel level indicator, overheating protection, built-in thermostat. Price: 14.3 thousand rubles.

Advantages:

• compact, easy to transport;
• powerful;
• unpretentious to the quality of fuel;
• economical consumption;
• can work for a long time;
• housing coating is protected against corrosion;
• big tank;
• overheat protection;
• everything you need for work is included;
• safe.

Flaws:

• the room needs good ventilation;
• non-volatile (mandatory binding to power);
• no wheels;
• the smell of burning.

Model range of IR heaters brand Ballu

Ballu produces infrared heaters designed for heating residential and industrial premises. Radiators work on electricity and gas.

Electric infrared heaters

Presented in several series: Bali, BIH, Red Evolution, INFRARED NEW, etc. Each modification has its own distinctive characteristics:

• Bali - modification of Bali is installed on a wall, ceiling or a special telescopic stand. Used for domestic purposes. Maximum performance is 3 kW. Household ceiling electric infrared heater Ballu, Bali series, is optimally used for local heating of a part of a room, open areas and unheated premises: arbors, country houses, garages. The wall mount of the Ballu infrared heater allows you to change the inclination of the panel from 20 to 40 °.

BIH - flat ceiling electric heaters Ballu infrared type, for industrial premises or domestic needs. The BIH model features a housing protected from moisture and dust ingress, which has compact dimensions. The main purpose is industrial use. It is allowed to connect to a remote thermostat and combine several panels into a single heating system.

The model range of floor infrared heaters Ballu is represented by several series, among which stand out favorably: INFRARED NEW and Red Evolution (new in 2015). Floor models have legs with wheels for easy movement of the emitter inside the room. To increase heat dissipation, the Red Evolution additionally uses a silent blower.

Gas infrared heaters

Gas-fired equipment is highly efficient, safe and economical. Models have a wide scope, can be installed in residential and industrial premises.

The range includes emitters of the following series:

• UNIVERSAL are Ballu long-wave infrared gas heaters, popular with hikers, hunters and fishermen. The kit comes with jets and adapters that help connect the UNIVERSAL unit to both main and bottled gas. The possibility of local heating, cooking, etc. is provided.

GALAXY - the principle of combined heating is used. The ceramic radiant panel heats the surface of nearby objects, and the fan heater evenly distributes the heated air in the room.

BOGH - outdoor infrared gas ceramic heater Ballu is one of the most innovative inventions of the company. Used for heating outdoor areas. The design of BOGH provides for a gas afterburner made in the form of a glass meter flask, which contributes to an increase in thermal power. Industrial outdoor gas infrared heaters of the Ballu brand are best used for outdoor areas.During combustion, a column of light is visible in the glass bulb of the afterburner, as a result, the BOGH heater can be simultaneously used as a lighting device. The main design feature is the unique thermostat for the Ballu BOGH infrared electric heater, which allows you to adjust the temperature manually and automatically.

The experience of using IR heaters has shown the feasibility and safety of using both electric and gas models. When selecting a suitable radiator, it is necessary to take into account the technical and operational characteristics of the heated building.

A line of halogen heaters from Ballu

Ballu halogen heaters are represented by only one Halogen series. A halogen lamp is used as a heating element. The case has a small weight of only 1.1 kg. The model is equipped with a mechanical thermostat and is designed for local heating of small rooms from 5 to 15 m².

In industrial applications, the Ballu halogen heater is used for drying painted surfaces, wood, etc.

Despite the large amount of negative information that has appeared, it has not been proven that there is any harm from Ballu infrared halogen heaters.

Features of Ballu infrared heaters

Balu heating devices are modern heating equipment used to heat private households, country houses, industrial premises of any size, agricultural buildings, offices, administrative buildings and even open areas. Thanks to their technical characteristics and principle of operation, they provide fast and economical heating.

Such devices themselves do not give off heat, they heat the surrounding objects, the heat from which diverges throughout the room.

Infrared radiation does not heat the air, but heats the surrounding objects. They begin to radiate warmth, creating a very comfortable atmosphere. At the same time, convection drafts do not form in the premises. If we compare them with the same convectors, it is necessary to clarify that infrared heaters are able to heat rooms with high ceilings - convection devices lose their effectiveness in high rooms, halls, production workshops and other buildings.

What are noteworthy heaters "Ballu"? First of all, they are characterized by a wide scope of application - models for domestic and industrial use are produced at the choice of consumers. This allows you to create comfortable warmth in any conditions. Other benefits and features:

• compact dimensions - almost all Ballu infrared heaters are characterized by minimal dimensions and do not clutter up the space;
• high efficiency - they warm up well even unprepared rooms, characterized by large heat losses;
• the possibility of heating open areas - relevant for home gardens and summer cafes;
• ease of installation - the low weight of the device affects;
• the presence of gas models is an excellent choice for heating buildings and territories where there is no electrification.

Ballu heating appliances are convenient and unpretentious, they can work in any conditions and are distinguished by excellent technical characteristics - in particular, convenient operation, low energy consumption and high efficiency can be distinguished.

The undoubted advantage is the well-thought-out design of the cases - due to this, it became possible to increase the efficiency without increasing the power of the equipment.

Kinds

Heaters are of several types.

infrared

They differ in that they do not heat the air itself, but the objects that are in the heated room, using infrared radiation. Consider their pros and cons. Let's start with the positives.

• They have advantages over convector heaters in terms of heating rooms with a high ceiling. If the convector type loses its effectiveness and makes the temperature in the room uneven, then the infrared type is able to heat a room with a high ceiling without problems.
• Light weight, which facilitates installation of the device.
• High efficiency. Infrared models will be able to warm even those rooms in which there are heat losses.
• Fast warm-up speed.

Flaws:

• high price;
• low radius of work;
• a certain time spent by a person nearby due to infrared rays.

Infrared heaters can be either electric or gas.

1. Electric. There is a floor and ceiling view of the units. This adds versatility to use.
2. Gas. More mobile than an electric heater. It can work on long waves, use the combined heating function. An innovation is the outdoor type of heaters. They can warm open space.

The entire line of infrared technology of this type has the function of thermoregulation. That is, you can set the desired temperature. You can do this both manually and automatically.

Oily

They have a base in the form of a metal case, inside of which there is oil - the main heating element in the entire structure. The oil heater works with the help of a heating element. It is he who heats this container of oil. When the oil temperature rises, it is transferred to the metal case, which warms the room.

There are quite a few benefits.

• High mobility. Such equipment can be easily transferred from one room to another.
• Safety. The maximum temperature to which the oil warms up is 60 ° C, so even if the oil gets on the skin, this will not lead to serious consequences.
• Low noise level. This is useful for those who do not like to be distracted by extraneous things.
• Acceptable price.
• Absence of extraneous smells and preservation of humidity in the room.

Of the shortcomings, weak power is noted. The warm-up time even for medium-sized rooms is more than half an hour.

Convector

The principle of operation of convector heaters is the exchange of hot and cold air masses. Thanks to continuous convection, the device at the outlet will be able to give the temperature that you set for it using a thermostat.

Advantages:

• regulates the work itself, when the set temperature is reached, it turns off, and when it needs to be increased again, it automatically turns on;
• high efficiency;
• low energy consumption;
• high performance;
• providing heat to a large space;
• even distribution of heat.

The disadvantage is the low efficiency of heating rooms with high ceilings. Due to the fact that cold and warm air masses circulate from above and below the room, the high ceiling traps hot air.

The lineup

It is quite diverse, but we will consider the main models of each type.

infrared

Ballu BIH-L - differs from its electrical counterparts in that the lamp is taken as the basis for the work. It is she who creates infrared radiation. This model is great for closed, semi-open spaces, gazebos, terraces. The presence of tripods will help you set up the machine the way you want.

Ballu BIH-AP-2.0 - a feature of this electric heater is that all the heat is evenly distributed throughout the room. Easy installation, high efficiency (for models of this series, it can be above 90%). The appearance of the fluorescent lamp makes the models of this series invisible.

Ballu BIGH-55 is a gas heater that combines in its design not only infrared, but also convection type of operation. This unit can be used both in semi-open areas and in large crowds of people, because the safety and efficiency of this device is 25% higher than that of its counterparts. Food should be provided through a gas cylinder.

Oily

The Classic series is the main line of oil heaters produced by Ballu. There are two types of colors: Snow White (snow white) and Black (black). Their characteristics are completely identical, the difference is only in color.

They have from 5 to 11 sections, perfectly heat rooms ranging from 15 to 27 square meters. The Easy Moving complex provides high mobility. You will be able to move equipment without any problems. The high-precision Opti-Heat thermostat will allow you to maintain the temperature at the level you set.

The transport kit includes a 1.6 meter long cord, chassis and a special handle. High Stability technology increases the stability of the device so that it cannot fall on its side.The Protective Coating feature contains an anti-corrosion compound that will protect the device from environmental influences.

Convector

Represented by several models.

• Evolution Transformer - has as many as 40 configurations. Thanks to this variety, you can choose a package for yourself. This is done by selecting options and accessories.
• It has three types of power supplies: mechanical, electronic and with Digital Inverter technology. According to the type of fastening, this ruler can be both wall-mounted and floor-mounted, which adds variety.
• Plaza EXT - have a very durable front panel, which consists of durable heat-resistant glass-ceramic. Double G-Force system, air outlet louvers, anti-freeze mode, temperature control with an ultra-precise electronic thermostat, high moisture protection class - all these functions can be provided by this product line.
• Camino Eco is an economical type of heater that is very comfortable to use. And the Homogeneous flow system, the Double G-Force heating element and high mobility will help ensure this comfort. Quiet operation, balanced air convection and advanced equipment make this model very ergonomic.
• Enzo is a series equipped with a new generation monolithic heater. Double G-Force X-shape technology distributes heat evenly. The built-in ionizer purifies the air, and moisture protection prevents water from entering the heater system. Also included is a bracket and chassis so that you can position the equipment where it is most convenient.
• Ettore - have a special design. In addition, there is a complete list of modern technologies. Among them, moisture protection, rollover protection, the presence of a chassis for transportation.Unique among all the lines is the Auto Restart technology, which restarts the machine after an unplanned power outage. This feature is perfect for those who live in areas with an unstable power grid.
• Heat Max - have increased power and speed when warming up. Able to heat a large area without problems with heat retention. Due to the Homogeneous flow technology, the air flow is distributed throughout the room, providing uniform heating
• Red Evolution - have an aerodynamic body that looks both modern and practical. This series has two types of heating: convector and infrared. This allows you to emit radiant energy and at the same time smoothly distribute cold and hot air masses throughout the territory.
• Solo - contain an overheating protection system, rollover protection.

All types of electric convectors Ballu

Domestic Ballu convector heaters are produced in seven basic configurations. Some models work exclusively on the principle of air convection, others, combined type, also have a built-in infrared panel.

• Evolution is a Ballu platinum series convector heater. A characteristic feature of the device is thoughtful design and external device. Models of the Evolution series have a capacity of 1 to 2 kW, equipped with a mechanical or electronic thermostat.

Plaza - Ballu electric heating convectors are made in black. The models are equipped with a convector LED control panel. The Plaza series is designed for people with refined taste, for installation in offices, offices, living rooms and shops. Productivity 1, 1.5, 2 kW.

CAMINO ECO is a good budget model at an affordable price. Convectors with a monolithic heating element have a working life of 25 years. CAMINO ECO heaters are easy to control, with a mechanical temperature controller and an overheat protection sensor. Starting is done with the push of a button. The set includes feet for floor installation.

ENZO - models with built-in air ionizer. Ideal for heating an apartment, office, private house. If desired, you can connect an electronic thermostat, or leave a mechanical control unit. ENZO has a "parental control" function, as well as an innovative Homogeneous flow system that provides even distribution of heated air in the room, a splash-proof housing.

RED Evolution is a combined model using the method of infrared and convection heating. An aluminum plate heating element is installed. Electric convectors Ballu RED Evolution have a degree of protection IP 24, which allows the use of heaters for wet rooms.

Infrared is another combination model with good thermal performance. The Infrared series is equipped with a mechanical thermostat with two-stage power switching and the ability to automatically restart the system in the event of an emergency power outage.

Camino is a convection-type Ballu electric heater device, Camino series, provides maximum heat transfer and high speed of heating the premises. The design includes an electronic or mechanical thermostat, a new generation Double-U-Force heating element, a monolithic type (has double heating power).If necessary, you can choose a model with a built-in ionizer, various security sensors. Electricity consumption during the operation of the Camino convector is reduced by almost half, due to the absence of heat loss and stepped power switching.

If you need to choose climate equipment for constant space heating, it is better to purchase wall-mounted electric Ballu convectors with electronic thermostat. Thanks to the intelligent control program, electricity savings reach 15-20%, compared with analogues using a mechanical control unit.

Installation Recommendations

Heaters require accuracy in installation, like any other technique.

thermostat

The wiring diagram consists of a heating element, a terminal block, and a circuit breaker. If the connection is collective, then an electromagnetic starter or other contactors are also used.

To find the right place for mounting, do not try to place the device close to other heat sources. No need to mount near windows or doors. This may degrade the performance of the heater and lead to heat loss. Installation should be carried out at a level of 1.5 m.

The purpose of a thermostat is to maintain a certain temperature in a room. Several devices can be connected to it, so that regulation can take place on large objects, where several infrared heaters are needed for heating. To connect them to one controller, you must use a switching device. They can be a contactor, a force field or a magnetic starter.

Flask

It is found in a series of outdoor gas heaters. As a rule, the models contain not one heat-resistant glass bulb, but two.They are safe and have been approved by the Russian Academy of Sciences. This suggests that these flasks are of high quality. The flasks enhance the thermal power and at the same time can serve as lamps, because during their operation a column of light is visible.

The main device is connected via a 3-wire cable that comes out of the device case. After the wires are closed, they heat the heating element and begin to produce heat. It produces infrared radiation that heats nearby objects. Due to this, the room is heated.

Installation must be carried out according to the instructions. Drilling holes, selecting fasteners and other installation steps are carried out in accordance with the conditions of the room and safety regulations.