What can be done from an old ironing board

How to tighten the ironing board cover

The easiest way is to tighten the cover on the top of the board with a rope inserted into the hem. The width of the hem must be at least 2 cm, otherwise the cord may “slow down”. The hem can be done in a variety of ways, such as overcasting the edge of the cover and tucking it in one layer, or making a double hem, just like for a window curtain.Instead of a cord, you can insert a linen elastic, then you will not need to loosen the cord when removing the cover in order to wash it.
An elastic band can also be stitched along the edge of the cover. Just buy a hard elastic band, because the elastic band will weaken from the puncture of the needle and will not stretch the cover well on the countertop. It is best to adjust the elastic with a wide zigzag stitch with almost the maximum stitch length.

Sewing a new cover

We draw a line to make a so-called channel for an elastic band or thread.

We install the ironing board so that the gasket is on top, and install the new cover on top too. We fold the edges by about 0.5 centimeters and press well with an iron.

The channel does not have to be perfect, just do everything by eye.

Now again fold the edges by about 0.7 centimeters.

Roman-era pavement discovered after sinkhole in Rome

On the advice of a neighbor, I drink milk with turmeric every evening: I sleep like a baby

Black cumin oil will protect people and animals from ticks while walking

This can be a little tricky if you've never done this before because the corners are not even. Try approaching the corners from different angles if you can't get them right the first time. Just make sure you don't fold the material too much or it will make it difficult for the string or elastic to get through the case.

This work I did a little carelessly, but I tried.

Take two pins and place them a few centimeters apart in the center of the back of the lid.

We use an allowance of 0.2 centimeters. Starting from one edge, we sew everything in a circle.

When it comes to creases, your sewing machine can catch on them. In this case, stop the machine with the needle down and raise the presser foot.Slide the pleated fabric back under the foot and continue sewing.

Move to the other marked edge of the hull. Don't forget to reverse stitch at the beginning and at the end.

The easiest way to replace your ironing board cover

It is not necessary to sew a cover for an ironing board. A board with a wooden top can simply be pulled over, securing the fabric with furniture clips. But first, you need to remove the old cover along with the insulation pad, because when wet, it will quickly contaminate the new cover, especially if it is made of white fabric.

If you leave the old gasket, and even more so if you do not remove the worn fabric upholstery of the board, then it is advisable to use colored fabric for sewing or upholstery of the cover. A cotton fabric, such as coarse calico, is ideal for a cover, but mixed light fabrics can also be used. The main thing is that they do not shed and do not spoil light things during ironing. By the way, when ironing light products, experienced tailors throw a clean white cloth on top of the board.

Rating of the top 5 best built-in ironing boards

There are 5 main models of boards that are in demand among buyers. All these devices are compact and have good performance characteristics. The choice of one of them depends on the needs of the person and his financial capabilities.

1: Belsi Verona

A board built into a mirror is considered the most correct solution. It can be installed in any room and easily hidden from prying eyes. The most interesting model of such a device is Belsi Verona. In a passive state, it is difficult to distinguish it from an ordinary mirror.However, it is worth doing a few manipulations, and the owner of the premises will have the opportunity to iron various wardrobe items.

Main advantages:

• a large selection of colors;
• the presence of decorative moldings;
• ability to withstand up to 20 kg;
• compactness;
• beautiful appearance.

In addition to the pros, Belsi Verona has several disadvantages. Among the most important are the lack of an iron stand and the complexity of installation.

2: Asko HI 1152W

Built-in ironing board saves space

This is especially important for a small room, where every square centimeter counts. One of the most interesting representatives of this class of boards is Asko HI 1152 W

It is produced by a popular Swedish company that produces various home appliances.

The main pride of this model is the built-in ironing board mechanism. It is highly reliable and durable. Owners of the Asko HI 1152 W can use a variety of optional accessories to make ironing easier and more enjoyable.

Advantages of the considered model:

• ease of installation;
• clear installation instructions;
• compact dimensions (length 93 cm, width - 31 cm);
• durability;
• the possibility of changing the length of the working surface;
• long warranty (24 months).

3: Astra Mini Eco

This is the best Russian ironing board. It is of good quality and reasonable price. The design meets all safety requirements and has a special lock that prevents accidental disassembly. Astra Mini Eco is quickly disassembled and installed in any room.

The base of the product is made of wood. Its width is 38 cm and its length is 128 cm.When folded, the device fits into a cabinet 8 cm wide.

Advantages of this model:

• compactness;
• safety;
• the presence of a reliable latch that prevents the board from falling out of the cabinet;
• relatively low cost;
• a large selection of colors;
• sustainability.

Astra Mini Eco has only one drawback - a lot of weight. It may vary depending on the configuration. from 13 to 15 kg.

4: Janov Temise Eco

This wall-mounted ironing board is versatile. It can be hidden not only in a special niche, but also in a closet. The case is finished with white oak, which allows you to fit the product into almost any interior.

The board is made of chipboard and covered with cotton fabric. It has dimensions of 114×35 cm and is easily hidden in a closet or a niche 8.5 cm wide. By purchasing Janov Temise Eco, the buyer receives several additional accessories. The most important of these is the non-stick case.

Product advantages:

• ease of installation;
• withstands up to 60 kg of weight;
• it is possible to install a mirror;
• small sizes;
• stylish design.

5: Hafele Ironfix

This product is attached to the wall or hides in a special niche. Even in the working position, it does not take up much space. Therefore, Hafele Ironfix is ​​often chosen by owners of small living spaces.

The main advantages of the model:

• the presence of a cover made of cotton;
• beautiful appearance;
• small sizes;
• fast unfolding;
• the possibility of choosing colors;
• ease of installation;
• compactness.

The disadvantage is the inability to independently adjust the height.

Fiberboard and chipboard boards

This nondescript material is perfect for decorating with various fabrics. Taking as a basis an ordinary board, fabric and foam rubber, you can make a wonderful bench in the hallway.

• patchwork - a board covered with bright patches looks great in a calm classic interior as an element of decor or complements the country style;
• decoupage is a great solution, you can use napkins, wallpaper or stickers;
• constriction - if there is no desire to create something original, the board can simply be covered with the material you like and complement the interior with an original table.

And most importantly - do not immediately throw out a boring or spoiled thing. After all, it can become an exclusive piece of furniture in your home. All you need is a lot of desire, a few tools and a drop of magic.

Cabinet - the optimal solution

If you're still undecided as to where exactly your housework equipment will be placed, the best option for "parking" all your materials and tools is a specially equipped closet. It has several benefits.

Advantages
Compactness. The closet can become really compact, and if you figure out where to put it, the final solution will please you with the opportunity to save free space.
Convenience. You do not need will run throughout the apartment in anticipation of cleaning, and look for the necessary devices, because they will all be stored in one place
Versatility. You can put in such a piece of cabinet furniture not only an ironing board and a vacuum cleaner, but also mops, shovels, hatchets, household chemicals
Availability. A good wardrobe can be bought at competitive prices if you know how to choose it correctly. And these aspects will be covered in detail later in this material.
Hygiene. When all things are in their places, the house becomes clean and comfortable.Therefore, it is not surprising that by finding a “home” for every household item, you can comply with hygiene standards.
Safety. This rule is especially true if there are children in the house. They can create traumatic situations by accidentally finding a vacuum cleaner or ironing board.

These are not all the advantages of special cabinets, in fact, their list is much longer.

How much fabric and batting is needed for the cover

To drag the table top of the ironing board, you need to buy 0.6 meters of cotton fabric and the same amount of insulation. It is desirable to use white (bleached) coarse calico for the cover, and light batting for the lining. The width of the fabric and batting must be at least 150 cm. 300 rubles are enough to purchase these materials.
Another thing is to buy a furniture stapler, the price of which is at least 400 rubles, but it will be needed quite rarely. However, a stapler can be useful not only for hauling an ironing board. If your home has upholstered furniture, the upholstery of which also needs to be “refreshed”, then these costs will be justified. Instead of
sewing chair covers is much more convenient and it will be easier to just drag them. The stapler will also be indispensable when replacing the upholstery of an office, computer chair. However, if you do not need to buy a stapler, you can get by with small postal carnations instead of paper clips. Just do not drive the nails completely into the board, but bend them.

Board storage in wall cabinets

Hanging cabinets are in great demand lately due to their compactness, capacity and functionality. Many of them have a larger compartment where the board should be placed.

You can fix the board in such cabinets in different ways, starting from the same hooks and elastic bands, and ending with loops.A board fixed on a loop does not even need to be taken out every time, just stick it out and you can start ironing clothes.

There are special hanging cabinets for ironing boards, which have one large compartment for the board itself. These cabinets come in a variety of shapes. For example, there are cabinets made in the form of a small door hanging on the wall.

Helpful Hints

In order not to figure out how to get out of this situation, it is worth treating the end of the wash a little differently. If the washed laundry is taken out immediately after turning off the machine, shaken well and hung correctly, there will be less wrinkling. During the drying process, it is worth periodically smoothing the clothes with your hands, straightening the folds and creases.

Approximately with the same effect, drying clothes is carried out with a towel or an absorbent piece of fabric. Immediately after washing, the wardrobe item is shaken, all the folds are straightened, laid out on a pre-layed towel. Roll up and press lightly. The absorbent pad needs to be changed periodically.

The best way out in this situation would be a steam generator that removes all the flaws on the clothes. It is used to straighten even strong creases. The product must be hung on a hanger, and the device must be heated to the required temperature. After that, they carry out a working surface on clothes.

It is possible to iron clothes without an ironing board, it is enough to be smart. It may not be possible to iron to an ideal state, but things will acquire a neater look.

Metal boards with a mesh base

They are the prime candidates for remodeling. Their service life is not as long as that of wooden ones, and there are many possibilities for use after service.

The mesh design is great for making organizers. Craftswomen will appreciate the opportunity to make a stand for threads, ribbons and other trifles out of it.

The mesh base can also be used as a jewelry organizer. By hanging it next to the mirror, you will not need to rummage through the boxes in search of what you need. Everything will be right before your eyes.

And by hanging a planter on the board, you can arrange a miniature garden on the wall. This is especially convenient in small rooms where there is not always enough space for flowers. You can use planters or other containers for various little things in the nursery or in the kitchen.

The relief grid can serve as a wall panel. It is enough to take polymer clay and beautiful floral motifs have already appeared. By turning on the imagination to the maximum, the board can be turned into anything.

How to hide an ironing board

On the wall
The place behind the door or on the wall is rarely used, but this does not prevent you from hanging a board there. This option will not only save space, but also allow you to hide the ironing board so that it does not interfere with you and your family moving around the apartment.

Perfect disguise
Match your ironing board upholstery to the color of curtains, walls, furniture or accessories to make it an integral part of your interior.

On clothes hooks
To fix the board to the wall, use metal coat hooks. They are usually used in hallways, they are more reliable and can withstand the load. Fix two such hooks on the wall - and feel free to hang an ironing board on them.

On the door
If in a fit of emotion you can clap door - this option is not for you. However, if your character is calm, fix the board on the door using the same hooks.So that it does not rattle with each opening and closing, firmly fix it. Ready!

In a drawer
If your board is small and there is a chest of drawers or a wardrobe in the apartment, you can hide it in one of the drawers.

For a small board
The small size of the ironing board not only helps to hide it securely, but also saves space in the room.

Built-in board
Today you can buy not only an ironing board, but also a cabinet in which it is already carefully installed by manufacturers.

If you are going to update furniture - pay attention to such models of furniture!. In kitchen set
Unusual solution - hide the board in the kitchen

A great option for a studio kitchen.

Vertical drawer
The board in the lockers can be located not only horizontally, but also vertically.

In kitchen set
An unusual solution is to hide the board in the kitchen. A great option for a studio kitchen.

Drawer in chest of drawers
If the ironing board is small, you can hide it in a small chest of drawers.

In a hanging cabinet
For an ironing board, you can make such a pretty wall cabinet. This will make the interior not only harmonious and attractive, but also more functional.

Another option
Do not forget that such a piece of furniture should look good in the interior. Therefore, before you start making a wall cabinet, consider its color scheme, dimensions and material from which it will be made.

Multifunctional option
In a single wall cabinet, you can store not only a board, but also various trifles: household chemicals, an iron, brushes for clothes or shoes.

Wooden door? Ironing board cabinet!
Such a wall cabinet made of natural wood will become a real highlight of the interior.

Two in one
This option helps to hide not only the ironing board, but also the outlet.

It turns out that everything ingenious is just

The only thing you should pay attention to when applying the tips is that the place to store the ironing board should be near the outlet and be out of the reach of children. If your friends are just about to do repairs - share our tips

The interior can be not only beautiful, but also practical!

Share on

published on
according to the materials

Materials and tools

In order to drag the ironing board, we need the following materials and tools:

• old ironing board;
• two meters of fabric of your choice (it is better to use cotton fabric);
• two pieces of batting;
• sewing machine;
• scissors;
• threads;
• pins;
• needles.

The following materials can be used for stuffing:

• blanket;
• Quilt blanket;
• batting;
• towel.

I prefer quilt because I have plenty of this material at home. You can easily use multiple layers to make a padded board.

Whatever fabric and padding you choose, just make sure you can use it in its entirety and not in pieces. If you need to sew multiple pieces of fabric or padding to form one piece, the seam lines will cause unevenness in the cover. This means that you will have to work hard to get even cuts.

How to drag the ironing board yourself

Doing household chores is always more pleasant in a cozy environment where comfort and accuracy reign.But the picture is often spoiled by an ironing board: due to its specificity, there are stains from glue applications, stains from scale, sometimes even scorch marks and holes on it. Using such a thing is not a pleasure, and the consequences of ironing on a contaminated surface are not excluded, and ironing on the table is inconvenient.

Of course, it will not be difficult for the old assistant to find a replacement - in the assortment of the catalog there will surely be an option to your liking. And if you don’t want to spend money on buying a new one or there’s no way? To solve the problem, it is enough to drag the ironing board with your own hands.

Hauling or buying a cover?

Sometimes housewives prefer to purchase a replacement cover, but the result can be disappointing. If the stationary working surface of the ironing board is heavily soiled, stains will soon appear on the new layer of fabric.

Self-constriction pleases with savings in strength and finances: it will be possible to cope with the task in just an hour, and the costs will not hit the family budget. During restoration work, it is possible to add a soft lining, and during ironing, prints from the edge of the board will not remain on the clothes.

Assessing the benefits, let's get down to business!

Step-by-step instruction

Prepare:

• piece of cotton fabric - 1.5 m by 40 cm;
• foam rubber or batting 80 cm wide.

We adhere to the following procedure:

- Turning the board over, take out the staples holding the fabric

A sharp and short knife is suitable for work, but you need to act very carefully

- We throw away the old foam rubber, and the upholstery material will come in handy. We put it on a new fabric and draw around the contour to make a blank.

- Add 3 cm (to the thickness of a more reliable seal) and cut out the part.The edges can not be processed, because in the future they will not be visible.

- Fold the foam rubber in half, cut out the layer. If thin batting is used, we fold it in several layers and sew along the perimeter.

- We put the lining on the fabric, place an inverted board on top.

- We bend the material inward and fix it with a bracket approximately in the middle of the board.

We continue to move around the perimeter. It can be difficult to fix the upholstery, you will need to make an effort or resort to male help. When the bracket does not enter completely, it is knocked out with a hammer.

- We process the corners: so that the material does not bulge, carefully cut off the excess fabric, not forgetting to leave room for a fold. We form neat bends, fix the upholstery.

In conclusion, it remains to tighten the loose screws, and, if desired, walk along the legs with fresh paint. It will not become a new thing, but presentability will be restored: we will get an ironing board that is pleasant to work on!

Nikolaeva Svetlana for the magazine "With Your Hands"

Rubric: Comfort with your own hands |
Tags: Helpful Tips

A few finishing touches

I thought that I would use the old cord from the previous case, but it turned out that it was not quite long and did not fit the new case. Then I decided to use a new lace. Its length was 35 centimeters.

We fasten the end of the lace to the pin. We insert it into the channel and begin to thread the cord, making accordions out of fabric. We reach the end and remove the lace from the pin.

My husband loves my pumpkin sandwiches: it’s not difficult for me - I bread and fry (recipe)

Ford Tudor - 1937 car with a trailer on one wheel, and only 2,000 miles

The guy fulfilled the dream of his mother, and bought her a house with honestly earned money

Hold the ends of the cord and straighten the cover so that it is flat.

I put the lining on the board. If you think it will move, you can sew it to the metal base using thread and a needle. I made it to the pointy end - it was easy to do because of the open grille.

Now we put on a new cover. We tie a rope.

I used special ironing board straps for safety so that the structure does not move. I found out about them only at the very end of the workflow and immediately bought them. They were quite cheap.

All is ready. Now you can use the ironing board. If you burn the cover again, you can easily replace it. After all, we already know how to do it.

Subsequence

Now that all the materials are prepared, you can proceed to the most important stage - the work itself.

First of all, you need to decide for yourself what the scale of the object will be. Typically, the figures range from 125 * 35 centimeters (length * width, respectively).
You should measure and transfer the measurements to the furniture board itself.
Prepare the bars, the dimensions of which are indicated in the above paragraph of the article.
Next, cut out the details.
Take a bar and measure 52 cm from one end, and 58 cm from the other side.
Drill a hole at the marked points.
With other lumber, it is enough to do similar fraud.
The longest of them should be sampled. You will need a trial drill for this. Thanks to this, nothing will interfere with ironing.
The remaining product must be connected, and the middle ones must be rotated 180 degrees.

Organize a small gap, the diameter of which will be 8 mm, having previously stepped back three cm from the border.
From the other edges, leave a distance equal to two cm and make a sample from one.
Using bolts, attach the long logs to the short ones.
From now on, your countertop support is ready. It remains only to fix them. To do this, leave a space from the border of the segment of about 18 centimeters.
If you cut a small indentation at the other end of the element, then there will be an opportunity to attach a leg

This is useful when unfolding the ironing board.

During production, it makes sense to pay attention to the upholstery of fittings. It's also easy to do

It is only advisable to take into account the parameters of the countertop. Next, mark the outline with a marker and cut along the marked traces.
Wrap the finished installation in a canvas and strengthen the structure with a stapler.

There are times when there is no time to mess with such inventions, and the presence of a floorboard is mandatory. This problem can be solved with a temporary solution. Doing is easy. And if you are also the owner of a wide stool, then you are lucky. It is only required to assemble a special case, which will be consist of three layers: blanket, aluminum foil, cotton fabric.

In addition, you can use a stapler for fixing. Whatever the outcome of events, you will get a compact and easy to use as a result. And thanks to the three-layer product, the surface of the chair itself will not be exposed to high temperatures, so safety is guaranteed.

A few finishing touches

I thought that I would use the old cord from the previous case, but it turned out that it was not quite long and did not fit the new case. Then I decided to use a new lace. Its length was 35 centimeters.

We fasten the end of the lace to the pin.We insert it into the channel and begin to thread the cord, making accordions out of fabric. We reach the end and remove the lace from the pin.

Having dropped a wedding ring somewhere, people feel as if they have lost themselves.

'The Matrix' Returns: Filming for Long-Awaited Sequel Starts in July

Two friends dressed up as buoys to swim, the fine was 135 euros

Hold the ends of the cord and straighten the cover so that it is flat.

I put the lining on the board. If you think it will move, you can sew it to the metal base using thread and a needle. I made it to the pointy end - it was easy to do because of the open grille.

Now we put on a new cover. We tie a rope.

I used special ironing board straps for safety so that the structure does not move. I found out about them only at the very end of the workflow and immediately bought them. They were quite cheap.

All is ready. Now you can use the ironing board. If you burn the cover again, you can easily replace it. After all, we already know how to do it.

Varieties of cabinets

To not have to every time after cleaning push the board under the bed, and take the vacuum cleaner to the balcony, you should think again about buying a special cabinet. Fortunately, the modern variety of such designs offers to make the right choice from a wide range.

According to this criterion, these products can be divided into the following varieties:

built-in products are inexpensive, they save space, but there is a nuance: they are suitable only for those whose space allows you to build in such a large niche;

free-standing special cabinets came to the market not so long ago, however, they are offered in a wide variety and help to save free space;

cabinet for household appliances as part of a large closet. In the absence of it, you can equip it yourself.

Depending on the material, these products are classified in the same way as ordinary cabinets. They can be made of wood, veneer, chipboard, plastic.

So we looked at the features of cabinets designed to store certain household items. A competent approach to their selection and use will allow you to get a rationally organized space and enjoy more free space.

Preparation of the old coating

If your ironing board had a cover, now is the time to rip it open and make a pattern out of it.

We remove the lace or elastic (you may need to cut it) and place the material on the ironing board. We use the iron to smooth out the old cover.

We put the cover on the floor and put the ironing board on top to see how big the allowances were. For best results, it is better to make allowances of 5-7 centimeters.

Switching to Cold Brew Coffee in Summer: Cold Brew Benefits and Recipes

HD Matrix LED headlights: Audi A7 with Tesla-Fighting Powertrain

A resident of Pskov sheltered wild animals at home and became famous on the Web

Types of built-in ironing boards

There are several types of built-in ironing boards. Which one to choose depends on the space you are willing to allocate for storing it and on personal preference. Let's consider them in more detail.

Folding

The classic version of the built-in ironing board.This model is no different from the regular model, except that its cover is attached to a frame with a hinged mechanism attached to the wall. The advantage of the model lies in the simplicity and reliability of the folding mechanism.

When folded, the product is in a vertical position along the wall, so its size is not limited by anything other than the surface for which it will be hidden. You can order a board with a large cover area.

Usually folding mechanisms are hidden in a closet. Rarely attached directly to the wall. But this option would only look appropriate in the dressing room. An ironing board attached to the wall in the living room will stick out of the interior. The solution can be implemented in any way and gives room for creativity: the design can be hidden in a closet, behind a picture, or even behind a mirror.

Embedded in a mirror

The original solution is built into the mirror. Manufacturers offer mirrors of various sizes. The mirror can be moved to the side, and can be made in the form of a swinging door. In the niche behind it is a folding ironing board. Sometimes this option is combined with a small cabinet in which an iron and other household items are stored.

Retractable

Retractable boards are placed in the drawers of cabinets and chests of drawers. The disadvantage of the model is that it is limited in size by the box in which it hides. This board folds in half. Its mechanism is more complex than that of folding ones, and more prone to breakage.

The retractable model is the most compact and takes up the smallest space of all types of built-in boards.

Nagar on the iron?

Learn how to clean the soleplate of the iron from carbon deposits and not ruin it?

Cabinets with ironing board

It can be a small wall-mounted cabinet with an ironing board and shelves for an iron and other little things, or a full-fledged linen closet. The most popular model is with a folding mechanism, hidden in a closet.

Sliding wardrobes are usually large and heavy, which provides good stability. They are made to order, allowing you to plan a place for the board in advance so that it does not interfere with access to other shelves.

Popular accommodation option cabinet with a board on the balcony. Just keep in mind that the balcony should be large, glazed and warm so that you can iron in the cold season.

Kitchens with ironing board

The location of the ironing board in the kitchen is a controversial point. In the kitchen, we usually have crumbs and food particles. If something is being prepared at this moment - steam and smells. And then you bring clean linen ...

Consider the size of the kitchen. The ironing surface is long and narrow, and Russian ruhns are often small. In working order, the design can block the kitchen and prevent family members from eating or drinking water.

But you should not immediately exclude this option. The board is usually located in the kitchen table drawer and takes up minimal storage space. It is suitable for studio apartments where space is limited, and the kitchen and living room are combined. Suitable for people living alone who do not have a large amount of ironing and have the opportunity to cook and iron at different times.

Examples of embedding ironing boards in various interior items you can see on video:

Choosing a storage method

In fact, finding a place to store an ironing board is easy. Almost any narrow and high niche will do. The catch is that it is not very convenient to carry it.Moreover, good models usually weigh a lot.

The first thing to start looking for a place to store is to analyze your own habits. That's what the designers say.

• If you prefer to iron your clothes with the TV on, ironing facilities should obviously be nearby.
• Another point: next to this place there must be an outlet, every time you get tired of fiddling with an extension cord.
• Ironing in the laundry room is convenient. But such a room is not provided in every apartment. As an alternative, you can consider a bathroom, if space permits, or an insulated loggia.
• Many manufacturers of kitchen sets offer options with a compartment for an ironing device. Consider this possibility when ordering furniture.
• You can also iron in the hallway. But if you are blocking the passage to the bathroom or toilet, consider this moment in time.

When you have determined the room, you can choose the method.

Sewing a new cover

We draw a line to make a so-called channel for an elastic band or thread.

We install the ironing board so that the gasket is on top, and install the new cover on top too. We fold the edges by about 0.5 centimeters and press well with an iron.

The channel does not have to be perfect, just do everything by eye.

Now again fold the edges by about 0.7 centimeters.

According to Myasnikov, rumors about the categorical dangers of meat are exaggerated

Cheerful mother posted a photo of a “real lockdown” with children on the Web

Rasputin in the trailer for the British intelligence film King's Man: The Beginning

This can be a little tricky if you've never done this before because the corners are not even. Try approaching the corners from different angles if you can't get them right the first time.Just make sure you don't fold the material too much or it will make it difficult for the string or elastic to get through the case.

This work I did a little carelessly, but I tried.

Take two pins and place them a few centimeters apart in the center of the back of the lid.

We use an allowance of 0.2 centimeters. Starting from one edge, we sew everything in a circle.

When it comes to creases, your sewing machine can catch on them. In this case, stop the machine with the needle down and raise the presser foot. Slide the pleated fabric back under the foot and continue sewing.

Move to the other marked edge of the hull. Don't forget to reverse stitch at the beginning and at the end.