Overview of electric boilers Galan

Overview of the best models of electric electrode boilers

Serial production of ion heating boilers by UAB Galan began in 1994.

Over the years, several modifications have been developed and put into production:

• hearth;
• Geyser;
• Volcano;
• Galax;
• Hearth-Turbo;
• Geyser-Turbo;
• Volcano Turbo.

Using innovative technologies, Galan is constantly improving its products.

Hearth - provide for a specific power consumption of 2 to 6 kW and are designed for heating rooms with a volume of 80 to 200 m3. These are single-phase boilers designed for a voltage of 220 V. Systems with a coolant volume of 20 to 70 liters are recommended for them. They have compact dimensions: length - 31.5 cm and weight - no more than 1.65 kg.

Geyser - specific power consumption - 9 and 15 kW, designed for space heating from 340 to 550 m3. These are three-phase boilers designed for a voltage of 380 V.For them, systems with a coolant volume of 50 to 200 liters are recommended. Dimensions: length - 36 and 41 cm and weight - no more than 5.3 kg.

Volcano - more powerful boilers, the power consumption of which is from 15 to 50 kW. These devices are powered by three-phase current and, heating from 150 to 500 liters of coolant, can heat rooms with a volume of 850 to 1650 m3. Their length ranges from 46 to 57 cm. These boilers are available in a modular design.

The following three-phase apparatus Galax is produced in a housing version: the boiler and control automation are made in one housing with dimensions of 45x60x20 cm. A circulation pump can also be provided in the kit. Power consumption - from 9 to 30 kW at a voltage of 380 V; the volume of the heated room is from 225 to 750 m3. This type of device has a greater weight - up to 28 kg.

Boilers of the Turbo line are produced in large sizes, Ochag-Turbo can operate from a network with a voltage of 380 V. Geyser-Turbo and Vulkan-Turbo are designed for three-phase current.

LLC Tyumen TeploLux produces 3 types of devices for space heating, the service life of which is 30 years; They come with a 10 year warranty:

1. Single-phase boiler EOU, operating from a network with a voltage of 220/380 V. The design provides 1 electrode. Designed for space heating from 20 to 250 m2; the maximum temperature of the coolant at the outlet is up to +95°C. Can be installed in parallel with other types of boilers.
2. The three-phase EOU is produced with power from 6 to 36 kW and is intended for space heating from 40 to 120 m2. The heating apparatus has 3 electrodes.
3. Mini-boiler room EOU with 9 electrodes is designed for three-phase current and has a power of 60 to 120 kW.The device is designed for heating residential and industrial premises ranging from 400 to 1200 m2.

SIA Beril, located in Riga, has been manufacturing electrode boilers since 2007. In 2012, the company registered its own BERIL apparatus. The boilers are covered by a lifetime warranty: 10 years. Only BERIL or BERIL V.I.P. is used as a heat transfer medium.

General information and description

The coolant of the heating electrode system is antifreeze. Model Galan-Vulkan: The most powerful mini-boiler in the brand line.

The heated water is pushed up, providing the functions of a circulation pump. In addition, Galan electrode boilers are distinguished by the presence of heating automation with a simple device control system. The volume of water to fill the system l.

They have three power levels, which allows you to: Evenly load the supply networks.

The presence of a safety group pressure gauge, blast valve, deaeration valve at the top of the system is mandatory. For a month of continuous operation, this equipment consumes approximately kW. The listed elements are already necessarily built into a modern heating system.

We recommend: Covering the cable with a brick

There are no other negative reviews, only messages from those who offer boilers with heating elements or other brands. Modern metal alloys are highly resistant to electrolytic solutions. The use of modern automatic systems, mobile adjustment of parameters, support for the selected work schedule. One of the features of electrode boilers is the exactingness to the coolant.

They allow you to automatically monitor the correct operation of the device, as well as to configure it.Compact design combined with high power W allows you to use the model for heating a private house with a total area of ​​up to m2. Production of heat energy taking into account the heated space, without exceeding or underestimating the output energy due to a special built-in automatic system.

Attached equipment, an expansion tank and a pump are not included in the delivery, so their parameters are pre-calculated, and the equipment is purchased separately. They are also used to heat roofs and drainpipes, open areas and steps from which snow or ice must be removed. This creates a sufficiently large pressure in the boiler. The method of connection to the heating system is not critical. The power of these heating units is from 2 kW to 6 kW.

In both cases, the electrical heating appliance has the shape of a rectangular cabinet, which is suspended from the wall. Boiler Galan.
Tests of the electrode boiler. Honest report...

Galan electrode boilers: principle of operation

Galan electrode boiler

The greatest interest among the consumer is caused by Galan electronic heating boilers. Despite their small size, they generate a sufficient amount of thermal energy to heat the coolant.

The main feature of the design is the principle of its operation. No heating elements are used to raise the temperature - Galan electrode boilers operate on the principle of water ionization. The electrodes split the molecules into positive and negative. Each species moves towards the electrode with a reverse charge. The electronic unit changes poles with a frequency of 50 times / sec, resulting in ion oscillations. This causes an increase in temperature.

This principle of operation made it possible to minimize the size of the equipment. Positive feedback about Galan heating systems is associated with this factor. So, the smallest model, Ochag 2, with a rated power of 2 kW, has dimensions of only 35 mm in diameter and a length of 275 mm. And this is with a weight of 0.9 kg.

Installation methods for Galan boilers

But you should not immediately plan the electric heating of a Galan private house. This system is characterized by a number of operational features that must be taken into account:

• Distilled water must not be used. The ionization process will require the content of salts in the coolant. Therefore, the manufacturer recommends pouring ordinary drinking water (after salting, in the proportion of 1 tablespoon per 100 liters), or branded liquid for heating;
• The package of Galan heating boilers does not include a pump and an expansion tank. For small highways up to 20 r.m. this is compensated by the pressure created in the ionization chamber. In the process of heating, this figure rises to 2 atm;
• A control unit for Galan heating boilers must be installed. It regulates the power of the device depending on the installed power. It provides the ability to connect to external temperature sensors, as well as a remote control system (SMS).

The main advantage is the choice of installation scheme. In heating systems with a Galan boiler, other heating devices may be present - solid fuel or gas-powered. If in the future it is planned to expand the living space, it is possible to install additional boilers in parallel to increase the total heating capacity.

Series of boilers Ochag

Optimal configuration of the Galan boiler

Models of this series are the most low-power and can be used to organize electric heating of a small private Galan house or apartment. Often they are installed without circulation pumps - the pressure created in the ionization chamber is enough.

The rated power of the Ochag series models varies from 2 to 6 kW. It should be remembered that only the heating block is included in the package. Additional equipment (RCD, programmer) must be purchased.

For the correct operation of Galan electric boilers in home heating, you need to familiarize yourself with their characteristics:

• The volume of the heated house is from 80 to 200 m³;
• Power supply - network 220 V;
• The cross section of the copper conductor of the conductive line is 4 mm², except for the Ochag-6 model. For it, electrical wiring with a cross section of 6 mm² should be provided;
• The volume of the coolant directly depends on the power of Galan electronic heating boilers.

A series of boilers Geyser and Volcano

For more powerful systems, it is recommended to purchase boilers of the Geyser and Vulkan series. Structurally, they are no different from the Hearth, but are designed to heat a larger volume of coolant. Galan electric heating organized with their help can provide constant power from 9 to 50 kW. Since a standard power line cannot cope with such a volume, a 3-phase 380 V connection will be required. For this, a separate permit must be issued. This fact must be taken into account when choosing a heating scheme.

Geyser series boilers

Technical characteristics of boilers for heating systems Galan of the Geyser and Volcano series:

• Residential volume of the building - from 340 to 1650 m³;
• Power supply - network 380 V;
• The cross section of the copper conductor of the conductive line is from 4 to 6 mm²;
• The recommended amount of coolant is indicated in the table.

Boilers of this series are used not only for autonomous heating of private houses, but also for industrial and commercial premises.

Why are Galan electric boilers popular and interesting?

More and more often, consumers are choosing heating equipment from foreign manufacturers.

But there are also domestic manufacturers of heating devices, which should also be paid special attention.

Among a wide range of manufacturers, electric boilers of the popular Galan company are in great demand. The electric boiler of the Russian manufacturer Galan is a reliable device that is reliable, economical and compact in size.

1 A bit of history about Galan

At first, the company was engaged in the production of electrode devices, which were most often used in different directions.

And more recently, the company began to develop and produce electric heating boilers for space heating. The main advantage of this Galan boiler is their high efficiency, which can reach up to 98%.

At the same time, attention should be paid to its small compact size. Mostly among consumers you can find good reviews about the electric boiler on the Internet.

You can find and purchase these products even in such large cities as Moscow, Ryazan, Pskov, Samara and other smaller cities of Russia. Additional representative offices are located on the territory of Ukraine and the Baltic states.

Electric boilers for space heating include the following types:

For example, if you want to heat small rooms, then such boilers for heating Galan from the OCHACH series are ideal for you. This type of boiler has a small weight and size of 335 x 35 and has a small power of 2 to 10 kW.

Types of electric boilers Galan

But a heating electric boiler from the Geyser or Volcano series is suitable for heating large rooms and barns. Their advantage is that they emit a large amount of heat due to the splitting of water molecules. In this case, a circulation pump is not required in these boilers.

These heating boilers can be controlled by electronics, which accurately monitors the temperature of the water at the outlet and in the course. Also, electronics serves to maintain the optimum temperature in the heated room, as a result of which it allows you to spend less energy and save on it.

The heating element in Galan heating boilers is a conventional coolant, which eliminates heat loss if intermediate materials are heated. If we compare electric boilers with a heating element heater, then Galan corresponds to the quality and wins more and more buyers of the Russian manufacturer throughout Russia.

The manufacturer Galan produces boilers of the Galax series, which should also be paid attention to. These models use a film heater

You should pay attention to such a heating boiler as Galan from the Stealth series. These boilers are designed for heating industrial premises.

Electric boiler manufacturer Galan in the heating system of a private house

In most cases, they are wall-mounted models with 27 kW power, and they also have a built-in overheating protection system. The characteristics of these models differ from the typical ones in terms of power and automation.

The advantages of the Galan electric boiler are as follows:

1. The coolant does not require special preparation.
2. These boilers are used in closed systems.
3. Small weight and dimensions.
4. Easy installation and connection.
5. Embedding systems.
6. Saving electricity.

Heating boilers have two control models. And this is electronic control and mechanical control. Connecting these boilers only to a three-phase network with the mandatory use of automation for protection. The main advantage is the price category, when compared with foreign manufacturers.

Again, their main advantage is the price issue. Naturally, the price will vary depending on the power and type of boiler. If we consider the average price range, then the price varies from 3,500 rubles for electric models, and 25,000 rubles for electric heaters manufactured by Galan.

Electric boiler Galan in the heating system

The cost of these products is not overstated and fully corresponds to the quality and configuration of the boilers, when compared with other boilers of a foreign manufacturer.

Is it possible to save money with an electrode boiler

To determine the economics of installing an electrode boiler, a number of factors must be taken into account:

• the overall degree of electrification of the building;
• the level of thermal insulation of heated rooms.

When deciding on the advisability of using an electrode boiler for heating a house, we will consider the advantages and disadvantages of this type of heating apparatus.

Installation of the boiler on the base

In favor of the electrode apparatus is the fact that electricity is used as an energy carrier, which is present almost everywhere. There is no need to lay a gas pipeline or take care of the purchase of fuel. You can turn it on and off remotely, which makes it possible to warm up the room in advance in winter.

The use of a special liquid with a low freezing point as a coolant allows you to leave the heating system filled even in frost, without fear of damage to pipes and batteries.

When heating rooms with electric heaters, there is no emission of harmful substances, therefore, additional ventilation is not required. The closed circuit of the heating system protects the heat carrier from evaporation.

The decision to switch to an electric electrode boiler is easy to implement as it is compact and easy to install. At the same time, there is no need to abandon the previously installed heat supply system using the combined option.

If it is required to provide heat to a large number of rooms, parallel installation of several devices is possible. This will make it possible to change the degree of heating by turning them on and off.

The devices, made in a double-circuit version, allow you to provide hot water. Based on the heating area and the degree of thermal protection, you can choose a device with the required power from 2 kW to 50 kW.

The selection of the apparatus is made depending on the volume of the coolant circulating through the system. Therefore, before buying, you should calculate the batteries based on the ratio of 10 liters of liquid per 1 kW of power.

For ease of installation, floor and wall options are provided.

A small boiler in the apartment with a pump.

High efficiency and relatively low price are also advantages of the electrode boiler.

The disadvantages of this type of heating may be increased requirements for the quality of the coolant.

For high-quality and durable work, special water treatment and its annual measurement at the end of the heating season are required.

But it is possible to use a special low-freezing liquid, which prevents the system from defrosting in winter. In this case, preventive maintenance and repair of equipment is carried out in the off-season every 3 years. Regular flushing is not required.

The electrodes included in the ion boiler are consumables and require replacement after 3-5 years. But subject to the requirements that are set out in the passport for the device, the service life reaches 10 years.

Electric boilers need grounding, but the same requirements apply to other high power electrical appliances. Creating a unified grounding system avoids many problems, especially if there are small children in the house.

Models of electric boilers

The principle of any electric boiler is the conversion of electricity into heat. Electric units are not the most cost-effective, but the efficiency of their use is 95-99%, which is good enough for such units. Such boilers are divided into three types according to the type of coolant. Let's talk about each of them in more detail.

Tenovy electric boiler

Electric heating boilers equipped with heating elements work on the principle of an electric kettle. Water passes through tubular heating elements - heating elements.Acting as a heat carrier, it passes through the entire heating system, circulating with a pump.

One of the advantages can be called its compactness, neat appearance and the ability to mount on the wall. The installation process will not cause any particular difficulties, and the operation is comfortable and simple, thanks to the sensors and thermostats. Automation allows you to maintain the desired heating, focusing on data from sensors that measure the ambient air temperature.

The coolant can be not only water, but also a non-freezing liquid, due to which scale will not form on the heating elements, which cannot be avoided using water.

Attention. Scale formed on heating elements impairs heat transfer and energy-saving properties of an electric boiler heating. This option for heating a house is also good because it has a low cost.

For the convenience of adjusting the consumption of electricity, it is equipped with several heating elements that can be turned on separately

This option for home heating is also good because it has a low cost. For the convenience of adjusting the consumption of electricity, it is equipped with several heating elements that can be turned on separately.

Electrode Electric Boiler

The principle of operation of an electrode electric boiler for heating a house is completely different from the previous model. The liquid is heated not by a heating element. The electrode, installed in the housing, gives the liquid an electric charge, under the influence of which the molecules are split into negatively and positively charged ions.The coolant has its own resistance, which provides intense heating. Either water or a special composition (similar to antifreeze) is poured into the system.

This type of electric unit for heating the house is completely safe, if a liquid leak occurs, it will simply turn off. Electrode models are very compact (looks like a small cylinder with nozzles), equipped with sensors for measuring ambient temperature, controlled by automation.

The maintenance of this model comes down to replacing the electrode, as they gradually dissolve as they work, which worsens the heating of the house. It is also necessary to monitor the proper operation of the circulation pump so that the liquid in the system does not boil. Correct and efficient operation of an electrode electric boiler for heating a private house is possible only with prepared water - it must have the required resistivity value. Measuring them yourself is not always convenient and simple, just like preparing water. Therefore, it will be easier and more reliable to buy a liquid specially designed for operation in electrode boilers.

Electric induction boiler

This type of electric heating unit for the home works on the basis of induction heating of a liquid with ferromagnetic alloys. The inductive coil is located in a sealed housing and does not have direct contact with the coolant that flows along the perimeter of the device. Based on this, not only water, but also antifreezes can be used as an energy carrier for heating a house. This electric home heating boiler is not equipped with a heating element or electrode, which improves its efficiency.Also, the absence of heating elements ensures complete safety during operation. This version of the boiler for heating the house is not subject to scale formation, practically does not break and does not flow.

The downside of induction models is only their higher cost and large dimensions. But over time, the size problem is eliminated - the old ones are replaced by improved models.

In addition to this classification, electric boilers for heating a private house are divided into:

• single-circuit (designed only for heating the whole house);
• double-circuit (provide not only heating throughout the house, but also water heating).

You also need to highlight:

• wall boilers;
• floor boilers (high power models are produced).

Galan Navigator Basic automation for the boiler Galan

Digital temperature controller Galan Navigator Basic consists of a housing, an electronic unit with connected temperature sensors (red - supply pipe and blue return pipe); indicators of operation of heating stages; circulation pump on indicator; indicator of inclusion of the external regulator of room temperature; indicators of the return channel (blue) and supply (red); temperature indicator; control knobs; switch; adapter block for connecting the circulation pump and supplying power to the control unit 220 V; relay-contactor (in the H2 version there are two contactors, 4 in the H3 version - three contactors); current controller 12 (for tubing option); zero bus.

Temperature control is carried out on two channels from the supply pipe sensor (red) and the return pipe sensor (blue). The return sensor is the main control sensor.The supply sensor is an emergency to prevent boiling and a backup in case of failure of the return sensor. Adjustment range: Recommended values: Return: 10–80°С. Return: 35–40°C. Feed: 10–85°C. Feed: 70–75°C. Hysteresis: 1–9°C Hysteresis: 3–5°C In this manual, the hysteresis is the temperature difference between switching off and then switching on the boiler. When the unit is turned on, display 7 shows the current return temperature, blue LED 6 lights up. The dot in the upper left corner of the indicator lights up, indicating a signal to turn on the circulation pump. To reduce the peak load on the network, the heating stages are switched on sequentially. 30 seconds after the pump is turned on, the first heating stage is activated, 10 seconds after the first stage is turned on, the second one, then after another 10 seconds, the third heating stage. As the heating system warms up, the heating stages are switched off one by one to increase the efficiency of the system. At a temperature set minus the hysteresis, the third stage will turn off, and the set minus half of the hysteresis will turn off the second stage. Controls and indications of the “Navigator” temperature controller 5 When the set temperature is reached, the heating will turn off completely. To cool the boiler, the circulation pump runs for another 30 seconds after turning off the heating and then turns off. During the cooling period of the system, in order to equalize the temperature field, the circulation pump is switched on for 30 seconds every 5 minutes. When the system cools, the stages are also turned on in turn. When the maximum set flow temperature is reached, the heating is completely switched off until the temperature drops by 9°C.Thermal sensors are installed on the metal parts of the heating system at a distance of 30-50 cm from the boiler. The temperature controller has two 6P4C sockets for connecting external devices for controlling the air temperature in the room. When these devices are connected and the set air temperature is reached, the heating is completely switched off, the signal dot lights up in the middle upper part of the indicator. A series of KT thermostats is designed for electrode boilers and incorporates a current controller, which, when the rated current value is exceeded, turns off the heating for 3 minutes, after which the heating cycle is repeated. When the current controller is triggered, the color of the LED changes from green to red.

The maximum allowable electric power output "pump" is not more than 200W. If it is necessary to use a circulation pump of higher power, the connection should be made through the switching equipment. The Navigator digital temperature controller is available in three versions. Option H1 (Basic, Basic KT), designed for single-stage boilers, only the first stage is used. Option H2 (Basic +, Basic KT +) is provided for heating systems with two heating stages. Option H3 (Basic T, Basic TT) uses all three heating stages.