Electric convectors for wet bathrooms

8 AEG WKL 753 S

The convector-type device is distinguished by an optimal power of 750 W for the bathroom, a moisture-proof housing, it looks aesthetically pleasing, and the device is safe for health. A significant advantage of the design is the equipment with a remote control, the possibility of automatic climate control. The operation of the device is based on mechanical control, which even a beginner in the operation of such equipment will quickly get used to.

In the reviews, the owners of the model indicate the presence of a thermostat, which helps to create a comfortable microclimate near the bath.A special fuse protects the device from overheating, the consequences of power surges in the mains. Among the shortcomings, one can single out the absence of a timer, the weight is 4.2 kg, so it is recommended to mount the accessory on the wall not overhead. In general, the build quality of the product, the equipment corresponds to its cost.

Choosing a convector

There are a wide variety of convectors on the market today. In some cases, their characteristics vary quite a lot, and an uninitiated user may simply be confused - how to choose electric heating convectors? There are a few simple guidelines to help you make the right choice.

Device power

The heat in your home depends on the power of the convector used. At the same time, choosing the most suitable device is quite simple. Approximately 1 kW of power is enough for high-quality heating of a room with an area of ​​10-12 m2, provided that there is no centralized heating in this room. If it is (and works), then this convector power is enough for a room twice as much. That is, an area of ​​20-24 m2.

Technical characteristics of electric convectors

However, when choosing electric heating convectors for a particular room, in addition to the area, its purpose should also be taken into account. For example, a living room and bedroom that are equal in size may require a more powerful appliance than a kitchen of the same size.

Installation

Heating convectors 220v are of two types - mobile and stationary. In the first case, you can move the device anywhere in the room - as long as the cord reaches out. But stationary electric convectors should be mounted on the wall.

Control principle

Even the simplest electric ceramic heating convectors have a special power regulator, with which you can always adjust the degree of heating of the room.

Of course, such convectors are somewhat more expensive, but with their help you can ensure the most comfortable temperature. In this case, you will only need to set the program once - and not periodically control the heating of the device.

The principle of controlling a group of electric convectors

Modern best electric heating convectors lend themselves to some modernization. In particular, you can purchase an additional unit - and then you can control the convector from a distance - using a special remote control. This is quite convenient if the convector is located, say, in a children's room. You can adjust the temperature without entering the room.

Safety

Today, there are waterproof models of convectors - they are perfect for rooms with a high level of humidity. You can install such a convector in the bathroom and not be afraid that something unexpected will happen.

Convector in the bathroom

In addition, almost all convector models are equipped with special overheating sensors. That is, if the device is heated to the maximum temperature, it automatically turns off. Depending on the model, switching on can also be automatic or manual.

The size

There are a wide variety of convectors on the market. They can be of various shapes (square, rectangular), differ in thickness and even color, as shown in the photo. You can choose the device that you need the most.

Dimensions of electric convectors and their power

The difference between a convector and a fan heater

Despite some similarities between these devices, they also have fundamental differences. Convectors, as you might guess from the name, work on the principle of convection of air flows. Air enters the appliance through the lower grate, passes through the heating element, thereby raising its temperature, and returns to the room through the upper grate. The hot layer moves up, and the cold cooling air descends. The larger the heating element, the faster the room will heat up. As soon as the device is turned off, the air begins to cool.

During the operation of the device, the temperature is automatically monitored in order to avoid excessive heating of the air. In the mechanical version, control is possible due to the presence of a ceramic plate, and in the electronic version, microcircuits are designed to implement this function. In the latter case, the specified temperature is maintained with an accuracy of 0.5 degrees, which leads to more economical power consumption during operation. Accordingly, the price of convectors with built-in electronics is higher.

They produce floor and wall models. Floor mounted in the center of the room for its uniform heating. It is advisable to hang wall hangings in places where cold air comes from, for example, an outer wall with windows.

A fan heater is a more budgetary, but no less effective heating device. Its principle of operation differs from the operation of a convector device. Cold air streams fall on the heating element and, with the help of a fan, spread throughout the room in a given direction.Thanks to the operation of the fan, there is a rapid mixing of cold and warm air masses. Its power is approximately 1.5 - 1.8 kW. Fan heaters are floor, wall, ceiling.

As an element that provides heating in such devices, use:

1. Open electric spirals. Devices with such an element are the most inexpensive and short-lived. During operation, they burn oxygen in the room and emit an unpleasant odor that is formed when dust and other particles get on the open surface of the spiral. Plus, it heats up the room very quickly.
2. closed spirals. They do not burn oxygen so much and at the same time warm the air very quickly.
3. Ceramic plates. Fan heaters with plates are the most successful option. They practically do not dry the air, do not pollute it with combustion products, heat up faster than spirals.

Device cost

The cost of devices may depend on their size, type of installation, power, type of device and its heating element, as well as on the manufacturer.

fan heaters	Cost, rub	Convectors	Cost, rub
ELECTROLUX EFH/C 5115 (ceramic)	From 1399 to 1914	Ballu Solo BEC/SM-2000	From 3090 to 3600
Timberk TFH S10MMS	489 to 779	ELECTROLUX ECH/AG-1000 MFR	From 2100 to 3590
Ballu BFH/S-03N	From 449 to 599	Crown 2 kW N16	800 to 1470
VITEK VT-1759 SR (ceramic)	From 1798 to 2749	Ballu PLAZA BEP/EXT-1500	From 5509 to 6490
Scarlett SC-FH53K10 (ceramic)	From 1390 to 1690	Noirot Spot E4 1000W	From 6400 to 7000
WWQ TB-25W (ceramic wall mounted)	From 1950 to 2179	Tefal Vectissimo CQ3030	From 2800 to 3899
Supra TVS-PS15-2	From 890 to 1200	Polaris PCH 1588D	From 3990 to 4100

What power to buy the device?

When selecting the power of the device, you can use the following formula: for every 10 sq. m. of the area of ​​​​the room should account for 1 kW of the power of the electric convector, provided that the height of the walls in the room does not exceed 2.7 m. With a higher room height, an additional 10% of the power should be added for every additional 10 cm.

In addition, other points must be taken into account:

• in order to ensure a good indoor climate with the help of electric convectors, it is necessary to install a number of convectors in the room equal to the number of windows in it;
• if you need a device for a corner room, a room with a large glass area or a room located above a cold basement, then in this case you should choose a good high-power convector.

Given these points, you can choose a good electric convector. While in the store, you can seek help from consultants who will make it easier for you to choose a heating device.

Heating element

Electric convectors are equipped with various heating elements. The most inexpensive solution is steel products found in the cheapest appliances. The high temperature of the heating coil (up to +160 degrees) allows the room to warm up quickly. However, coils of this type have a low degree of safety: phenomena such as the accumulation of dust or accidentally ingress of water can cause the device to ignite. The popularity of spiral convectors is explained, first of all, by their cheapness.Some manufacturers additionally equip the body of the devices with special fans, which, in combination with a high-temperature coil, increases the intensity of heating.

More expensive models are equipped with safe low-temperature coils that heat up only up to +100 degrees. Elements of this type have the form of dissipative radiators made of aluminum with a built-in steel pipe. A special heating thread is inside this tube. Thanks to the aluminum housing, the heating efficiency is noticeably increased. In some models, instead of one, two tubes are used, which allows you to adjust the operation of the heating block.

The different degree of expansion that aluminum and steel exhibit provokes a gradual decrease in the reliability of the connection between the heating tube and the housing. As a result, this can lead to the complete destruction of the connection between them. As a result, there is a danger of local overheating of the tube and breakage of the heating element. Manufacturers of convection equipment are constantly looking for a solution to this problem.

RX-Silence heating devices developed and patented by NOIROT (France) are of particular uniqueness. The innovation of the design of these convector boilers lies in the complete tightness of the silumin body, where magnesia powder filling is used to seal the nichrome heating filament. The coefficient of expansion of the materials used has very similar values, which makes it possible to significantly reduce energy consumption and increase the convector's service life up to 15-17 years.

What it is

An electric heater is especially relevant in cottages and country houses.Of course, it is good when the house already has a stationary heating system. But an electric heater can help reduce the load on the existing heating system or, in an emergency, replace it.

There are other options for heating the room:

• Oil heater;
• Fan heater.

But if you need a device that will:

• Safe;
• Light;
• Compact;
• Quiet.

The most preferred option is a convector.

It is equipped with a reliable housing that covers the heating elements placed inside. The air, passing through the lower special openings, is heated by heating elements.

According to the laws of physics, heated air goes up through the upper holes, heating the surrounding space, according to the principle of heat convection.

This is what distinguishes it from devices that work on the principle of heat radiation.

Structurally, the heater consists of:

1. Corps
2. heating element.

Now it remains to find out which electric convector is better?

Classification of heated towel rails

Dryers are divided into different groups according to type, size, installation method and material.

By type of coolant connection

The type of connection also determines the three types of heated towel rails, and the type of connection plays one of the key roles when choosing a specific model.

Water heated towel rail. Connected to the hot heating system. Heating occurs during the passage of a heated working medium

It is important to choose a model made of material resistant to aggressive water. During operation, there is a risk of destruction of the structure of the internal walls, so the level of rigidity is an important factor when choosing

A chrome-plated stainless steel product is a great option for years to come.

Electric towel warmer.Not dependent on central heating. Requires an outlet at the installation site. Allows you to use yourself when needed. There is a function of independent regulation of temperature data. Differs in the increased energy consumption.

Combined heated towel rail. The most practical scheme for installation at home. You choose the type of connection that is convenient for you. The alternation of the heating method is optimal in different seasons of the year. So, you save money on utility bills. The cost of this modification is an order of magnitude more expensive than the above analogues.

Divided according to size

This variety is more of a design definition than an actual characteristic, it all depends, tritely, on the ratio of height and width.

• Horizontal towel warmer. Combines the features of a dryer and a radiator for heating. Installed as a window sill. Will fit into any design. Does not occupy a large area during installation.

• Vertical heated towel rail. It takes up much more space for placement on the wall. Provides a large usable drying area. Available in exclusive shapes that will make your home decoration spectacular.

Type

There are 3 types:

1. Water.
   Work from hot water. The advantages include durability, strength, no additional maintenance costs, low cost. There are no maintenance requirements, replacement is required mainly not because of a breakdown, but for aesthetic reasons. The disadvantage is the dependence on hot water or heating (to which the dryer is connected). Some devices work only in winter, when the apartment is heated.Others become cold when there is no movement of hot water through the pipes.
2. Electric ones are connected to the network for permanent operation.
   Their disadvantage is expensive maintenance. They are easier to install than water ones, because you do not need to drill walls, connect to a water supply system, or use additional fittings.
3. Combined combine the characteristics of both types.
   These heated towel rails are connected to both a hot water source and an electrical outlet. The ability to change modes allows you to always maintain a comfortable temperature in the room.

By material

Dryers are made from different materials:

1. Stainless steel will withstand high pressure. The walls of the pipe must be at least 3 mm thick.
2. Steel is a cheap material. Dryers made from it are not sold now, but they are installed in most of the old houses.
3. Copper is resistant to corrosion and conducts heat well. Such a product will not be heavy, it looks good externally. Check that the pipe is internally galvanized for greater water protection. The disadvantage of the option is the expensive price.
4. Brass has the same "advantages" as copper. Products from it are cheaper. The "minus" is fragility. You should only buy dryers with chrome-plated inner walls.

Other non-ferrous metals, alloys (for example, bronze) can also be used. Such products are rarely used due to their high cost.

Often, non-ferrous metals are used to create designer dryers of non-standard shapes and colors.

Very slippery if surfaces are wet

It is great if a shower cabin is installed in the bathroom. But often this is not the case.Someone wants to wash off fatigue, and someone wants to change the position of the body at the end of a busy day, lie down, dive into the water, feel weightlessness. Getting water and pouring foam into the bathroom is not a problem. How to get into it if, for example, there is an injury or a person is many years old? How not to slip while doing this? And the shower, and the bath, and the tiles on the floor are a source of danger. These are very slippery surfaces if water gets on them.

It is not recommended to grab the coil. It may be hot and may be damaged. It's a stainless steel pipe, it's strong, but all it's holding is two brackets and a heating pipe. Alas, they can be torn off. The coil must not be fixed securely. He is able to create vibration.

The pipe is bent in such a way that there is more heat in the room. So it's dangerous to grab onto it. What to do? Dream of youth and perfect health or get rid of tension, stop trembling and trembling, take care of the nervous system? One does not interfere.

A good bathroom is:

steps and handrails - it doesn't matter that it's not a pool or a jacuzzi;
good heating and ventilation system.

It just seems that these elements are superfluous, that they will interfere. I would like, of course, that the bathroom was spacious, with a window, a window, and the water did not fall on the floor at all, the steam quickly disappeared. Of course, you can remake the premises, regardless of whether it is a private house or an apartment.

However, even with a small area, safety is easy to take care of, there is no need to complicate the situation with redevelopment. Both a private house and an apartment will turn into an ideal place to live.

Having caught fire with an idea, setting a goal

Wiring and all electrical appliances that you want to use here need reliable protection from moisture. Manufacturers usually take good care of this. The case of the washing machine, hair dryer and razor is wonderful, the contacts are protected, the sockets are installed at a precisely calculated distance from the water source, the design is supplemented with special seals and a cover.

But in the case of a chandelier, if it is not a suspended ceiling with built-in spotlights, but an ordinary, pretty ceiling, you still need good ventilation and a heating system. Contacts sometimes deteriorate when exposed to moisture.

Popular Models

If you are going to buy a bathroom convector, be sure to check out our recommendations. by choice of technology - they will help you make the right choice and not make a mistake in your purchase. Let's move from words to deeds and try to choose the most optimal models of electric convectors suitable for heating small bathrooms.

Ballu BEC/EZMR-500

Some buyers cannot find low-power heating equipment in any way. In fact, it is - there are models on sale with a power of 150 W or more, which can easily solve the problem. A typical example of this is the Ballu BEC/EZMR-500 electric convector. It is ideal for bathroom heating. Here are its most important characteristics:

• Low power - only 500 W, which is enough to heat an area up to 8 square meters. m;
• Simple mechanical control - does not affect the cost of equipment;
• Waterproof case - determines the possibility of operation in wet rooms;
• Wall-mounted or floor-mounted - you can install the appliances the way you want.

The dimensions of the model are 46x40x10 cm, and the weight is only 1.3 kg.

Noirit Melodie Evolution (Pinth) 500

Under such a complex and intricate name is an electric convector from one of the most famous and expensive manufacturers. This device is different:

• Precise electronic control;
• Small body;
• The absence of noise and crackles during thermal expansion;
• Quick exit to the operating mode;
• Ability to work with other devices;
• Protected housing according to IP 24.

It is suitable for use in bathrooms, swimming pools, saunas and many other wet areas. The manufacturer claims that this device will be able to work up to 25 years without any breakdowns.

The main feature of this electric convector is a horizontally elongated body only 22 cm high, made of durable alloy. The equipment is designed for wall mounting. If you want to install it in floor mode, then the legs will have to be purchased separately. The power of the device is 500 W, the heated area is up to 8 square meters. m.

Dimplex Small 2ND3 004

If you have a very small bathroom, be sure to check out this electric convector. It has an extremely miniature body and a small power of only 300 watts. The maximum heated area is up to 3-5 square meters

m, which is quite enough for heating miniature rooms, lined with tiles and not having glazing

The maximum heated area is up to 3-5 square meters. m, which is quite enough for heating miniature rooms, lined with tiles and not having glazing.

Electric convector Dimplex Small 2ND3 004 is equipped with a mechanical thermostat, indicator light and overheating protection. Heat is released through rather large slotted holes that deviate towards the rear wall. The dimensions of the device are 26.3x24x10.3 cm, so it will not take up much space on a free wall. Floor mounting is not provided here.

Teplaco

Before us is a quartz electric convector, well suited for use in the bathroom. It gives very soft heat, does not crackle when heated, and can be used to heat rooms for any purpose. The power of the heater is 400 W, which is enough to heat the average bathroom up to 18 cubic meters. The main and only drawback of this heater is its high weight - it is 12 kg.

Principle of operation

Convection is the natural upward circulation of hot air masses due to the different densities of hot and cold air. An electrical device - a convector accelerates the process of heating the air, passing cold streams through hot plates, providing normal pressure and humidity parameters. Heating with convectors is one of the best solutions for cottages and apartments against the backdrop of rapidly rising prices for gas and central heating.

The efficiency is affected by the size of the heating plates of the convector. Their small number in plinth models is compensated by the increased power of the devices.

Water convectors: efficient and effective

Water-type convectors are modern devices that are an excellent alternative to standard radiators.The devices are successfully used in autonomous heating systems of private houses and apartments, as well as in centralized heating networks. Water convectors are reliable, economical and durable, their efficiency is about 95%.

Varieties of water devices

Water convector devices are an ideal solution for rooms with a large glass area. Depending on the model, a water convector can be either an independent heating unit or a source of additional heating.

Thanks to various form factors of equipment, the issue of heating can be solved not only efficiently, but also effectively.

Water convectors are:

• floor;
• wall;
• plinth;
• intrafloor;
• embedded.

All of them occupy a minimum of space, and in the case of a hidden installation, they even save usable space. Installation into the wall, floor, steps, under furniture allows you to save such valuable square meters and provide comfortable heating. Underfloor devices with drainage can be successfully used in rooms with swimming pools, greenhouses, winter gardens, etc.

At the individual request of the customer, the body of the water convector can be painted in almost any color, as well as decorated with wood or other materials.

A variety of design - from laconic classic to bright modern - allows you to easily fit the units into any interior.

Features of various equipment modifications

Water wall convectors are a steel case with a perforated grate located on top, in which a copper-aluminum heat exchanger is placed. The devices are mounted using a special mounting kit, which is necessarily included in their factory package.

Wall mounted convectors are an excellent choice for rooms that need fast and efficient heating and have enough free space for wall mounting. This is the best solution for children's rooms and bedrooms. Not suitable for heating continuous glazing that goes into the floor.

Floor water convectors are usually installed in rooms with a low window sill. They can also be installed near panoramic windows if, due to the low height of the screed, it is not possible to mount the underfloor unit. In addition to the housing with a heat exchanger, such devices are structurally supplemented with a steel supporting base.

Some manufacturers offer water convectors with air conditioning. Thanks to this 2 in 1 equipment, you can heat the room during the cold season, and cool it in the summer.

Such convectors somewhat clutter up the space, however, they fit perfectly into rooms with a modern interior in the style of a loft, modern, high-tech, avant-garde.

Plinth water heaters are practical and compact. The low thermal tension of such convectors allows them to be mounted right next to furniture and various decorative elements. This gives a huge advantage in terms of space organization.

Floor-mounted structures are used to cut off cold air flows coming from windows. The units allow you to effectively solve the problem of condensation on large window glazing (“weeping windows”). Built into the floor level, they do not take up space at all and do not interfere with enjoying a panoramic view.

After installation, floor convectors are covered with a special grating that performs a protective and decorative role.

Types and features of thermostats

Among the most serious, we highlight the following:

• does not hold temperature well;
• consumes large amounts of electricity during operation;
• during the operation of the device, characteristic clicks occur - not only when turned on, but also when turned off. This can be annoying to the wearer.

Compared to a mechanical thermostat, an electronic thermostat has many advantages:

• does not make noise during operation;
• maintains the set temperature with a minimum deviation - it does not exceed one tenth of a degree;
• reduces the energy consumption of the installation within its capabilities;
• "climate control" can be carried out remotely;
• has support for several modes of operation.

Although heating devices equipped with an electronic thermostat have a higher cost, their price tag is quite justified.

Conclusions - what to buy anyway?

So, what is the best electric convector? Ideally, the device should have:

• monolithic or tubular heating element;
• electronic thermostat;
• protection against overheating, freezing;
• the sensor of "deactivation" at capsizing;
• accessories for different installation options - both floor and wall.

Optional, but very useful options can be a timer, remote control and display.

In conclusion, it should be said that electric convectors are a good choice for many reasons. Among their main advantages:

1. No need for preparatory work. No projects, permits, special conditions. Bought, brought, installed, connected.
2. Affordable cost. For 100-150 dollars you can buy a mega-unit.
3. Excellent efficiency.Almost all the electricity consumed by the convector is converted into thermal energy.

Approaching the process of choosing an electric heating convector wisely, you are guaranteed to get a reliable unit that will heat you with high quality on long winter evenings. We wish you an extremely pleasant and useful shopping!