Metal and brick wood-burning fireplaces for the home

How to make a fireplace yourself

Step-by-step instructions for creating an English brick fireplace with your own hands in a room ranging from 20 to 25 square meters. m.

Work order:

• Preparing a site for building a wood-burning brick fireplace with your own hands;
• Purchase of building materials;
• Creation of a foundation of reinforced concrete or brick;
• Preparation of cement mortar and masonry;
• Test ignition and heating of the fireplace.

The best place for a fireplace is in the center of a load-bearing internal partition. It is desirable to conduct a chimney without affecting the roof ridge.

Required materials:

• Ceramic brick - approximately 300 pieces;
• Refractory bricks - about 120 pieces;
• Gate valve (for the chimney);
• Composition for refractory masonry - approximately 150 kg;
• Sand-clay composition for the construction of furnaces - about 250 kg;
• Steel corner 5 x 0.3 cm, length 2.5 m;
• Furnace door.

It is forbidden to use low-quality and used materials for stove masonry.

Fireplace Precautions

For the purposes of fire safety, it is not allowed to place the hearth opposite window openings, in a place that is blown by a draft or next to a flight of stairs. An open wood-burning fireplace must not be left unattended as it can become a source of ignition. To eliminate this drawback, you can put a special protective damper made of heat-resistant glass on the fireplace hearth. Of course, the appearance of the fireplace will change because of this, but it will become safer, because fire-resistant glass will protect both the person and his personal property.

In order for the hearth to work for a long time, delighting its owners with warmth and comfort, it is necessary to follow some rules:

• Firewood for the fireplace should be dry, medium in size.
• It is not recommended to lay a large amount of firewood at once, as when flaring up, they will create a strong emission of smoke and fire. This will cause the portal to become sooty.
• Firewood should not be fired with tarry coniferous wood. When they burn, sparks fly and the walls of the chimney are intensively polluted with soot.
• Coal and its derivatives must not be burned in a wood-burning fireplace.To use such fuel, a special firebox must be provided.
• At the end of the fireplace, before closing the chimney, it is necessary to check that the firewood is completely burnt out. It is not recommended to use water to extinguish coals.
• When the fireplace is burning, do not open windows and doors abruptly, creating drafts in the room.

A wood-burning fireplace will decorate your home, give comfort and peace. Every evening will become romantic: you will be able to look at the burning fire, listen to the crackle of the flame, enjoying communication with family and friends.

Advantages and disadvantages

The use of a wood-burning stove for home and summer cottages (modern version) in many cases has significant advantages:

• Ease of installation and operation.
• Efficiency and economy. A high level of efficiency and careful consumption of firewood is provided by various technological methods, from the shape of the exhaust pipe to the long-term burning mode.
• Fast effect from work. Heat from a working stove spreads quickly, a comfortable temperature is established within half an hour.
• Compactness. Especially valuable quality in small country houses. Such a heater can be installed in any room (if there is a chimney).

Video description

About the stove after two years of use in the following video:

• Multifunctionality. Modern models delight with thoughtful functionality. There are options that can switch to another fuel (coal or waste from the woodworking industry). Many models can be used not only for heating, but also for cooking or heating water.
• Safety.Properly installed (according to the rules of SNiP) furnaces comply with all safety standards, regardless of the design and material of manufacture. Many units have the ability to adjust the combustion or afterburning of gases.
• Appearance. A wood-burning stove can become a decoration of a home. Manufacturers offer options for the interior, decorated in any style. You can purchase a model in a modern, strict and rational design, or in a national one, using spectacular details (up to hand-painted tiles).

Heat resistant tiles

Many consider the disadvantages of wood heating:

• Features of brick ovens. Such designs are famous for being able to retain heat for a long time, which is ideal for a house in which they live permanently (or for a long time). For houses where they spend 1-2 days, the metal version is more suitable.
• The size. A bulky stove will take up a lot of precious space in a small house, a small one may not be able to cope with heating if its capabilities are not designed for spacious housing.
• The complexity of security. An open flame is not only beautiful, but also carries an increased risk of fire, and therefore requires constant attention. Installing the stove on a prepared base and protecting it with metal foxes does not seem to everyone to be a safe enough option.

Wood-burning stove for heating a house with a dedicated place for firewood

• Fuel. Firewood must be of good quality (dry), otherwise the stove will not last long. The wrong firebox also increases costs.
• Additional problems. Not everyone is ready to put up with the fact that firewood takes up too much space, and the stove needs regular (too frequent) cleaning.In some cases, a wood-burning stove becomes not an economical option at all (if the owners forgot that not only firewood costs money, but also their delivery).

Prices for wood stoves

The secret behind the popularity of wood-burning stoves lies in their versatility and variety of offerings. On the market you can find both budget compact options and luxurious units that can decorate the most sophisticated interior. No matter how charming the stove has, constantly throwing firewood into the firebox is a boring task, so more and more owners of country cottages prefer long-burning stoves.

A modern take on the traditional way of heating a home

If you look at the average prices (in the Moscow region), they will look like this:

• Metal ovens. Heating: 5-16 thousand rubles. (depending on design). Heating and cooking: 9-35 thousand rubles. (domestic and imported). Fireplace stove: 20-40 thousand rubles. (may have a plate and a heat exchanger).
• Cast iron: From 20 to 120 thousand rubles, depending on the size and design.
• Furnaces lined with tiles (tiles): 50-80 thousand rubles.
• Stone (from granite to Brazilian sandstone): 60-200 thousand rubles.
• With a water circuit: 20-55 thousand rubles.
• Long-burning furnaces: 15-45 thousand rubles.
• Potbelly stove: 9-16 thousand rubles.

Conclusion

Heating a private house with wood is often the most practical way, affordable and inexpensive. Many are unable to refuse to burn wood because of the special feeling of comfort inherent only in an open flame, which cannot be obtained from heating units operating on other fuels. In any case, wood stoves will continue to warm houses and serve as decorations for a long time to come.

Fireplaces in a country house

In fact, the ancestor of the modern fireplace is a primitive open hearth, designed exclusively for heating the room and cooking over an open fire. This element of the interior did not carry any decorative functions. Despite the relatively simple design, the process of building fireplace stoves still has its own specific nuances, which must be taken into account even at the stage that involves the design of a residential building. This approach will help in the future to avoid many mistakes, the correction of which will require spending a lot of money from the family budget.

We use useful space - shelves above and below the fireplace

In a modern interior, a fireplace does not often perform its main function - heating the room. Radiators or underfloor heating are enough to heat the house, and the fireplace serves rather as a symbol of home comfort and simply brings the owners the joy of communicating with live fire.

And yet, the fireplace has the opportunity to become not just a hearth, but a place of storage, where the objects most dear to the heart of the owners are collected. It is the mantelpiece that traditionally serves as the visiting card of the house and a lot of attention has always been paid to its design. On a shelf above the fireplace, it is appropriate to place a collection of souvenirs from different countries, photographs of loved ones in beautiful frames, special, so-called mantel clocks or just candles and elegant flower vases.

The shelf under the fireplace is used more utilitarianly - usually firewood and supplies for caring for the hearth are simply stored here.

Elegant candlesticks and antique mantel clocks are the perfect way to emphasize the classic style of the room and decorate such a prominent part of the interior as a shelf above the fireplace.

Often, a shelf above the fireplace is ordered and manufactured separately, after the hearth has been installed, differing markedly in design and style. Such a shelf can serve as a stand for a mirror, picture or TV panel.

Various designs of fireplaces in the house - photos, interesting ideas

A wood-burning fireplace with an open firebox looks harmonious in a classic interior.

Typical elements of such solutions are:

• symmetrical shapes;
• natural finishing materials;
• lack of glass, other modern details.

Such products decorate and functionally complement forged elements, tongs and other accessories. Figurines and other decorations are placed on a large shelf.

Classic fireplace in a modern interior

The built-in metal firebox provides a high level of security, and the neutral appearance of the door does not interfere with the overall style.

Pay attention to the separation of the TV and other niches with thick partitions. Insulating material is installed inside these walls.

The following photos with different types of fireplaces for a private house will help clarify your own requirements for appearance and individual functional elements.

2 ZeFire

A very interesting candidate for the title of the best in the category is presented by the young and talented domestic company ZeFire, which has won the title of a creative manufacturer of modern bio-class fireplaces.

The main "chip" of the company is an individual approach to each client.Any buyer can order a biofireplace according to a unique design drawing, the work on which is undertaken by a real design department. Each (even the most insignificant) touch is coordinated directly with the customer, which allows the most accurate implementation of the desired project. In many ways, it is the loyalty to the wishes of consumers that makes ZeFire a real contender for high places in the rating, even despite such a short period of existence on the market.

Advantages:

• close individual work with each client;
• the possibility of developing bio-fireplaces according to the original project;
• selection of materials based on user preferences.

Flaws:

not always well thought out concepts.

Rating of long-burning furnaces made of cast iron

Most experts recommend installing models made of cast iron, as they have a much higher efficiency than other models. At the same time, they give off heat perfectly, despite the small firebox. It is possible to use any solid fuel: firewood, coal and other types. The cost of such furnaces is higher, but their service life is longer. Some worry that the appearance of cast iron fireplaces is not the same as that of ceramic ones.

Do not worry: today the masters have learned to pay great attention to the aesthetic side of the issue

Marseille 10

This is a small and beautiful fireplace from Meta. Suitable for heating suburban areas. It takes up little space, but is characterized by increased productivity. There is a viewing window that will allow you to enjoy the view of the fire. It is large enough. At the same time, smoke will not get inside the room, which is an advantage over open-type fireplaces.Compared to steel structures, more thermal energy is required to obtain the desired result. But the heat is retained for 7 hours longer. The model is designed so that it can fit into almost any interior.

Marseille 10

Characteristics:

• wall type;
• 10 kW;
• chimney 50 mm;
• glass door;
• lining - fireclay;
• weight 105 kg.

pros

• small size;
• high performance;
• stylish design;
• large viewing window;
• low price;
• ease of installation;
• comfortable handle.

Minuses

stands and attracts the attention of everyone, the design is slightly inferior to more expensive models;
small size does not allow to heat a large house.

oven META Marseille 10

Kratki Koza/K6

An excellent model, which is included in the rating of fireplace stoves due to its stylish design, low price and high performance. The user can independently regulate the level of heat using a special lever. He is responsible for supplying air to the furnace to control the combustion process. Thus, if it is necessary to put out the fire, the air supply must be turned off. This is a great option that allows you not to wait for the fuel to burn itself out. There are active and passive combustion modes. The former is used during the day, and the latter is needed to maintain the temperature during the night. Glass can withstand temperatures up to 800 degrees.

Kratki Koza/K6

Characteristics:

• wall type;
• 9 kW;
• flue 150 mm, connection to it is possible from above or behind;
• glass door;
• lining - fireclay;
• weight 120 kg.

pros

• beautiful appearance;
• good performance;
• convenient management;
• acceptable price;
• you can enjoy the fire, the door is large enough;
• several ways to install a chimney.

Minuses

• you can not cook food;
• fuel only firewood or special briquettes.

Wood-burning stove-fireplace Kratki Koza K6

Ardenfire Corsica 12

A very reliable and beautiful stove for a summer residence, which is made in France. It is compact, and the connection is made using the top panel. There is a function of secondary afterburning and clean fire. The price is moderate, and installation problems, as a rule, do not arise. Suitable for rooms up to 200 sq. meters.

Ardenfire Corsica 12

Characteristics:

• wall type;
• 12 kW;
• connection to it is possible from above;
• glass door;
• lining - fireclay;
• 130 kg.

pros

• looks beautiful;
• convenient to manage;
• there is pure fire and afterburning;
• Efficiency 78%;
• reliable and well-known manufacturer;
• fuel - any solid materials, except for fuel briquettes.

Minuses

• heavy construction;
• overpriced.

Ardenfire Corsica 12

Vermont Castings DutchWest XL

Studying the rating of long-burning fireplace stoves, you should definitely consider this model. It uses a patented air supply system to the furnace, which increases its efficiency. From one supply of firewood, heat can be stored indoors for up to 12 hours, which is an excellent indicator. The glass is treated with zinc oxide for increased strength. At the same time, it gives off more heat compared to standard refractory. A built-in thermometer allows you to monitor the temperature in the room. Fuel is loaded through the front or rear doors.

Vermont Castings DutchWest XL

Characteristics:

• wall type;
• 16 kW;
• can be connected from the back or side;
• glass door;
• lining - fireclay;
• weight 280 kg.

pros

• heating area up to 20 sq. meters, therefore suitable for large houses;
• high efficiency (74%);
• any fuel can be used;
• pleasant appearance;
• you can put something on top;
• convenient and safe loading of fuel during the operation of the fireplace;
• there is a thermometer.

Minuses

great weight.

Vermont Castings DutchWest XL

These are the main wall-type models made of cast iron, which are included in the rating of long-burning heating furnaces.

Installation site differences

Wood-burning fireplaces for the home differ not only in the materials of manufacture, but also in the place of installation. Each option has its own advantages, so there is no one-size-fits-all solution. To begin with, we will consider corner fireplaces with wood. Already from one of their names it is clear that they are mounted or assembled in the corners. Here are the benefits of this placement:

• Space saving - it cannot be said that it is so weighty, but the corner installation visually looks more compact;
• Ability to heat adjacent rooms - you can heat two rooms, but this is most relevant for homemade brick fireplaces, folded properly;
• Corner wood-burning fireplaces can be placed not only in internal corners, but also on protruding ones - an excellent advantage for irregularly shaped rooms.

Such wood-burning fireplaces are most suitable for small spaces - the main thing is to choose what is the best angle to give for placement.

According to users, corner wood-burning fireplaces add more comfort to rooms than any other types of stoves.

There are many of the most incredible and sophisticated designs of fireplaces. Picking something for yourself will not be a problem.

Wall-mounted wood-burning fireplaces can be purchased or homemade. They are installed and assembled close to one of the walls.Moreover, the firebox can be located parallel or perpendicular to the walls of the house - it all depends on your preferences. By the way, this is the most common accommodation option used by many consumers. And there are quite a lot of wall-mounted units on sale.

Island accommodation cannot be called the most common, but it also has a right to exist. It involves placing a wood-burning fireplace in the middle of the room. If this option seems wild, remember foreign films - in other countries, people even put sofas in the middle of the room, while we place them close to the nearest walls.

The most advanced option is a frameless wood-burning fireplace with a chimney hanging over it, surrounded by sofas and armchairs. This accommodation option looks extremely luxurious and is relevant for wealthy households with advanced repairs.

The best outdoor electric fireplaces

Floor models are stationary and mobile. Depending on mobility, they are installed in the central part of the room, or they change their location at their discretion. The latest fashion trend has become corner electric fireplaces, which look great in large rooms, and will also be a great source of warmth and aesthetic pleasure in small, small-sized apartments.

Electrolux EFP/C-1000RC

Rating: 4.9

The outdoor fireplace of a closed type has overall dimensions: 59.3 * 63.6 * 29 cm. The body is made of MDF with a black film. It not only creates a cozy atmosphere, but is also able to maintain the required air temperature in the room up to 20 square meters. m. For this, there are two heating modes with powers of 900 and 1800 watts.Moreover, the decorative function can work separately from the practical one or simultaneously.

The realism of the hearth is created by the Real Fire bonfire simulation system. The fireplace is energy efficient. When operating in decorative mode, the power consumption is only 55 watts. Turning on and adjustment is done manually, the remote control is not provided.

Firewood models, hand-painted, act as fuel, which makes the hearth even more realistic. The package includes a module for corner installation, which makes the model very attractive and versatile. Due to its compact dimensions and the ability to install along walls or in a corner, it can be rearranged at any time and place as desired.

Advantages

• very accurate imitation of a fire;
• linear or angular installation;
• built-in thermostat;
• 2 heating power;
• concise design;
• affordable price.

Dimplex Nyman

Rating: 4.9

Further in the rating, we include a retro-style electric fireplace, which will take its rightful place in the living room or bedroom.

Interesting exterior design is sure to attract attention. It is made of MDF with rounded corners.

Behind the durable glass is a hearth, as close as possible to natural.

live fire effect created using the Optiflame system. You can admire the flame or turn on the heating function separately from each other. The increase in air temperature occurs in 2 modes: full at 2 kW and half at 1 kW. The control panel is located on the body, hidden from view.

Buyers noted that the hearth looks very realistic. Many liked the design of the model, which can be combined with various interior solutions.The compact dimensions and light weight were especially highlighted, thanks to which the electric fireplace can be moved from place to place or transported to the country house. Users and experts gave Dimplex Nyman the highest marks.

Advantages

• stylish retro design;
• light weight - 15.7 kg;
• large heating area - 25 sq. m;
• complete illusion of living fire;
• mobility.

RealFlame Pluton

Rating: 4.7

The compact electric fireplace is ideal for small spaces. Made of steel, it looks like a rare exhibit and looks very stylish and expensive. Projection fire simulation technology recreates a realistic picture as accurately as possible. The complete illusion of the hearth and the low cost were the decisive arguments in selecting this model for our rating. The heating power is set in 2 modes and works independently of the decorative system.

The control panel is located on the case, it is an open type. You can adjust the brightness of the flame as you wish. In case of overheating or involuntary surges in electricity, the fireplace is turned off automatically.

According to reviews, many buyers opted for this model, thanks to an interesting design, as close as possible to a real hearth, fast heating of the room, mobility, light weight (10 kg).

Advantages

• flame realism;
• economical energy consumption;
• protective function against overheating;
• 2 power adjustments;
• offline decorative mode;
• steel case;
• budget price.

How to choose a long burning stove

For the right choice of a fireplace stove for heating a country house, it is desirable to have a clear idea of ​​\u200b\u200bits structure and principle of operation.This will save purchase costs and avoid errors during operation.

Design features

Gas-dynamic processes occurring in the furnace of a fireplace stove with a high level of efficiency depend on many parameters. It is hardly possible to independently achieve an optimal design based on clay and fireclay bricks. It is better to give preference to factory developments that have passed the design stage and repeated tests in a variety of operating modes. They are a ready-made technical device that simply needs to be correctly installed in place and operated in accordance with the manufacturer's recommendations.

For the installation of a fireplace stove, it is not necessary to specially prepare a foundation or a niche made of brick or stone. The device is mounted in compliance with fire safety rules in a free place and pipes are connected to it to remove flue gases.

The fireplace itself is a solid case with the necessary devices installed inside it. Doors are usually made of heat-resistant glass. It is blown with secondary air directed to the afterburner of exhaust gases, which prevents the deposition of soot.

The device and scheme of operation of the long-burning furnace.

Applicable materials

In the manufacture of the main elements of fireplace stoves, cast iron is often used. It easily tolerates numerous heating and cooling cycles. Such material is almost not subject to corrosion. He needs a little more time to warm up, but he keeps the high temperature longer.

Cast iron stove.

High-temperature steel grades are considered a worthy alternative to cast iron.Some manufacturers actively use stainless steel. Steel products weigh less and are easier to manufacture.

Steel stove-fireplace.

With prolonged contact with open fire, there is a possibility of their loss of strength characteristics and burnout, therefore, the bodies of high-quality steel fireplaces are usually protected from the inside by a lining.

For this apply:

• fireclay tiles or bricks;
• refractory clay mixtures;
• special compositions based on fireclay clay in combination with aluminum and titanium;
• protective materials from vermiculite;
• cast iron inserts.

The device of the furnace-fireplace with lining from vermiculite.

For exterior design of metal fireplaces often use:

• ceramic tiles;
• decorative rock;
• iron casting;
• heat-resistant enamels.

In which case is it advisable to use a fireplace stove with a water jacket

In the absence of alternative heating sources for a large house, a conventional fireplace stove will not be able to maintain a normal temperature in all rooms. Thermal radiation is not able to penetrate walls and partitions. In such a situation, it is better to purchase a model with a water or air "jacket". On their basis, it is possible to create a heating system for each room by adjusting the circulation scheme of the liquid heat carrier or by organizing the supply of convective air flows through special air ducts.

The device of the heating system of the stove-fireplace with a water circuit.

How not to make a mistake with the power of the chosen model

The general rule for calculating the required amount of heat to heat a well-insulated building is also applicable to long-burning stoves. In general, for every 10 m2 of heated premises, 1 kW of thermal energy is required.

Most fireplaces without a water circuit develop power from 4 to 12 kW.This is quite enough to heat a small country house or cottage with a total area of ​​​​up to 150 sq.m.

Fireplace stoves with a water jacket often reach a power of 25 kW. The manufacturer usually indicates how much of it is released in the form of thermal radiation and how much energy is given to the water. These data must be taken into account when choosing a room for installing a fireplace and designing a coolant circulation scheme.

If you have mastered the theoretical part of the information presented here without any problems, then you can consider yourself ready to choose a specific model.

Technological design of wood-burning fireplaces for the home

The high-tech interior is replete with modern materials, and wood-burning fireplaces are no exception. They can be made from a combination of metal, glass, chrome, ceramics. The traditional option is a wood-burning fireplace for the home, made of polished or sometimes textured steel, decorated with chrome accessories. In this case, the shape can be almost any, there are oval, elongated, rectangular and round specimens. The design of the front glass door usually resembles a plasma TV screen - large, often elongated in width to give the best view of the play of flames.

Living room in modern style with a beautiful wood-burning fireplace

You can often find models in which three walls are made of glass, and only the back remains closed. With the help of such a move, live fire is much better visible. There are also options in which two walls parallel to each other remain transparent, and the wood-burning fireplace for the house is built into the interior partition.

The fireplace not only warms you, but also gives a feeling of comfort to your interior.

Electric fireplaces without fire

Electric hearths are of two types: decorative and heating-decorative. The latter not only create an atmosphere of comfort, but also heat the room. At the same time, electric fireplaces are completely safe, they do not require either fuel or a chimney. Electric fireplaces start working immediately after plugging into a power outlet. In addition, such a hearth favors the microclimate of the room - a steam generator is built into the design of the hearth (it is filled with ordinary water), which imitates the effect of combustion and smoke, and also humidifies the air. The flame effect is created by special light filters and halogen lamps built into fireplaces.

5 Keddy

The Swedish manufacturer Keddy has been producing stoves and fireplaces for almost 50 years, which are very popular with consumers and are represented by a wide range of models, so it is possible to choose the most suitable option. The company pays special attention to the level of assembly of products, therefore, only high-quality cast iron and refractory glass-ceramics are used in production, and compliance control is carried out at each stage of assembly. Wood-burning fireplaces are presented in various design styles, from classic to modern modern, thanks to which they will perfectly fit into any interior of a house or cottage.

Cast iron furnaces of this manufacturer are distinguished by high efficiency rates, which reach 80-84%, and can act as the main heating of the room. This is greatly facilitated by the function of secondary afterburning, which allows you to increase thermal energy with minimal fuel consumption.Also, thanks to the unique interior decoration using Olivi stone, fireplaces can not only maintain a long burning process, but also retain heat after fading for 15 hours. When using Keddy stoves, there is no draft effect, due to the fact that the air enters the furnace not from the room, but from the street, after being preheated by combustion products. An additional advantage of the fireplaces of this company is a ten-year warranty, which indicates their reliability and durability.

Furnace arrangement

In order for the fireplace to perform a heating function, it is equipped with a firebox closed with heat-resistant glass (glass-ceramics). In this case, we see and hear the fire, and the efficiency reaches 80-90%. In addition, the power of a closed fireplace reaches 25 kW, that is, such a system is capable of heating 250 m². And it becomes possible to regulate the level of the flame with the help of a damper.

• It is necessary to continuously monitor and maintain the fireplace, monitor the performance of the chimney. Improper operation of the smoke exhaust system with a lack of draft can lead to the fact that smoke and combustion products will enter the room, which will cause an increase in the concentration of carbon monoxide. And this can lead to a deterioration in a person’s well-being and even to severe poisoning or death.
• Fire hazard. Before starting construction, it is necessary to carefully develop a project and, first of all, choose the location of a wood-burning fireplace. The best option is a load-bearing wall or the corner of the intersection of two load-bearing walls, which should be made of fireproof materials, thermally insulated with mineral wool covered with foil.Such a “sandwich” does not burn, does not melt, and does not emit toxic substances when heated strongly. It is impossible for communications to pass in the wall next to the fireplace.

Outcome

Educational materials on the topic of self-manufacturing a fireplace from materials appropriate to the technology are popular on the network. With masterful skill, the user creates a design, but without experience, a successful result becomes unlikely. In addition, if construction technologies are violated, the owner of the dwelling risks endangering the lives of the residents of the house and his own. In order to avoid the risk to life and waste of money on building materials, it is recommended for an owner without experience in construction to purchase a ready-made fireplace stove.

The design of the furnace is made of materials designed to exist in conditions of high temperatures. The fittings of such devices also meet the requirements of fire resistance. In addition, the ventilation architecture inside the apparatus is designed for long-term fuel combustion.

The fireplace is mounted on specialized fasteners (except for non-standard models), preliminary arrangement for the unit is not required. For installation, it is recommended to invite specialists if the store did not provide them upon purchase.

Before choosing a specific instance, it is recommended to calculate the area of ​​\u200b\u200bthe house and the required temperature level. This is necessary to calculate fuel costs and select a model with a chamber of the appropriate volume.