10 Unconventional Ways to Use an Old Toothbrush

Toothbrush application

Old toothbrushes that have come into circulation use:

For cleaning grout between wall and floor tiles. For this purpose, cut off the top with bristles.They drill holes in the middle for an electric drill drill and quickly remove all dirt and build-up in tile joints and in corners with a home-made cleaning machine. When washing the soles of shoes. The bristle will get all the dirt from the relief surface. And if you clean the white side surfaces of sneakers and sneakers with toothpaste, there will be no trace of dirt left. For washing narrow bottles from the inside. For removing dust and traces of liquid spills and crumbs between the keyboard buttons. Together with anti-stain agents, it will cope with dirt on the carpet and rug. For removing fresh stains from clothes

Place a drop of detergent to the contaminated area and rub gently with a brush. Do the same with a stain on upholstered furniture.

For cleaning complex surfaces. When washing the mosquito net, the net is installed in the bath, watered from above from the shower and washed, removing twigs, dried insects, and dirt from the cells with a toothbrush. To remove dust from the blinds, a simple tool is useful. 2 old brushes are fastened together with adhesive tape with bristles opposite each other and run along the strips of the blinds, capturing the top and bottom. Bicycle chains are cleaned in the same way. When washing small tea strainers, nets in juicers. For cleaning small parts, e.g. handles on gas stove and kitchen furniture. For cleaning the inside of electric kettles, hard-to-reach places in appliances. When washing the aquarium, the bristles will wash both the tank walls and decorative elements (stones, sunken ships, castles). When cleaning a comb from hair. When cleaning young potatoes from skin and corn from hairs. When cleaning soft parts from dust (headphone membrane). For cleaning gold and silver jewelry and bijouterie.Jewelry is placed in a glass of water, where a few drops of detergent and 1-2 drops of ammonia were previously placed. Leave for 20-30 min. Then, under running water, clean the surface with a toothbrush. To comb the long hair of dogs. For children's drawing. For various crafts with children. For cleaning car interiors. For washing and cleaning taps and shower heads from limescale. For the manufacture of wobblers. Watch a very useful video on what to do with old toothbrushes.

Attention!

A heated, 90-degree angled brush is used to scrub under the toilet rim.

beauty application

Old toothbrushes:

• apply dye to the hair;
• apply a hair styling product to the hair;
• apply cosmetic oil to the lips and massage with a brush with light movements;
• a mixture of soda and salt is applied to the steamed face and massaged, removing the stratum corneum and black dots;
• lubricate eyebrows and eyelashes with castor oil for care;
• color eyebrows or apply gel to give shape;
• clean their hands and nails after working in the garden. It is better to use a solution of citric acid, taking a few crystals and dissolve in 1 tbsp. This composition will wash off all the dirt that has eaten into the skin;
• remove pieces of mascara from the eyelashes.

Making jewelry (bracelets)

To make bright bracelets for the summer, brushes with bright transparent handles are used. In addition to brushes, you will need a pot of boiling water, a towel, and tongs. Manufacturing process:

1. Pull out all the bristles from the brushes.
2. For 1 min, they are dipped in boiling water, taken out, wrapped in a towel and bent over the arm.If it is not immediately possible to give the product the necessary shape, then one or the other ends are dipped in boiling water for a few seconds.
3. If a twisted decoration is required, then after being taken out of the water, the product is twisted around its axis.

Is disinfection necessary?

As a rule, washing with plain water and soap is enough to prevent the growth of microorganisms on the toothbrush. Nevertheless, there are various disinfectants on sale, the manufacturers of which promise to get rid of E. coli, streptococci, herpes viruses and other dangerous inhabitants of the microcosm. The operation of these devices is based on ultraviolet radiation, and for complete sterilization it takes only 5-10 minutes.

Many people consider the purchase of such a device justified. Unfortunately, it is not. Ultraviolet is not capable of killing all pathogenic microflora within such a short time. Moreover, not all bacteria and viruses are so susceptible to it that they die from a small dose of radiation.

A toothbrush is not a surgical instrument, and there is no need for it to be sterile. According to the standard, it allows the presence of 1000 CFU (colony-forming bacteria) per 1 cubic centimeter (for comparison, tap water has this figure should not exceed 50 cfu).

Additional disinfection may be needed only during illness, when there is a risk of re-infection (for example, with tonsillitis, bronchitis, stomatitis, herpetic rashes on the lip).

In this case, processing can be done in two ways:

• Soak the brush in miramistin or chlorhexidine for 5-10 minutes, then wash with soap and water under running water.
• Boil for 15 minutes (it should be noted that not every plastic is able to withstand such an "execution", so the bristles may lose their elasticity).

After recovery, the old brush should be disposed of immediately.

It is necessary to take care of toothbrushes, but there is nothing complicated about it. The main procedure that will have to be performed before and after each brushing of teeth is washing with laundry soap. It takes no more than a minute, but it helps to maintain hygiene and not be at risk of infectious diseases.

• How old toothbrushes can be useful in everyday life

Toothbrushes should be changed every 2-3 months, and sometimes even more often. But where to put the used brush? Many people just throw it away. However, you should not immediately resort to such measures, because you can find another use for an old toothbrush. In this compilation, you will be able to see the most useful tips for using an old toothbrush, and you will be surprised how many options there are and how much more benefit it can bring to you.

1. Removing pencil marks from the walls.

Apply to pencil marks shaving foam and start scrubbing with your toothbrush. It's amazing how such traces disappear.

2. Cleaning the cutting board.

Stubborn food remains can also be removed from the cutting board with a brush. It penetrates deep and cleans well.

3. Nail cleaning.

Clean the dirt under your nails with a regular toothbrush. It is better to apply a little liquid soap to the brush, and after cleaning the nails will shine.

4. Cleaning the sole.

Sometimes the mud sticks strongly to the soles, especially when it has dried. This problem can be corrected with a toothbrush (preferably hard).

5. Removing stains on the floor.

Apply toothpaste (preferably with a whitening effect) to the floor and brush the dirt from and between the tiles.

6. Cleaning the walls in the bathroom, kitchen and toilet.

Mix the cleaner, baking soda, and water in a 1:2:2 ratio, respectively, and start brushing the dirt on the tiles and in the gaps between them.

Many housewives already know that you can gently apply hair dye with a toothbrush.

8. Cleaning kitchen utensils.

With a toothbrush, you can clean pots and pans, and because the brush gets into hard-to-reach places, it can clean microwave ovens, coffee machines, toasters, kettles, and more.

9. Cleaning the faucet and shower.

The brush easily reaches the most inaccessible places, so it can clean faucets with any shape, as well as showers and sinks. White vinegar will make the job easier.

Get rid of hair stuck on the comb with a regular toothbrush.

11. For children's creativity.

Using a toothbrush, you can add many different textures, not only in drawing, but also in modeling. Children will love to draw patterns with a toothbrush and use it to make different textures on plasticine.

12. Jewelry cleaning.

Many girls and women like to wear bracelets and rings with intricate patterns, between which over time dirt accumulates. The toothbrush is able to get into all the curves and holes, thereby cleaning your favorite items.

To prevent the hair dryer grate from becoming clogged and the hair dryer from emitting an unpleasant odor, clean it with a brush.

14. Keyboard cleaning.

The keyboard is quite difficult to clean - a lot of keys and gaps between them. Use a dry toothbrush to clean any dirt, dust, hair, coffee stains, and food leftovers from your keyboard.

15. Cleaning the aquarium.

No need to buy an expensive brush designed specifically for cleaning aquariums.Use an old toothbrush - it will also help clean shells, artificial corals and other decorations in the aquarium.

16. Cleaning blinds and mosquito screens.

It's amazing how useful a toothbrush can be when it comes to cleaning blinds. Just run over each part, periodically washing off the dust, and you're done. Also for cleaning the blinds, a nozzle with a brush from a vacuum cleaner is also suitable.

17. Cleaning bicycle chains.

When caring for your bike, do not forget to clean the chains, especially the inside. The brush easily penetrates between the chain parts and cleans them of dirt, thereby preventing rust.

18. Car cleaning.

We are not talking about the body of the car, but about its interior. With a toothbrush, you can clean the seats, handbrake, cup holders, dashboard and more.

Did you know that toys (especially soft toys) are a heaven for dust and dirt? You can clean toys with a toothbrush.

Original brush storage solutions

You can store toothbrushes not only in a cup or container. If you show imagination and ingenuity, you will find interesting and profitable solutions. Storage for hygiene products can be made from any material at hand: an old towel, hooks, magnetic tape, clothespins and even sprat boxes. One has only to give free rein to his imagination, and you can realize any decisions. It is necessary to take into account the basic requirements for such a "storage":

1. the container for storing brushes should be easy to clean;
2. be resistant to moisture and not succumb to the formation of mold;
3. the accessory should be convenient and easy to use so that no one gets hurt on the decor elements;
4. perform the function of protecting the brushes from contact with each other and the environment.

For a child

Small children often do not like to wash and brush their teeth, they are naughty, cry and refuse. If you choose the right brush holder for your baby, you can turn this activity into an exciting journey and an entertaining game. The child will look forward to the onset of morning and evening to go to the bathroom.

Children are very fond of space aliens, interplanetary ships and the conquest of alien galaxies. You can take an old cup for hygiene products, arm yourself with bright acrylic paints and, together with your child, turn a boring holder into an intergalactic vessel. Draw stars and planets, attach unusual stickers, and let your brushes be passengers on this ship.

For little princesses there is another option. Take an image of your favorite cartoon character, print it out on a printer, stick it on a cup and secure it with tape on top. Seeing his idol every morning, the baby will be more willing to brush his teeth.

You can also buy special protective caps in the store, which are made in the shape of animal heads or soccer balls. They are easy to clean and handle, and young explorers can play with them in the bathroom while brushing their teeth.

What can be done with old toothbrushes

You can make bag hooks out of old toothbrushes. For this:

• heat the handle with a gas burner;
• bend at the right angle;
• bite off the head with bristles;
• irregularities are straightened by heating the cut point with a gas burner;
• drill a hole for fixing on the wall;
• fixed on the wall of the garage, barn, basement and used for its intended purpose.

If the handles on small tools (needle files) have become unusable, they are made from toothbrush handles. Manufacturing steps:

1. Bite off the head with bristles from a used old brush.
2. Clean the edge of burrs.
3. Drill a hole in the middle.
4. Insert the tool, fix with glue.

Attention! Handles for crochet hooks are made in a similar way. Human imagination knows no bounds and there are many more ways to use toothbrushes.

Misuse of this hygiene item replaces expensive hair coloring and facial treatments, develops the imagination of babies, extends the life of favorite tools, making it possible to save

Human imagination knows no bounds and there are many more ways to use toothbrushes. Using this hygiene item for other purposes replaces expensive hair coloring and facial treatments, develops the imagination of kids, prolongs the life of favorite tools, making it possible to save money.

Ventilation

Ventilation compartments accumulate a lot of dirt, dust and fungus, so they need to be cleaned on time. We are talking not only about ventilation in the room, but also about air ducts in cars.

1. Remove the protective grille and clean the visible parts of the ventilation structure with a dry brush.
2. Wipe the treated surfaces with a damp towel.
3. At the final stage, treat the surface of the structure with a foam antiseptic that protects against fungal and lime deposits.

If you need to adhere to a special slope, then make it easier for yourself: hold the part of the handle located closer to the plate with bristles over a candle or lighter for 4-6 seconds, then bend the material at an angle convenient for you, and wait for the structure to cool.

You can also remove dust and dirt from other similar surfaces: hoods, mosquito screens, air conditioner filters and other household appliances that require delicate cleaning.

Direct purpose - cleaning

The main task of a toothbrush is, of course, cleansing. seams between bathroom tiles room or in the kitchen are often clogged with dirt, it is not always possible to clean it manually without additional tools. To do this, cut off the head with bristles and insert into the drill. In this simple way, you will achieve better friction, which will help get rid of dirt and soot. If desired, you can put a little detergent on the brush. The result will pleasantly surprise you!

Computer keyboards often suffer from the touch of our dirty fingers, dust and crumbs left over from snacking at the desktop. The subject of hygiene under consideration is also capable of this type of pollution, since a rag may be useless here.

You can also use cleaning brush very narrow holes without special tools. A budget option that is suitable for cleaning keyboards, which were mentioned above, for blinds, water faucets and many other things in everyday life.

The good old version, familiar to many! A toothbrush and some toothpaste will make your sneakers look as white as when you bought them.

The bicycle chain must be cleaned regularly - use for this purpose a toothbrush. Its bristles do an excellent job of removing dirt. You can connect two brushes, as shown in the photo, to improve the result and speed up the cleansing process.

The toothbrush can be bent if the intended fold is slightly heated. lighter or match. This will make it easier and more convenient to clean narrow and curved surfaces. Just be careful with the fire and make sure the brush doesn't melt on the bend.

Smooth armpits without shaving: ways to remove hair with conventional products

Sometimes we wear a bra incorrectly: ways that are harmful to health

When toothpaste is harmful to children: acceptable age doses

This affordable and cheap option for tidying up the internal space of computers and laptops will appeal to programmers and those who can clean their own computers.

Do-it-yourself wobbler

This idea will be appreciated by those anglers who are able to enjoy not only spinning fishing, but also the process of creating bait with their own hands. To create a homemade wobbler from old toothbrush at home you will need:

• Long nail;
• Lighter;
• Pliers with ends with a rounded section (or round nose pliers);
• Stationery knife;
• Wire or metal clip;
• Fishing clockwork rings;
• Triple or double hooks;
• Glue.

Manufacturing steps:

1. A segment of the desired size is cut from the handle of the toothbrush using a clerical knife;
2. The edges of the figure are melted with a lighter flame to form a certain shape. At the same time, it is necessary to cut out the blade of the future wobbler in front;
3. A long nail is heated over a flame and inserted into the plastic along the length;
4. Forceps create loops in front (for fixing the fishing line) and behind (for attaching the tee);
5. In the center of the segment, a hole is also made with a red-hot nail in the direction from bottom to top to insert the fastener loop of the tee;
6. With the help of glue, the areas where the loops come out are fixed;
7. The final stage is the equipment of the finished wobbler with the tees and fishing rings themselves.

There is another method for creating a homemade wobbler from a brush. Required materials and tools:

• Unnecessary toothbrush;
• Hacksaw;
• Pliers with ends with a rounded section (or round nose pliers);
• File;
• Thin plastic sheet;
• Metal wire (preferably steel);
• Sandpaper;
• Fishing hooks and rings.

First you need to cut the workpiece of the desired size, giving the necessary shape to the product with a file, and adjusting the surface with sandpaper. Then a longitudinal incision is made in the workpiece from the side of the abdominal part, after which you can proceed to the manufacture of the frame. A piece of the required length is cut out of the wire to make three loops: for the front, middle and back. The resulting frame is inserted into the longitudinal section, and the seam is sealed with glue.

In the bow of the craft, a cut is made with a hacksaw for the blade of the product, which is obtained from a plastic sheet. The resulting blade is inserted into the cut, the insertion area is also sealed with superglue. At the end, the wobbler should again be equipped: with tees and rings.

Even though the bristles are worn out, it is useful to know what kind of devices you can make with your own hands from old toothbrushes. Products can be given a second rich life by using them in everyday life for cleaning furniture, as well as as assistants in creativity or hobbies. Below in the video you can see some useful and ingenious life hacks.

Similar posts

• Read
• Read
• Read
• Read
• Read
• Read

Brush Selection Methods

Usually toothbrushes are purchased in modern perfume shops or pharmacies. Many when choosing look on the price and appearance and are guided only by them, but these are by no means the main indicators

For what worth paying attention, how to choose?

The first factor to take a close look at is the material used to make the bristles. There is an opinion that natural bristles are the best option. But this is far from true. It collects bacteria that leads to diseases of the mouth. Artificial is best: it has harder fibers, and the tips do not scratch the enamel, destroying it.

Information about the stiffness of the bristles is written on the packaging or on the brush itself. According to the degree of hardness of the brushes are

1. Very soft. Recommended for the smallest or those with extremely sensitive teeth.
2. Soft. Designed for older children 6-13 years old, recommended for adults with oral health problems
3. Medium. Good for teenagers.
4. Rigid. These brushes are used by adults with absolutely healthy teeth. Before use, it is recommended to consult a dentist, otherwise there is a risk of damage to the gums and enamel.

How to store and how not to store?

1. Keep products only in a dry and ventilated place. A cabinet in the bathroom is not suitable for this, as it has high humidity, high temperature and lack of natural light. These conditions are favorable for the reproduction of pathogenic microflora.
2. For a dental appliance for cleaning, it is best to allocate a separate cup. Just do not store several products in it at once.
3. After suffering a cold or SARS, you need to change or thoroughly disinfect the dental appliance.For these purposes, special devices are suitable, for example, a sterilizer for such products. Thanks to him, you can sterilize the device effectively and quickly at home.
4. The container where the product is stored must always be clean.
5. Once every 3 days, you need to disinfect the device with an antibacterial rinse or special solutions that can disinfect the bristles.
6. Store the product only with the head up. Thus, the hairs will dry quickly, microbes will not multiply, as a result of which the device will not turn black and will not deteriorate so quickly.
7. Flies and other insects should not sit on the surface of the brush, as they can act as carriers of the disease.
8. As a reserve, you need to take care of a special case in which you can store the product while traveling.

The fact is that over time, the hairs will become soft and will no longer be able to fully perform their functions.

brushing teeth with water

An irrigator is a device that cleans the mouth with water.
under pressure. According to Golub, this is a very good device, but still it is not
replaces toothbrush and dental floss. The tip may have different
nozzles - a single jet under pressure cleans out food residues, pulsating or with
microbubbles enhances the effect. There is a special nozzle for the tongue, with its
help reduce the amount of microflora, which eliminates the cause of unpleasant
smell.

For hygiene, plain water is used, if added to
irrigator antiseptic, then the procedure becomes therapeutic. It is used when
gingivitis and periodontitis, when the solution washes out toxins, bacteria, pus,
reduce the amount of microflora on tissues.

The irrigator is good to use in the presence of various orthodontic
constructions, bridges, implant processing - better rinsing provides
prevention of complications.

“This is a good means of preventing inflammatory
diseases in women during pregnancy. Hormones occur in the body
changes that contribute to the accumulation of a special type of pathogenic flora, which
can cause gingivitis, it's called pregnancy gingivitis. Using
irrigator, you can reduce this risk. Some pregnant women have
aversion to toothbrush odor - in this case, irrigators are a big
help,” says the dentist.

But the device is not needed for children under six years old - a child
will not be able to adjust the power of the jet, will get scared and get negative
impression.

What are electric toothbrushes

Brushes on "electric traction" are classic, sonic and ultrasonic. All require a power source (accumulator, AA batteries). At the same time, electric toothbrushes differ in the way they clean their teeth.

Directions of rotation of mechanical type brush heads: in a circle or up and down. There are brushes whose bristles rotate and sweep at the same time. And in the most advanced models, simultaneous rotational and pulsating movements are provided. The efficiency of such brushes is achieved by loosening plaque. Therefore, by the way, they clean off solid deposits better than their “competitors”.

• The maximum frequency of movements of the bristles per minute of any classic electric brush is 10 thousand revolutions.
• Sound models are equipped with a generator, thanks to which electricity becomes sound vibrational waves. The bristles in these models oscillate with great scope and speed - up to about 35 thousand movements per minute.Thanks to sound vibrations, microflora is also removed from the surface of the teeth.
• The vibration frequency of ultrasonic models is even higher. The handle contains a generator capable of converting electricity into ultrasound. It causes the bristles to make up to 200 million directional movements per minute. Under the action of ultrasound, solid deposits are destroyed. At the same time, the places covered by the gums are cleaned. Moreover, such brushes get rid of pigment plaque and bacteria. When brushing teeth, the temperature in the oral cavity increases, due to which the penetration of toothpaste components improves and blood circulation in the gums increases.

Progress does not stand still. Today you can find brushes that have a strip of titanium dioxide installed inside. It releases negative ions. Thanks to them, the components of the toothpaste have a better effect on the enamel, and the oral cavity is also disinfected. However, dentists consider the appearance of ionic brushes on the market just a publicity stunt.

Kitchen stove

The stove must be kept clean at all times, so it must be washed regularly. If during the cooking process oil and fatty mixtures or food residues get on the stove, then it will be problematic to remove the dirt. Not necessary use chemicals and hard sponges that can scratch the surface of the plate. All you need for a gentle, but at the same time high-quality cleansing is: baking soda, vinegar and a regular toothbrush with medium bristles:

1. Wet the surface of the stove and cover it with a thin layer of baking soda.
2. With a brush, start exfoliating stubborn stains and if they are difficult to remove, then use a spray bottle to spray vinegar, pre-mixed with water in a ratio of 1 to 1.
3. At the end of the procedure, wipe the stove first with a damp and then with a dry cloth.

In addition to the stove, with a brush you can easily clean any kitchen utensils: strainers, graters, spare parts from a meat grinder and bread machine, narrow necks of bottles or cans. Thanks to a few movements, the dishes will look neat, getting rid of food debris and bacteria.

What characteristics of an electric brush should be taken into account

Before buying a brush, it is necessary to consult a dentist, as the condition of the teeth and gums determines the requirements for the properties of the passing model.

Stubble

The bristle must be from synthetic materialssuch as nylon. Natural hairs may have hollow parts where bacteria can accumulate over time. The stiffness of the bristles is selected by the doctor individually. Without his recommendation, you should not use brushes with hard bristles. Soft and very soft bristles are recommended for patients with sensitive enamel and gum problems, as well as for children. The rest is suitable bristles of medium hardness

Particular attention should be paid to the tips of the villi. For more delicate care, they are made rounded.

Sharp-edged bristles can scratch tooth enamel.

Accumulator or batteries

Battery-powered electric toothbrushes lose power as they run out of power. Therefore, the effectiveness of this tool may gradually decrease.In addition, buying it, the user also acquires the need to constantly spend money on batteries. The battery makes it possible to control the charge level before each cleaning and does not require additional costs.

Handle and weight

The handle is better to choose a curved shape from non-slip materials. The weight of the device should not strain the hand for 3-5 minutes spent on cleaning the entire oral cavity

It is especially worth paying attention to these characteristics when choosing a brush for children.

Number of nozzles

Several interchangeable brush heads allow you to use one electric toothbrush for all family members. For example, buying a set of Glister Smart Sonic electric toothbrushes and spare brush heads is more profitable than buying several separate accessories for the whole family.

Noise

Vibrations of electric brushes do not make loud sounds. But those with sensitive hearing may experience discomfort from even a slight buzz. In this case, it is worth opting for silent ultrasonic models.

Additional functions

The latest models of electric toothbrushes are supplemented with features that allow you to improve the process of brushing your teeth. The most common among them:

• a timer that beeps when it's time to move on to the next zone in the mouth;
• pressure sensor that warns when to reduce the pressure on the cleaning head;
• compatibility with a mobile application that allows you to evaluate the result of the procedure and configure the device's operating mode.

This application was created for the Glister Smart Sonic electric toothbrush. It:

offers one of five modes of operation depending on the condition of the teeth and eating habits;
marks the time of cleaning;
shows which area needs special attention.

Useful used toothbrush

16. Cleaning blinds and mosquito screens.

It's amazing how useful a toothbrush can be when it comes to cleaning blinds. Just run over each part, periodically washing off the dust, and you're done. Also for cleaning the blinds, a nozzle with a brush from a vacuum cleaner is also suitable.

17. Cleaning bicycle chains.

When caring for your bike, do not forget to clean the chains, especially the inside. The brush easily penetrates between the chain parts and cleans them of dirt, thereby preventing rust.

18. Car cleaning.

We are not talking about the body of the car, but about its interior. With a toothbrush, you can clean the seats, handbrake, cup holders, dashboard and more.

19. Cleaning toys.

Did you know that toys (especially soft toys) are a heaven for dust and dirt? You can clean toys with a toothbrush.

20. Get rid of stains on clothes.

Apply stain remover to the stain and gently scrub the area with a toothbrush. Learn about the different ways to remove stains in our article: How to remove stains at home.

Classic and ergonomic

How else are conventional manual toothbrushes different? The number of rows with tufts, the shape and length of the bristles, the angle of the tufts. Rows can be from three to five, the bristles are evenly trimmed or pointed. In this case, the length may be different on one brush. For example, in orthodontic toothbrushes, the middle rows are trimmed
in short, which is convenient when wearing devices.

There are also innovative solutions combined with the classics. One of the companies has patented color
bristles - the paint is gradually washed out of the fibers, and when half remains -
This is a signal that it's time to change the brush. Myths about teeth and dentists: why you can eat chocolate

“The design of the handle is also different. Some use the historical view
- a head with bristles is attached to the straight handle. Others - working head at an angle
to the handle, which is more ergonomic and creates better conditions for the work of the carpal
joint during cleaning, when we make return, circular and
sweeping movements. Also, springs are inserted between the head and the brush,
which regulate the pressure on the working part to avoid damage
gum tissue,” Golub described the varieties of designs.

To change an ordinary brush, on his advice, should be every one to three months. it
depends on how intensively a person brushes his teeth.

Child development and creativity

Playing with improvised objects is not only fun, but also useful for children. So they learn to show imagination and ingenuity.

How to use old toothbrushes to develop creativity?

• Brush dolls. Toddlers from early childhood need to be taught to personal hygiene. Cute dolls made from old toothbrushes will help you explain the rules in a playful way. To make crafts, you will need multi-colored scraps of fabric, beads for the eyes, a needle and thread and glue. Next, you need to sew suits for the brushes. The child can also participate and glue the doll's eyes or jewelry on clothes. Toy examples:

Drawing pictures. Drawing with an old toothbrush is very easy, and the result is always interesting. To create a picture, you will need figured templates made of cardboard, a sheet of white paper, and watercolors. The drawing technique is simple: you need to place templates (butterflies, stars, hearts) on paper, draw paint with a brush and run your finger over the bristles over the drawing.Small colorful splashes will fly onto the paper, and the place where the template lay will remain snow-white. Example:

Bracelets for girls. To create jewelry, toothbrushes made of transparent plastic are best suited. You need to lower the brush into boiling water and, using pliers, pull the bristles out of the softened plastic. Then you should again lower the base into boiling water, and after about 1 minute it can be bent into a bracelet. Be careful not to get burned!

Do-it-yourself glass for brushes

You can add originality and originality to your bathroom if you create a glass for storing hygiene items with your own hands. Such a glass will serve as an original and pleasant housewarming gift.

Take a handy glass jar suitable for your sink and wash it clean from the inside. Using acrylic paint and any paper stencil, apply a pattern to the surface. After drying, varnish and leave to ventilate on the balcony for two days. You can also decorate the glass with a patterned napkin and PVA glue. Cut out the pattern from the napkin, spread it on the surface of the glass and grease it well with glue. After the jar is dry, you can use it.

Another way to make a custom piece is lesser known but looks very good in any bathroom. You will need a container, thick woolen thread and good superglue. You need to work with gloves. Lubricate the entire surface with glue, and slowly wrap the container with thread. You can alternate colors and make it striped. At the end of the work, carefully hide the tip and leave the product to dry.