Overview of Kiturami diesel boilers with user reviews

turbo 13r

The model number of the boiler corresponds to the amount of heat generated per hour - 13000 kcal/hour. In terms of the usual kilowatts, the values ​​\u200b\u200bof 15.1 kW are obtained.

The declared power is enough to heat a house up to 150 m2. Naturally, one should take into account the heat costs for the preparation of hot water supply. If a significant consumption of hot water is predicted, moreover, regularly, then the heat output for the heating circuit will naturally be lower.

Reliability and balanced operation, combined with the affordable cost of the boiler, gives a clear advantage in the case of using several boilers simultaneously in one building, for example, when dividing the heating circuit for each floor separately or when covering a large area in two more wings, directions.

Possible malfunctions in the operation of the Kiturami boiler

The boiler diesel manufacturer Kiturami is of high quality and long service life. However, it happens that the equipment fails prematurely.This can happen if the unit is used incorrectly or its untimely service maintenance. The reason may be the use of low-quality fuel.

In order to avoid breakdowns, it is necessary to familiarize yourself with the rules for using the boiler.

They are indicated in the product data sheet. All instructions for the Kiturami diesel boiler must be carefully read before using the device.

In the presence of malfunctions, the boiler issues error codes:

• "01", "02" and "03" indicate problems in the flame detector, as a result of which ignition does not occur.
• "04" indicates that the water temperature sensor is faulty.
• "08" - either a wire break has occurred, or the route between the temperature sensor and the boiler is too long.
• "95" - the pressure in the heating circuit is very low.
• "98" - a signal that there is a lack of fuel in the supply line.

Considering the Kiturami boiler - error 01 is most common. Such a malfunction for the operation of the equipment does not pose a particular danger. The boiler needs to be restarted. To do this, press the power button of the temperature controller in the house. You also need to check if the gas supply valve is closed. If the situation has not changed and the display still shows error “01”, it is recommended to contact the service center.

In order to avoid problems in working with the Kiturami diesel boiler, it is important to remember that its proper functioning depends on following the correct installation scheme, proper settings, as well as the rules for handling the device. Observing all the requirements, adhering to the rules of operation, the unit will last a long time, will work stably without the need for repair

What can be said in conclusion?

A large number of brands and types of heating equipment makes it difficult to make the right choice. Therefore, the question is often asked - what should be considered when buying? Among liquid-fuel models there are single- and double-circuit devices, they also differ in power.

It is these parameters that should be put at the forefront. Since in private households the load on heating most often exceeds the need for hot water, it is possible to install single-circuit diesel boilers from Kiturami, spare parts and a boiler for them will have to be purchased separately.

As for the efficiency of the heating system. It depends on the accuracy of the calculation, which means that it is worth considering the size of the room and other features.

When buying a boiler, you need to take an interest in the depth of diesel fuel intake, it corresponds to the greatest possible depth to which the tank can be buried.

And, of course, you need to calculate your financial costs, taking into account not only the cost of the device, but also additional equipment, installation and maintenance.

Kiturami Turbo is a floorstanding diesel boiler made of high quality steel. Both water and antifreeze can be used as a coolant. Fuel consumption is minimal due to modern design turbocyclone burner. The Kiturami Turbo boiler has a self-diagnosis system, and information about operation and malfunctions is displayed on the room thermostat display. It is also installed in any place convenient for access and allows you to control the operation of the boiler according to the temperature of the coolant or air in the room. Hot water temperature is regulated by degree in the range from 41 °С to 75 °С. In summer, the Kiturami Turbo boiler can only be used in hot water mode.Safety during operation is ensured by the presence of sensors for monitoring temperature, overheating and lack of coolant. There is no expansion tank and circulation pump - you need to buy it separately. The boiler must be installed in a specially equipped room.

Well, my hands seem to be in place. I can always fix it, and Feroli costs like 4 pcs of kiturami. Prevention every year and everything will be a bundle. I myself have 3 diesel guns in the workshop and one oil one I repair only myself, the principle of operation is one to one. I have another question ?

how to make the boiler work via GSM. I want to start it in two hours in order to come to a warm house. Is there a solution?

How how. buy a relay block with control via SMS. look in chinese stores, I met such. plug into the boiler control socket.

Look for the exit where the control is from the THERMAL SENSOR of the room, it is responsible for starting the boiler.

Keturamah like there were analog temperature sensors. and there will be happiness in life.

Or even easier. put a thermostat on. At me on such heap of objects works.

conveniently supports at night for example +5 and at five in the morning it switches to the main mode.

Fuck you bother with JISM. unreasonable.

I would like to start a review of the Kiturami / Kiturami diesel boiler by saying that when choosing a liquid fuel boiler after 2012, when diesel fuel prices went up sharply, you will have to calculate your heating budget well.

And, maybe, if you have a small house, look, first of all, towards Kiturami 13R boilers, which are very economical.

The Kiturami 21R boiler consumes 8-9 liters of diesel fuel per day at full power.While the Kiturami 13R diesel boiler “eats” much less, its diesel fuel consumption is only 6 liters per day.

For some owners, such a difference in the consumption of diesel fuel in boilers is very significant. If we take into account that now the price of diesel fuel will exceed the price of 95 gasoline, then the amount is decent - the difference is 100-120 rubles per day - this is almost 3500 rubles per month. And for the entire heating season it can be up to 20,000 rubles.

Inside, the Kiturami Turbo diesel boiler is very simple, if not primitive - a burner, a heat exchanger and a control panel.

Solid fuel

Solid fuel boilers are suitable for use in rural areas. To obtain thermal energy, the units consume biofuels: wood and coal. It is possible to use briquetted and granulated material of various origins.

Operating features:

• availability of fuel material;
• limited time of work on one tab;
• the need to constantly manually maintain the boiler: load new portions of fuel and clean out the ash several times a day;
• the chimney and pipe are periodically clogged with soot deposits.

Solid fuel boilers are classic and pyrolysis type. In the first case, the unit has one combustion chamber.

The second option is structurally more complicated. The furnace of such a device is divided into two parts. Fuel is placed in the upper chamber and heated to pyrolysis. The wood gas produced in the process is injected through a nozzle into the lower chamber and burned there.

Pyrolysis boilers are more efficient. Another plus is their low waste.

Kiturami KF

The series is represented by the KF-35 model with a power of 24 kW. The pyrolysis type boiler is capable of heating rooms up to 240 sq. m.One full bookmark of fuel enables continuous operation of the unit during the day. Domestic water heating rate 14.7 l/min. Efficiency - 91.5%.

Design advantages:

• capacious loading chamber for 50 kg;
• stainless heat exchanger;
• a ceramic nozzle between 1 and 2 combustion zones contributes to the complete afterburning of fuel and pyrolysis gases;
• large loading hatch;
• the blower fan maintains a stable hearth in the furnace;
• the secondary combustion chamber is equipped with a device for removing pyrolytic liquid;
• ash collector in the form of a box.

Kiturami KRP

The KRP range includes pellet boilers using granulated wood waste. Granule diameter: 6–8 mm, length: 1–3 cm. A full hopper allows the equipment to work without interruption for up to 5 days. The model range consists of 2 sizes: 20A and 50A.

Technical features:

• automatic fuel supply by means of a screw mechanism;
• built-in expansion tank and circulation pump;
• ash pan in the form of a box;
• pellet burner in the form of a bowl with an increased ignition area;
• automatic vibration cleaning of the grate.

Installation and operation rules

In the presence of power surges, it is desirable to purchase a stabilizer to ensure the correct operation of the control and monitoring unit and safety from premature failure

The boilers are equipped with tanks for storing liquid fuel. These tanks can affect the performance of the equipment. It is necessary to correctly install this container, which must be set on all planes.

The tank must have a pipe for draining sediments and a fix bag. The container must be periodically emptied of fuel and cleaned; it is recommended to use only purified fuel.

Before starting the equipment, diesel fuel is initially filled into the tank, which must settle for at least half an hour. Only after that the unit is started and the operating modes are adjusted.

In the presence of power surges, it is desirable to purchase a stabilizer to ensure the correct operation of the control and monitoring unit and safety from premature failure.

To keep the boiler working you need:

• Periodic mechanical cleaning.
• Constant monitoring of equipment performance and checking of components and parts for their leakage.

Self-installation of diesel boilers is possible with a careful study of the schemes and recommendations of the manufacturer. However, there are many operations that require the presence of highly qualified specialists, so that later the equipment does not have to be repaired. Instructions for the exact order and principle of installation and the electrical installation diagram serve to illustrate the implementation of these works.

Kiturami boilers are an economical option with a long service life. The reason for the premature repair is untimely service or low-quality fuel filling.

Error codes:

• Flashing "01", "02" or "03" lights indicates a problem with the flame detector and no ignition. You will need to restart the boiler according to the instructions;
• Error "04" indicates a malfunction of the water temperature sensor and will require repair;
• Error "08" - an indication of a too long route between the boiler and the sensor or the presence of a wire break. It is necessary to carry out repair work;
• Error "95" - low pressure in the circuit. The boiler needs to be recharged and the heating system to be inspected for leakage;
• Error "96" - system overheating;
• Error "98" - lack of fuel when supplying.

Reasons for no ignition - error code "01":

• Jamming of the screw limiting the fuel level. It is necessary to replace the locking element or check the injection motor;
• Failure of the injection motor - a check of the motor's performance will be required;
• Lack of fuel supply - checking its level will be required;
• Third-party object in the screw gate;
• Photo sensor failure - it needs to be checked for operability.

Features of Kiturami boilers

Kiturami is a South Korean company with more than half a century of experience in the development and production of heating boilers and related equipment.

During this time, the company has become one of the leaders in the domestic Korean market, and has also found an extensive market in North America and nearby Asian countries. In our country, Kiturami boilers have been officially distributed for at least ten years and have already shown themselves on the good side.

The main emphasis in the promotion of boilers is on the introduction of innovative technologies and, in particular, their own developments, which have no analogues from other manufacturers or determine the narrow specifics of the equipment.

Diesel boilers, by definition, are not considered as the main model range for a wide range of applications. In terms of economic feasibility, they are inferior to gas, electric and even solid-state boilers. However, they are still in demand among consumers in view of a number of reasons why liquid fuels are becoming preferable.

In remote areas of residence, where there is no stable connection to the power grid, there is no gasification, the issue of fuel availability becomes acute. At the same time, the heating of the house should, by definition, work smoothly throughout the season. If for many countries such situations are rather an exception to the rule, then for us, on the contrary, they are commonplace, the cause of which is the vast expanses separating settlements.

Diesel fuel, unlike gas, is easier to transport and store with minimal risks to life and the environment. Unlike solid fuel boilers, when burned, diesel fuel provides uniform heating and a greater degree of control over the waste of resources. And finally, the design of the diesel boiler and in particular the burner does not limit the use of other heat sources.

With minimal changes, the diesel burner can be changed to use blue fuel, and boilers equipped with an extensive combustion chamber and grate can quickly switch to using coal, wood or pellets.

Diesel boilers Kiturami are highly technological and are a perfectly balanced equipment for the use of diesel fuel as a heat source, and at the same time they are excellent for the above types of conversion to work on gas or solid fuel. So constructive and functional flexibility is the first significant advantage.

Kiturami boilers often use their own designs and unique layouts. On the one hand, this reduces the maintainability of heating equipment, but on the other hand, it ensures the highest efficiency of the boiler and balanced operation while observing simple and transparent operating rules.

This is the second significant reason to turn your attention to diesel boilers from South Korea.

The last advantage is the cost of boiler equipment. Even taking into account the high performance and proven quality of the boilers, their cost does not exceed the average on the market among similar offers.

So it turns out that Kiturami boilers have three features: a balanced design, high efficiency and an affordable price.

Kiturami boiler device

Installation and maintenance

The diesel boiler Kiturami, no doubt, has excellent technical characteristics, but remember that when using them, you should follow certain rules, otherwise even the most reliable equipment will need major repairs.

With regard to installation, you must follow all the requirements of the manufacturer. Therefore, it is best if you entrust the installation to experienced specialists, so you protect yourself from possible equipment repairs immediately after the installation work is completed. As practice shows, malfunctions arise just because of incorrect installation. In order to avoid difficulties, you will have to pay a little extra.

The heating structure has a fuel tank, so there are also certain operating requirements for it. For example, only purified fuel can be used. In addition, the tank should be cleaned from time to time, like the boiler itself.

Because of this, at the time of purchasing the equipment, it is worth paying attention to whether the tank is equipped with a precipitation outlet pipe and a fix package

Do not forget that before you turn on the diesel heating boiler for Kiturami's private house, you need to fill it with fuel and let it stand for at least 20 minutes. Only after that you can start setting up the equipment.

Do you often experience power surges in your area? Then you should not spare money, purchase a stabilizer that will help maintain the functionality of the control unit and various sensors present in the heating structure. However, high-quality installation and proper use is not all, because the Kiturami diesel boiler requires temporary preventive measures, which include:

• mechanical cleaning;
• check all components for operability and tightness.

Some of these activities can be carried out independently, for example, to connect the device itself, but the rest would be more correct to entrust the masters. Do not forget about the timely care of the heating structure, so you protect yourself from many minor malfunctions and prevent more serious damage.

You can find out which capacity to choose for diesel fuel here

You can find out the fuel consumption of the Kiturami diesel boiler from their device data sheet. But remember that the actual consumption will depend on the settings in each individual case. Based on the actual power required to heat the house, the necessary nozzle is selected from the set offered by the manufacturer.

You can calculate the power of the boiler on the calculator directly on our website

Thermal power, fuel consumption and fuel combustion mode are set. The parameter that is indicated in the data sheet table reflects only the factory presets necessary to ensure proper performance, but subject to the use of high quality purified fuel. As a rule, this refers to diesel fuel already with winter additives, which do not allow it to become thicker, or to stand out more than the norm for paraffin.

With the correct selection of the heating mode and the installation of a controller with a variable temperature regime, for example, based on the daily time and day of the week, it is possible to reduce the consumption even more.

It is worth remembering that the Kiturami diesel boiler will work properly and for a long time only if the installation follows the correct scheme, proper settings and general rules for operating the device. If you follow all the rules and requirements, the heating equipment will last a long time and will function stably without constant repairs.

Blitz Tips

Diesel single-circuit and dual-circuit models have been developed, the latter are more convenient, but more expensive.

Choosing the first option, you need to purchase a boiler and other appliances and fixtures, but its cost will still be lower.

It is worth paying attention to the depth of the fuel intake according to the criterion for determining the deep location of the fuel and the fuel tank. According to fire safety, fuel tanks must be buried in the ground to an appropriate depth.

With low power, the depth of the fence is higher.

The cost of installing the equipment will include the price of the heater, its installation, commissioning and commissioning, maintenance and spare parts for its repair.

Strengths and weaknesses of diesel units

So, we found out that all boilers from this Korean manufacturer embody excellent quality, functionality, affordable cost and modern design. The fuel in this case can be both light oil and kerosene. If the burner is replaced, it is also possible to switch to natural gas.

Other advantages of the devices include the presence of security sensors with which you can control the main work processes. Tellingly, when creating these sensors, a unique technology was used regarding the removal of fuel combustion products.

A distinctive feature of the models of the Turbo series is that they include floor-mounted diesel heat generators that can not only heat the room, but also heat water for domestic needs. Therefore, there is no need to purchase an expensive boiler, because all models of this series already belong to boiler-type devices.

Another advantage is the high degree of protection provided by the fact that the boilers are built in:

• sensors;
• forced removal of flue gases;
• control bullets;
• thermostat.

The common advantages of all boilers of this manufacturer include the fact that they are quite capable of functioning in any conditions, and this is quite relevant for our country. And buying spare parts for Kiturami boilers is also not difficult, since the company has many dealerships.

When compared with boilers made by other manufacturers, Korean models are distinguished by one of the most economical fuel consumption. And if we talk about the productivity of hot water, then this figure can reach twenty liters per minute.

And now let's talk about the main advantage of the described boilers - this, of course, is their affordable cost. To date, Kiturami diesel boilers can be purchased for an amount of 20-30 thousand rubles. Moreover, this equipment is distinguished by the widest model range, due to which the requirements of not only the owners of country houses, but also the management of industrial facilities will be satisfied.

Fuel consumption of diesel heating boiler

We advise you to familiarize yourself with our comparative review of the fuel consumption of diesel heating boilers and how to reduce it.

Installation of Kiturami boilers

• Liquid fuel boilers are installed in a room with a temperature corresponding to the temperature of the heated room ± 10-15%;
• The room must be provided with supply and exhaust ventilation according to the standards of furnace equipment;
• It is not allowed to store building and flammable materials in the furnace;
• The floor in the boiler room must be washed. A floor is made with a slope to drain water and oil products. Sewerage must be equipped with an oil filter;
• The ceiling height in the boiler room is at least 2300 mm;
• The boiler is placed on a non-combustible platform no thinner than 50 mm. It is recommended to make a platform of brick or concrete;
• The distance from the boiler body to the walls and ceiling (niches) must be at least 600 mm;
• The expansion tank of the boiler is installed at a height of more than a meter from the top of the boiler;
• Direct water supply to the boiler is prohibited. Recommended supply from the storage tank;
• It is necessary to use a circulation pump in the system and make a drain system with a valve;
• For the electrical connection of the boiler, a separate group of electrical wiring is required, with a grounding contact protected by a circuit breaker + RCD (residual current device) or a differential circuit breaker.
• Smoke is removed from the boiler by a chimney in the shape of the letter “L”, with a bend of at least 50 cm. The slope of the pipe to the main chimney must be 5˚. The length of the chimney pipe must be at least 3 meters from the surface of the boiler.

These are the general rules for installing a Kiturami oil boiler.To install the boilers and maintain the guarantee, you need to invite specialists.

What can be said in conclusion?

A large number of brands and types of heating equipment makes it difficult to make the right choice. Therefore, the question is often asked - what should be considered when buying? Among liquid-fuel models there are single- and double-circuit devices, they also differ in power.

It is these parameters that should be put at the forefront. Since in private households the load on heating most often exceeds the need for hot water, it is possible to install single-circuit diesel boilers from Kiturami, spare parts and a boiler for them will have to be purchased separately.

As for the efficiency of the heating system. It depends on the accuracy of the calculation, which means that it is worth considering the size of the room and other features.

When buying a boiler, you need to take an interest in the depth of diesel fuel intake, it corresponds to the greatest possible depth to which the tank can be buried.

And, of course, you need to calculate your financial costs, taking into account not only the cost of the device, but also additional equipment, installation and maintenance.