DIY wooden floor clothes hanger: creative ideas + assembly instructions

Variants of wooden hangers that you can do yourself

Wall structures include two main elements - hooks and a board that serves as a base. Above, as a rule, have a shelf. In the hallway, it is used to store hats and scarves. Souvenirs, vases, other decor can be placed on it.

• One of the standard solutions is a vertical shield going down from the shelf. It is needed so that the clothes do not come into contact with the wall decoration, do not stain it and do not wash it.Its length may be small, but in some models the shield descends to the floor. This technical solution fits perfectly into the wall at the front door. It can become part of the hallway suite and successfully complement it. The shield is made of parallel rails or one panel.
• There are transformer shelves with movable hooks. They consist of parallel vertical bars. Between them are hinged hooks made of the same material as the base. They are short reclining bars, the bottom of which rests against the wall in the open state. The lower part is cut so that, when opened, its surface lies flat on the plane of the wall, which serves as a limiter for it. When folded, the hooks turn into one of the rows of bars, which differs from the neighboring ones only in its length.
• Clothes can be hung on any device suitable for this. Bottle caps, railway crutches and wide nails, working tools, such as hammers, are attached to the board. In this capacity, cutlery is used - forks and spoons are able to take on the most intricate shapes.
• One solution is to use natural natural forms. On real branches and knots growing on the trunk, clothes fit no less than on factory products. The trunk is placed horizontally.
• There is another option. The trunk with knots is cut into blanks of the same length and the trimmings are placed between the horizontal slats that replace the board. The product must be dried, sanded, impregnated with antiseptics and varnished.
• The board that serves as the base is turned to size and given the desired shape. Instead, they sometimes hang a log, an old fence polished and varnished, which recently decorated a flower bed.The shield is assembled from laths, creating a diamond-shaped repeating ornament from them. This design can be made folding.

pixabay

How to choose the perfect hanger?

Before the question how to make a hanger for clothes with your own hands, you need to ask yourself another one - how to choose the right model? The answer to it cannot be unambiguous: many factors will have to be considered.

How does Operation Hanger begin?

How to start searching for the optimal product? The hosts will have to consider several points. To a greater extent, this applies to solid, floor structures.

1. Room dimensions. The model should fit perfectly, but not become an obstacle to movement in rooms with a small area.
2. Room design. For example, for a hallway decorated in a minimalist style, bright hangers or decorated with patterns and ornaments will not work.

Small children in the family is another point to consider. This curious and very active "living factor" is not discounted when choosing any piece of furniture. But hangers are the weakest link, because during hot battles, a light product of the original form will constantly be in danger of falling.

Materials for manufacturing

If we talk about the eternal "favorite", then it is wood, the material is malleable, natural, often safe, warm and attractive. Both wall and floor hangers are made of wood. The next popular contenders are various chipboards, plywood.

Another candidate is a strong, extremely reliable metal, however, to work on the design, the master will need the skills of a welder and the appropriate equipment.For this reason, this option for self-production of hangers cannot be called the most popular, and even more so simple. There are exceptions: they can be floor products made of thin, light pipes. In this case, the craftsmen can get by with glue, corners and tees.

Improvised materials are a very large army of "helpers", so it is difficult to even list all the items that turn into original designs. This option is the most original, since it depends only on the imagination of the owners how creative their hanger will be.

Varieties of designs

The place and material of manufacture are not the only criteria, therefore, before you make a clothes hanger with your own hands, you need to choose the model that will suit all residents. Devices for placing clothes and accessories can be floor or wall. Another category, also related to hangers, is coat hangers, or trempels. There is another, unusual solution: these are hanging products.

Floor hangers

The simplest options are racks, or carob structures. They can be seen in reception rooms, in clinics, in lobbies, halls, etc. Such hangers allow you to hang clothes, umbrellas, bags, and place hats. They are not very stable, but compact and mobile.

These devices are easy to rearrange, or temporarily (for example, in summer) completely removed from the hallway. However, such hangers in houses and apartments can be seen infrequently. The reason for the dislike of the owners is their instability. Such a design can be dropped even by a moderately well-fed pet.

Hangers with rods - frame structures - a more versatile option.Such products are as stable as possible, practical, but at the same time light and do not take up much space, do not steal space even from a small room. In addition to the crossbars for hangers, models may include additional elements - shelves, small seats, etc.

wall fixtures

Their main advantage over floor "rivals" is the minimum space occupied, since the floor remains free. The support for the structure is the wall. Such hangers can be single-row and multi-row. As a rule, they provide a shelf for hats. If we compare all the models, then these designs are the most popular.

Wall hangers are often made of wood, and they are hung in corridors, bedrooms, nurseries, bathrooms, pantries, and baths. Small models are often hidden behind the door. On the wall, the products are fixed using special brackets. Fasteners are self-tapping screws with dowels, or anchor bolts.

Trempeli

These are the simplest designs that are well known to everyone. To make such a product is the easiest. The most elementary models can be built even from ordinary thick wire. The volume of metal home-made hangers is given with the help of a synthetic winterizer, covered with beautiful material.

Hanging products

The most original, non-standard solution is “floating” hangers for trempels or hooks designed for umbrellas and hats. These are simple crossbars that are attached to the ceiling with ropes, chains, cables, cords or straps.

Benefits of using plastic pipes

Various designs of PVC pipes have long been used in their projects by designers around the world.This is due to the fact that such material has a lot of positive qualities:

1. Finished products are aesthetically pleasing. Snow-white designs fit especially well into a laconic interior in a minimalist style.
2. Plastic of this type is considered environmentally friendly and does not cause any harm to health (can be used in children's rooms).
3. If any fragment of the structure cracks or deforms, then it will be easy to detach and replace it with a new part. You can install another part or a whole block at any time in order to modify the product.
4. The design does not need to be painted, but if desired, you can cover the surface with acrylic paint, decorative varnish, or even paint from a spray can.
5. Collapsible structures are easy to store on the mezzanine in the garage, and if desired, assemble - for example, when guests arrive.
6. Plastic does not deform under the influence of the sun, withstands even high temperatures.
7. The design has good strength, it is difficult to damage it.
8. Due to the existence of pipes of various diameters and accessories for them, it is possible to create a product of any size.
9. If you wish and have free time, you can make structures from plastic pipes not only for yourself, but also for sale.
10. Low cost. You don’t have to spend a lot of money to buy material.
11. Plastic pipes have good corrosion resistance and are not afraid of water.

PVC pipes do not lose their original appearance even after a while

Table 1. Types of PVC pipe hangers

Type of	Description
whole	They are fixed with strong glue, so that the design will be reliable (non-separable).
collapsible	Mounted on rubber seals.Such products will be less durable, but they can be disassembled and reassembled at any time. At the same time, travelers will especially appreciate such hangers, because the pipes are quickly assembled into a single product like a designer. The product can be transported to the country without any problems.

PVC pipe hanger on wheels

What is the name of the clothes hanger on wheels (types and photos)

Usually it is called that: a hanger on wheels. A little less often you can find another name: a dressing rack on wheels.

Wardrobe floor rack on wheels has become a constant attribute of various clothing stores. Such racks are often used in locker rooms, wardrobes and at sales exhibitions. Clothes are hung on hooks or hangers. The wheels, which are located at the bottom of the base, create additional convenience for easy and quick movement even of the hanger already loaded with things.

Depending on what material they are made of, hangers are:

metal - have a lot of weight, stability. For the manufacture of used chrome-plated aluminum, which, if desired, can be painted to any color;

Metal hanger on wheels

forged structures - unique in appearance, serve as an additional decoration for the room. Very practical and comfortable;

Forged hanger on wheels

wooden hangers - have an attractive appearance, durability. For the manufacture of various types of wood are used. Suitable for various interior styles: from classic to trendy loft and country;

Wooden hanger on wheels

plastic models are too light in weight, so they can only be used with a small number of things.

Floor hangers on wheels are the most convenient and common type of locker room equipment in schools, offices or apartments.

Varieties

Wood is a very warm material, pleasant for home furniture, practical and hardy. In addition, wood is flexible in giving various forms of furniture and its finishes. Therefore, wooden hangers in the hallway have a wide range of varieties. In general, they can be generalized into such types as:

• vertical;

• Horizontal;

• With cabinet;

• With shoe cabinet;

• With a mirror.

The shape and size can be varied, so it will not be possible to somehow classify them according to these features. It is better to study the above list in more detail.

vertical

Hangers of vertical type can be made from solid wood or from several panels. Such hangers visually increase the height of the wall. In length, they can be very compact, from 30 cm, to an impressive height of 2 meters. Conventionally, vertical models can be divided by shape - they are simply straight, rounded or curved.

Vertical wooden models of hangers are sometimes supplemented with useful elements - a mirror or a shelf above the hanger - for hats, caps or umbrellas. Some wooden boards are sheathed with artificial or genuine leather - such models look very impressive in a classic interior style.

Yellow vertical hanger in the hallway.

When choosing, pay attention to the number and location of hooks. Outerwear tends to be bulky and close-set hooks will wreak havoc on loose jackets.

There must be at least 3 hooks per family member.

Horizontal

A more compact type of wooden hangers is horizontal.They do not have long vertical slats, visually expand the wall and can be successfully placed in the corners of a corridor or a small opening between doors.

Horizontal hangers.

The basis of horizontal models made of wood is a rectangular board on which hooks for clothes are placed. There are also options when on top, above the hooks, there is a row of boxes or a shelf - it is convenient to store scarves, hats, caps here. Due to its modest size, such a board can be hung in the dressing room and in the pantry.

With bedside table

The standard of an ergonomic model are wooden hangers with a pedestal. Everything is in one place - you can hang clothes, hide umbrellas with gloves inside, and put a beautiful vase on the cabinet.

Ergonomic hanger with cabinet.

In some models, the surface of the cabinet is upholstered, which makes it an excellent sofa for the hallway. Hangers with cabinets can either stand as an integral ensemble or be attached to the wall.

With a shoebox

Not everyone can boast of a separate dressing room, where all clothes and numerous shoes are stored. Shoe hangers are a great option for putting things in order in the hallway. As a rule, such a set consists of two separate elements - the wall hanger itself and the shoe cabinet. Of course, they are made of wood of the same breed and color, processed in the same way.

Convenient shoe rack.

Shoe cabinets can be varied. Some models have open shelves for shoes, others have doors. The top of the shoe rack can be used as an additional place to store shoes, or it can become a small pouffe in the hallway, for the convenience of putting on boots.By the way, some shoe racks are just sheathed on top with material, providing a place to sit.

With a mirror

No hallway can live without a mirror. And to create a harmonious interior, you can stay on a wooden hanger with a mirror. There are several options for this model:

• The mirror can be a separate element of the set, the frame of which is made of the same wood as the hanger itself;

• The mirror can be a built-in part of a vertical hanger;

• The mirror can be included in a set of a whole wooden wardrobe-rack, with hangers, cabinets and shelves.

Clothes hanger design

The design of the floor hanger will be affected by the functionality of the room in which it will be located. It can be categorized as:

1. Hangers in the hallway.
2. Wardrobe hangers.
3. Suit hangers.

metal hanger rack for storing jackets. coats and headwear

High racks are mainly placed in the hallway, topped with a halo of hooks for placing jackets, coats and hats. The base of such a floor clothes hanger often looks like a tripod, but it can also be round, so to speak, a monolithic support. The model is stable and roomy. Sometimes two rows of differently sized hooks are placed at the top at once. Thus, designers allocate storage space for hats in a separate level. In the lower third, the design can be complemented by a single shelf of small width or an umbrella stand. These elements add functionality to the main design and make it as practical as possible.

metal floor hanger in the dressing room

The wardrobe type of hangers is solid. Furniture is designed to store clothes hanging on hangers.The design certainly has a highly located rod, on which the trempel heads are fixed. Often the models have a standard design. The classic rack is equipped with two support legs and a crossbar. An increase in functionality is possible by supplementing the design with additional mobile rods.

tripod rack

Suit hangers are an ideal solution for full-fledged storage of business wardrobe details. The design provides a separate rod for trousers, a tier for ties, coat hangers for a jacket and a vest. The costume version of the floor clothes hanger can be supplemented with a movable or permanently fixed mirror and shelves for storing small things like: tie clips, cufflinks, etc. Often costume models are mounted on wheels. This makes it easier to move the system around the apartment.

Modular hangers

The modern vision of hanger designers has given rise to such a variation of them as modular systems. Despite the fact that their task is to save space, they allow you to place all the clothes you wear on yourself. The owner can configure the profile of the hanger at his own discretion, creating the most unusual design combinations, adapting the system to his own needs.

modular design of a floor hanger with plastic drawers for storing things and shoes

For the first time, Marta Schwindling thought about the possibility of creating a transforming hanger. She came up with the idea of ​​scaffolding, which is quickly assembled into a solid circuit and also quickly disassembled, which makes them super mobile. The result of observations and reflections was the birth of a floor clothes hanger, assembled from aluminum tubes of different lengths.The system was called "9o" because that was the angle of the holes for attaching the tubes.

Hangers are indispensable in store interiors. With their help, it is possible to be very creative in the presentation of collectible novelties. In a small hallway, a different interpretation of the model, consisting of hexagonal mini-blocks, would be more appropriate.

Hangers on wheels

modular hanger on wheels

Models of floor hangers with wheels are needed in offices and other premises where guests can be met not only in the manager's reception room, but also in a conference room or in another room. Small and easily rotating wheels will contribute to its quick rolling to where there is a need for this type of furniture. The choice of the dimensions of the hanger in the office should be based on the average number of visitors.

mobile floor hanger on wheels

Manufacturing process

When a floor structure is made, then in general the algorithm of actions is the same. First of all, you need to assemble the cross. In the case of a specific type of wood chosen, all elements must be made from it in order for the product to look good. For work, bars will be needed, the length of which is about 60-70 cm. They are sawn into 2 equal parts and treated with emery cloth. Then they are connected at an angle of 90˚. It is necessary to fit them at the junction as much as possible so that the connection is as tight as possible. The sequence of work is as follows:

• 4 points of support of the rack are made with a fitting, screwing it with screws to the legs;
• attach a rectangle with attached hooks to the top of the rack;
• coated with varnish and stain after the final treatment with sandpaper.

Stain is used to make the natural pattern that is present on the tree more expressive.The stain will give it more clarity. So that the wooden product does not damage the floor covering and does not slip, rubber is glued to the bottom of the cross. To do this, you can use any adhesive compositions for working with wood and rubber.

Copper products do not lose popularity and they have a pleasant appearance. Often, copper pipe hangers are used not only as furniture, but also as an interior item to complete the overall composition in vintage style. Copper products look good in interiors that have more warm tones, massive pieces of semi-antique furniture are used. To make a hanger with your own hands from pipes, which will look no worse than in the photo, you will need the following consumables:

• copper tubes 60 cm - 4 pcs.;
• copper pipes 1.5 m - 2 pcs.;
• copper tees - 2 pcs.;
• copper tube 90 cm - 1 pc.;
• epoxy glue;
• copper corners - 2 pcs.

Do-it-yourself deck chair for summer cottages: diagrams, instructions, photos Beaches and areas near pools are more often equipped with sunbeds. However, even in the backyard, the deck chair plays an important role ....

The base is made by connecting 2 tubes 60 cm long with a tee, the attachment point is additionally reinforced with epoxy glue. Similar actions are performed for two other copper tubes of the same size. 2 corners are attached to a 90 cm long tube - this is the future crossbar for hanging things. Then two tubes 1.5 m long are inserted into the tees, fastening them with corners at the top. After the epoxy adhesive has dried, the product can be used.

Note! It is also possible to add a stand made of wood, on which the base of the copper hanger will be fixed. This element can then be used to store shoes.

An economical homemade option is furniture assembled from plastic (PVC) pipes. But, the product without additional decoration does not have a pleasant enough appearance. Therefore, it is necessary to decide in advance how to improve such furniture - make a fabric cover, paint it or arrange it in another way. It is made of PVC pipes in the same way as copper. The length of plastic tubes, the number of angles and tees is similar.

Hanger made of wood and an example of a fixture drawing

If you want to show creativity, you can combine various options. For example, you can design a wall hanger with a reinforced complementary support on the floor. You can also create an excellent design for the nursery by making the main part in the form of a cloud or a tree.

In the hallway, an original hanger with a do-it-yourself fence or horns is suitable.

These devices are divided according to the type of hanging clothes:

• with hooks;
• with a bar under the shoulders.

In the first case, a hanger with hooks takes up less space, but the clothes on it can wrinkle. In the second one, you can hang any outfit on the shoulders, and at the same time it will remain neat and not wrinkled.

You can build a wall hanger yourself using all the necessary tools.

The original appearance and completeness of the product can be given using various decoration methods:

• decorate with decoupage;
• cover with craquelure or glisal;
• paint with paints.

The choice of material can be different, wood is the best of course.

First, using a metal brush, you need to clean the wooden surface of the hanger from dirt, dust and grease. After cleaning, using a spray gun or roller, you need to apply a layer of primer, very carefully filling all cracks.

Using the decoupage method, it is possible to create products that will fit into any interior in an original way.

You can recreate the elements of the pattern on the furniture with the effect of antiquity.

For work, blanks with drawings and scissors are used. The wrong side of the picture is smeared with glue and superimposed on a wooden surface and leveled to avoid the formation of air bubbles. After the glue dries, the surface of the product is covered with furniture varnish. Finish the job better using craquelure.

There are more interesting options for such crafts.

Glizale is a transparent paint that forms a textured surface. It is diluted with water and applied to the surface with the help of a textured sponge, creating the necessary pattern. This must be done quickly, as everything hardens within half an hour.

Craquelure is a type of varnish that is used to obtain the effect of artificial aging of wood.

Floor and wall hangers are considered a kind of classic.

Materials and general recommendations for manufacturing

To carry out the work, you will need to stock up on some separate tools to create a hanger for things that are supposed to be crafted. In general, the list includes:

• jigsaw;
• hacksaw;
• soldering iron;
• sandpaper;
• screwdriver or hammer;
• awl;
• yardstick.

It doesn't take much time or effort to make a classic hanger. The design begins with planning and a schematic drawing to eliminate errors in work. The jigsaw is used for blanks. From a wooden sheet, the required shape is cut along the contour. The edges can also be processed. Then the workpiece is given a look.

Tip! To burn the board, you can use a soldering iron or a gas burner.

After, the parts are covered with paint or varnish.In the hinged method of creation, they make "ears" - small round metal inserts. Holes are drilled to secure the screws into the dowels. There is an alternative way, which is to install through holes. They are used to fasten the structure to the wall through them. At the end of the process, hooks for clothes are attached. They can be arranged in rows or randomly.

Hanger panel with shelf

To make a panel with a shelf for a bath, you will need to cut out more details. Their shape and dimensions may differ from those shown. You need to cut out:

• transverse horizontal strips - 2 children. (135x12 cm);
• shelf - 1 child. (135x22 cm);
• side vertical elements - 2 children. (80x25 cm, curly);
• internal vertical elements - 4 children. (10x18 cm, straight).

Assembly is carried out using self-tapping screws. Through the marked and drilled holes in the plane of the crossbars, screw the fasteners into the wrong side of the side elements so that a strictly right angle is obtained between their straight edges, and the upper ends coincide. Secure the side rails with a few more screws.

By the same principle, fix the internal verticals, leaving a small gap between them. When connecting the top crossbar and vertical slats, you get a fairly wide base that can hold a shelf. Attach it with self-tapping screws along the back cut along the entire length of the crossbar.

When using branches as hooks, you need to form a flat surface on the side adjacent to the hanger. To do this, with a knife or planer, you need to remove the wood until the desired result is achieved.

Self-manufacturing - step by step instructions

The main criterion that should be taken into account when choosing the height of the hanger and its independent production is the anthropometry of its owner. A person should freely reach the hook or the top shelf. If the height of family members varies significantly and there are children among them, then it is recommended to hang the hooks at different heights so that everyone can use the hanger comfortably.

Self-production of a simple design of a hanger with a pedestal at the bottom of the boards is as follows.

Table 3. Independent production of a hanger.

Illustration	Step Description
	Step 1. From boards of the same width, it is necessary to glue the shield. To do this, they are placed on the edge and smeared with glue.
	Step 2. The boards are clamped in a given position with metal clamps.
	Step 3. To make the lower cabinet, you will also need to make shields - sidewalls, bottom and top cover. To do this, markup is applied to the board.
	Step 4 According to the markup, the necessary parts are made.
	Step 5 Glue the boards: the boards at the ends are treated with glue.
	Step 6. Glue is distributed with a brush.
	Step 7. The boards are pressed tightly with the ends and fixed with clamps.
	Step 8. The side walls on which the hat shelf will rest has a complex shape. For its manufacture, it is necessary to glue a long and a short board.
	Step 9. Cut off the excess on the finished shields.
	Step 10 After drying, the supports are cut with a jigsaw, giving them the necessary shape.
	Step 11 Holes for fasteners are drilled in the finished shields.
	Step 12 Install the dowels and grease them with glue.
	Step 13 Install the dowels and grease them with glue.
	Step 14 Finished elements are polished.
	Step 15. The edges are cut off, making them smoother.
	Step 16. Make holes for fasteners.
	Step 17The upper shelf is fixed on the dowels.
	Step 18. Fix the top shelf on the dowels.
	Step 19. After assembly, the hanger is painted and the hooks are screwed on.