Carbon heater - how does it work and why is it better than other heating options?

Fundamentals of proper operation

In order to prevent accidents that are associated with burns or electric shock, as well as to ensure the life of the device declared by the manufacturer, the following safety requirements must be observed:

1. It is forbidden to place devices in the immediate vicinity of flammable objects (tablecloths, curtains, lampshades of table lamps and floor lamps, etc.).
2. It is forbidden to use electric heaters as a dryer.
3. Do not place electrical cables under carpets, moving door leaves, in places with a high level of humidity or near open water.
4. It is forbidden to leave the heaters running unattended.
5. Repair of carbon heaters should be carried out directly by qualified specialists.

Compliance with these rules will prevent not only accidents, but also disappointment in the functionality of modern heating devices.

Carbon heaters with IR beams are an almost ideal device for creating and maintaining optimal comfort conditions in the premises. This is a very durable device, in some cases equipped with a swivel stand, and in addition, it is mandatory equipped with a protection system against the occurrence of various unforeseen situations.

It is very important to choose the right model of the device, taking into account all the features of a particular room and personal preferences.

How to choose a carbon heater

When buying, first of all, you need to decide on the installation location of the unit. If there is no permanent location, that is, it is supposed to move the device as needed, then you should choose a portable device - floor or tripod.

Versions with vertical arrangement of heating elements are more compact and preferable for small spaces. At the same time, the power of portable carbon heating devices usually does not exceed 2 kW, which makes it possible to provide the desired temperature in a room up to 20 square meters.

To protect children and pets from contact with appliances, it is better to give preference to a wall or ceiling modification, choosing a carbon heater with the ability to rotate the reflector to the maximum angle for even greater ease of use. At the same time, the strength of the brackets and the reliability of the structure for attaching the unit to the base should be mandatory conditions for choosing wall-mounted carbon heating devices.

The material of the reflector must be made of dense foil that resists being pressed by a finger, and the heater body must be protected from corrosion by a high-quality paint and varnish coating without chips and scratches.

The performance of the carbon heating device and its automatic systems upon purchase is checked on site, the manufacturer's operating instructions must be attached to the device.

How to choose a carbon heater

When choosing a high model, make sure it is equipped with a rollover cut-off system.

Economical carbon heaters for the home - how to choose them? Everything is very simple - you should focus on the dimensions and power. If there is space on the floor, you should stop at floor models. The most uniform heating is provided by high models in the form of columns. In addition, they look good in the interior. As for the selection by power, a device with a power of 1 kW is enough for about 25 square meters. m area.

Do you need energy-saving carbon fiber heaters for your summer house? We advise you to stay on any small-sized models. Remember that even the most low-power model (800 W) is enough for almost 20 square meters. m of living space.Buy such heating equipment for your dacha so that you can easily put it in your car and take it with you to the city (theft often thrives in non-residential dachas, especially when the owners are away for a long time).

Another selection criterion is the availability of security systems. We recommend that you take a closer look at models that have a system overheat shutdown and a rollover cut-off system. These systems will protect heating equipment from damage and help prevent accidental fires.

Therefore, special attention is paid to the presence of security systems.

Varieties of carbon heaters for the home

Depending on the design, wall, floor, ceiling and rotary models are distinguished.

wall

They are fixed on the wall and have an extensive distribution. The products are somewhat inferior in efficiency to ceiling variations due to the specifics of the movement of warm air currents, but they are compact and easy to use. Manufacturers offer a wide range of modifications; lines with an original design have been developed that can become a highlight of the interior.

Wall-mounted carbon heater

To prevent the possibility of excessive overheating, do not place wooden surfaces near the infrared battery. Wall series are optimal for use in families with children, as they do not heat up, the outer panel does not heat up so intensely as to spoil the surrounding decorative finish, the maximum temperature of the rear panel does not exceed 45 ° C.

floor standing

Their main advantage is mobility, since with a small weight they are easy to move from place to place, take them out into the street.Floor variations usually have an extraordinary performance, they often imitate a fireplace. The average weight of such products is 3-4 kg.

Ceiling

This is the most rational solution for operation in a long winter. Infrared radiation spreads from top to bottom, heats the space from the ceiling to the floor and the objects located in this zone, and the heat emitted by all surfaces is directed upwards. As a result, the temperature at the level of the head will be a couple of degrees lower than at the feet, which has a beneficial effect on the vital activity of the body.

The installation of ceiling equipment cannot be called laborious, it can be fixed directly on the finished plane using dowels and screws

Laconic design ensures that the technique will not distract attention from the key components of interior design

Swivel

This is one of the varieties of the floor category, leading in its segment in terms of sales. The rotating base can cover 90-120-180°, the heating radius exceeding 4-5 m significantly increases the operational capabilities of the unit.

Also, flat heating batteries, as well as heaters with several working elements, are in high demand. The latter have enhanced power, due to which they cover a large area. Noteworthy are cascade heaters with increased productivity, and hidden equipment mounted under the finish coat (the services of professional installation specialists are relevant here).

Best Wall Mounted Carbon Heaters

Wall-mounted carbon heaters come in a variety of designs, they can be made in the form of a picture, a panel or a decorative element, bringing their own characteristics to the interior.The advantages of wall-mounted devices include safety, comfortable use and aesthetics, plus they do not take up much space. In this nomination, two models are presented, which have become the best due to their quality.

Veito Blade S

The compact infrared carbon heater from Veito is completely safe to use. It does not emit UV radiation, microwave or X-rays, and the device can be used both indoors (heating area up to 50 sq/m) and outdoors. The design of Veito is unremarkable, it is made in the form of a narrow tube of almost a meter, which is easily mounted on the wall. Short waves evenly distribute heat throughout the room, and when the heater is installed on the ceiling, heating occurs in a matter of minutes. A separate plus is a completely sealed housing (class of dust and moisture protection IP55), thanks to which the heater is not afraid of moisture.

Advantages

• Convenient control (remote control);
• Auto shutdown in case of overheating;
• Four power modes;
• Great manufacturer's warranty.

Flaws

• High price;
• The thermostat is purchased separately.

The Blade S comes with a wall mount bracket, and mounting is simple enough to require no special skills to install. Buyers, in turn, recommend leaving a space of 0.5 m from the right and left sides of the device.

Ballu BIH-L-2.0

Almost all users like the stylish practical heater from Balu. It is able to quickly heat a room up to 20 sq / m, has a built-in thermostat and simple mechanical control.Made in the form of a narrow rectangular platform, it can be mounted on a wall, ceiling or a bracket that can be adjusted in height (up to 3.5 m). The heating power is large enough, when overheated, it automatically turns off, thanks to the built-in relay. IP24 protection class, buyers separately praise the device's strong case and reliable grille, it protects the device from accidental shocks.

Advantages

• Adjustable tilt angle;
• A light weight;
• Does not dry the air
• Inexpensive.

Flaws

A bit noisy in high mode.

Ballu BIH can even be installed on verandas and outbuildings to heat rooms in severe frost. The model withstands even high temperatures, but, accordingly, the heating area in such conditions decreases.

Kinds

• wall;
• ceiling;
• floor;
• rotary.

Let's take a look at each model in turn:

Wall-mounted carbon models are one of the most popular and common. Picture heaters are very convenient, they take up little space on the wall, they can decorate any interior due to their original design and a large selection of panels. However, this type of heater is not as efficient as ceiling mounted ones.

The wall heater is not dangerous for children, because its outer panel heats up only up to 60-75 degrees Celsius. Do not worry that it can damage the surface of the wall on which it hangs - the temperature of the rear panel of the heater does not exceed 45 degrees.

Ceiling heaters can successfully replace underfloor heating, as they ensure proper air circulation in the room. The infrared stream moves from top to bottom, warms up the objects that come across the path, and then the heat from them again rises up to the ceiling.Thanks to this movement, the air at the level of the legs will be slightly warmer than at the level of the head, which is very favorable for the person.

Ceiling models are mounted quite simply, and their varied design will allow you to find the right option for your interior.

The advantage of floor models, of course, is their mobility. You can always rearrange it or move it to another place, you can use it on a balcony or terrace, on the street, in the country, to heat offices, pavilions and warehouses. As you can see, the range of their application is very wide.

In addition, floor products have a very beautiful design that will bring additional comfort to your interior. In the dark, the heater will look like a fireplace, from which light and heat come. At the moment, this heating option can be called the most optimal.

Swivel - This is a kind of floor appliances, but only with a rotating base. The rotation angle is from 90 to 180 degrees, depending on the model (for more information about the types of devices, see the article types and types of infrared heaters).

The best carbon cabinet heaters

In such models, the same structure is used as in conventional infrared heaters, only instead of tungsten wire in an airless bulb, carbon fiber is used, which conducts current, but has an increased heating rate.

Due to this, less electricity is consumed and heat transfer occurs faster. Such devices are suitable for additional and full heating, depending on the power.

Veito CH1200 LT - for an open terrace

This is the best cabinet carbon heater for the terrace due to its vertical design on its own base that does not need to be fixed.

The device can be placed on the floor or a bedside table, which will create comfortable conditions on the outdoor area in late autumn or early spring.

It is convenient to set the desired temperature using the regulator and the selected one of the two modes. A narrow stand with symmetrical caps looks beautiful.

Pros:

• execution in a black or white case allows you to choose the device for a different interior;
• portable device can be taken with you to any room;
• light weight of 2 kg is optimal for transfer even to an elderly person;
• instant access to the set temperature after switching on;
• long service life due to carbon rather than metal thread inside;
• does not consume oxygen during operation;
• directional action, which is convenient for outdoor use, where heat rays are directed not scattered, but to the user;
• does not burn dust;
• completely silent;
• a guarantee from the Turkish producer of 5 years;
• suitable for indoor areas up to 15 m2;
• compact dimensions 700x170x80 mm are convenient for placement;
• built-in protection in case of accidental capsizing;
• two power modes for 600 and 1200 W;
• thermostat;
• overheat protection.

Minuses:

• cost from 10,000 rubles;
• there is no carrying handle (it is inconvenient to take on the device).

ZENET ZET-512 - for outdoor cafe

To create a cozy romantic atmosphere at the table of an outdoor cafe, this carbon heater in the form of a steel cone with a semi-open chamber for emitting infrared light is perfect.

Compact dimensions 210x210x545 mm allow you to install heater directly on table or on the parapet on the wall next to the customer seats. The reflection of the heated carbon fiber in the bulb creates the effect of a spark and serves as additional lighting.

Pros:

• swivel support has a range of 90 degrees;
• when used indoors, it is designed for an area of ​​up to 10 m2;
• two modes of operation with switching power to 300 and 600 W;
• low electricity consumption allows long-term use without significant costs;
• stylish design;
• own foundation;
• can be moved to any place;
• directed action of light waves;
• long service life of the heating element;
• fast reaching of working temperature;
• automatic shutdown when dropped;
• protection of the spiral from moisture ingress.

Minuses:

• cost from 4200 rubles;
• there is no carrying handle, so after turning it off you have to wait for the device to cool down.

Polaris PKSH 0508H - for the workplace

This is the best carbon heater in the body, which is well suited for use in the office or workshop. It can be installed vertically or horizontally, which is optimal for any working conditions.

Inside is one carbon fiber heater surrounded by a mirrored reflective surface that propagates light waves outward. At the end of the case there are two switches for setting the modes and the time interval of operation.

Pros:

• durable combined housing with metal and plastic elements;
• zone heating and the ability to install vertically or horizontally (for both methods, stands are supplied in the kit);
• 800 W power is able to heat a room up to 20 m2;
• two modes of 400 and 800 W allow you to use the device not at full strength, which saves electricity and increases the life of the heating element;
• The built-in timer can be set to turn itself off after 180 minutes of operation, making it easy to keep track of the instrument.

Minuses:

• no smooth temperature control;
• it is impossible to quickly change the position from vertical to horizontal (preliminary switching off, rearrangement and switching on to another mode is required);
• cost from 2500 rubles.

Benefit for health

Anions have a relaxing effect on the body, the air is purified from harmful dust and bacteria. This is akin to sterilization - patients will recover faster, it will be easier to endure the disease, the transmission of infection by airborne droplets is blocked to a certain extent.

Carbon infrared heaters do not dry the air, this will be appreciated by asthmatics, to whom a dry climate is contraindicated. The absence of burning is sometimes an important factor.

Separately, it is worth talking about the radiated range of carbon heaters. Quartz is endowed with the ability to delay ultraviolet radiation. In order to better understand what is at stake, it is worth recalling the fact: a person will not tan from the light falling through the glass. This happens for the mentioned reason - quartz, which is transparent to visible waves, does not transmit high frequencies of the spectrum. Ultraviolet rays cause skin cancer, this type of device is considered safe from this point of view.

The principle of operation of the device

After installing or mounting the device, the reflector is manually directed in the desired direction and fixed. The device is connected to a household network with a voltage of 220/230 V and almost instantly reaches the maximum power of heat radiation. The efficiency of carbon fiber in heat transfer is higher than that of metals, since it requires almost no energy to heat the filament to the radiation temperature, while the quartz glass of the tubes transmits radiant heat without loss.This is due to the cost-effectiveness of carbon heaters in comparison with other lamp infrared heaters.

Heating of the room is provided by heating the objects to which the heater is directed, with their subsequent release of heat into the air environment of the room. There is no radiation energy consumption for increasing the air temperature during the passage of waves through it, since the energy of long-wave infrared radiation of carbon is absorbed only by dense media. In this case, not only the surfaces of the furnishings of the room are heated, but also their internal heating to a depth of up to 2 cm, which helps to extend the heat transfer time after the heater is turned off. Many models of carbon units are equipped with a thermostat that allows you to maintain a certain temperature in the room.

Like all modern electric heating devices, the carbon heater has an automatic shutdown device in the design in case of a fall, overturning or a dangerous angle of inclination.

Carbon heater what is it: general characteristics

This is a device consisting of carbon fiber, which is enclosed in a vacuum quartz tube and heated by infrared radiation.

This is a completely new type of radiator, which was invented at the turn of two thousand years and quickly gained popularity among buyers due to its performance and original appearance.

Among the important characteristics of the equipment:

1. Easy to operate and maintain.
2. Compared to other heaters, carbon heaters have a much larger operating range.
3. The carbon fibers are sandwiched between layers of fiberglass.
4. The equipment provides up to 30% energy savings.
5. There is practically no air circulation in them, which protects against a hot ceiling and a cold floor.
6. Does not create dust or bacteria.
7. Can store a large amount of heat.
8. They have excellent ability to spread heat.
9. Do not oxidize, durable.
10. Effective in all temperature conditions.
11. Carbon fiber is recyclable.
12. Do not create electromagnetic fields.
13. They heat up much faster than other types of heaters and require less energy for the same temperature.

Does a carbon heater have disadvantages? Without exception, all equipment has, and a carbon heater also has pluses and minuses. Among the shortcomings, for example:

• a quartz tube can break on impact;
• you can not dry laundry on it;
• installation close to wooden objects is prohibited: deformation from heating with a carbon heater is possible, harm.

This is interesting: How to choose a convector heater for your home - useful tips

Carbon heater: choose the right one

Carbon heater is one of the safe devices capable of long service life. Of course, when used correctly. It does not burn oxygen, does not reduce the level of humidity in the room, is safe for children, does not emit any harmful gases, vapors, or toxic substances.

Image gallery

Photo from

When choosing a heater, not the last place should be given to additional options, for example, an overheating protection system.

An important argument when choosing a floor portable device is a tipping sensor, which turns off the device in risky cases.

For many users, a timer and a knob that allows you to select the mode and power of the device are very important additions.

In the configuration of wall and ceiling options, the presence of a remote control is rightfully considered important.

Options - guidelines for choosing an infrared heater

Protective systems for floor heaters

Functions for adjusting the period and mode of operation

Remote Control for ceiling and wall systems

The safety of carbon heaters has been proven by their successful use since the beginning of 2000. More than 15 years of practical use of devices with a carbon heating element prove that they do not cause harm to health.

For the home, many consumers prefer to buy a floor model heater. Also, choose to have the functions of rotation, power adjustment, automatic shutdown, rollover protection

In order for the use of carbon heaters to bring only positive emotions, you need to choose the right model that suits a particular consumer.

When choosing, it is important to consider a number of features:

• where the device will be used - in the country, in an apartment, office or other type of premises;
• the area to be heated;
• what type of device is most suitable in a particular situation;
• required power;
• availability of additional functions and capabilities;
• the amount of the budget allocated for the purchase.

For buyers who value the fame and reputation of the equipment manufacturer, the cost will be slightly higher - you have to pay extra for the brand.

For office space choose ceiling and wall models. This design allows you to create an optimal temperature background for good staff performance.

Among the manufacturers of carbon heaters, the following devices are most popular:

• German Zenet models;
• French Noirot Royat;
• Turkish UFO, Maximus, Sinbo;
• Chinese Polaris;
• Russian Bilux.

The power of the devices, their design and the heated area depend on the model and manufacturer. Also, the warranty period of heaters ranges from 12 months to 6 years. It all depends on the manufacturer. Devices of different brands with the same power are able to cope with the heating of different areas. This fact should be taken into account when choosing the right model, carefully study the accompanying documentation of the model you like.

As for the price, traditionally the cheapest options are offered by Chinese firms. There are many and most of them are not of high quality. Therefore, buyers prefer to purchase devices from well-known manufacturers. One of the reliable brands of heaters produced in the Middle Kingdom are Polaris devices. They are trusted by buyers.

The heater should be located at a distance of 1 m from furniture. If there is not enough space in the room for proper installation of the heater, then it is better to choose a model with a wall or ceiling mount

Which company to give preference to is a personal matter of each buyer. The main thing is that the heater meets all the requirements for it. The most popular models are remote-controlled, have rotary mechanisms and are equipped with timers. Customers prefer comfort, even if you have to pay a little more for it.

Interestingly, many users of carbon heaters talk about the beneficial effects of infrared rays generated during operation. This applies to improving blood circulation, alleviating the course of colds and joint diseases.

It is important to use the heater correctly so as not to harm yourself.

Pros and cons

Advantages of innovative models:

• the use of equipment that produces infrared radiation for daily heating has a positive effect on the body - it helps to increase the intensity of blood circulation, stimulates the natural rhythm of the digestive tract, and in the winter months compensates for the lack of sun;
• Zenet carbon heaters and their analogues in the price range show high environmental friendliness, they do not dry the air, do not emit odors and harmful substances, do not burn oxygen;
• devices attract with modern design, fit perfectly into any interior;
• appliances consume electricity economically - carbon fiber exhibits high heat transfer, equipment with low power is able to quickly warm up the room;
• possibility of use as street heaters;
• high degree of protection against contact with moisture.

Carbon heaters do not dry the air and do not emit odors

Potential buyers who have encountered such a solution for the first time are wondering about the possible harm of an infrared heater. Experts note that here the radiation is not only unambiguously safe, but also beneficial. Carbon does not evaporate - it is placed in a vacuum in a tightly pressed tube.

But you can not ignore the shortcomings:

• the design is very fragile, you should be careful not to drop the glass container - it can easily burst;
• during operation, the unit makes characteristic sounds;
• high cost, tangible compared to the price tags for traditional mobile heating devices.

Moreover, the device does not create loud noises, but during a short-term cooling, crackling is noticeably audible.

Internal arrangement and advantages over other units

This device is in many ways similar to conventional IR heaters, but instead of a tungsten coil, carbon fiber is used as a heating element in the form of twisted ribbons and cords, placed in a quartz tube, from which air is forced out.

The electric current passing through this fiber heats the carbon (carbon) filament, from which infrared radiation occurs. IR rays, reaching surfaces and objects, warm them up to a depth of about 2 cm, after which the objects give off heat to the surrounding space.

Carbon heaters have a modern design. You can always choose a good option for a room of any style.

The undeniable advantage over fan heaters and oil heaters is that, with low power consumption, these devices have high heat output. So, if an oil heater with a power of 1 kW is enough to warm up 10 square meters. m. of area, then carbon fiber, having the same power, will provide heat for 30 square meters. m., and will continue to maintain the required temperature.

In addition to rational energy consumption, infrared carbon heaters have an aesthetically attractive appearance, compact size and modern design. The temperature of the heating element cannot exceed 90 ̊С. Consequently, there is no negative impact on the environment and the microclimate of the room: the heater does not dry the air and does not burn oxygen.

The performance characteristics that are inherent in heaters of this type are quite attractive to the consumer. These include:

• • economical energy consumption;
  • almost unlimited service life of the heating element, which is protected from moisture and dust penetration;
  • compact dimensions and weight within 4 kilograms;
  • mobility;
  • quite powerful heat flow;
  • instant targeted heating and very fast cooling when switched off;
  • the possibility of using outdoors (balcony, greenhouse);

fire safety.

Wall-mounted carbon heaters are good because they practically do not take up space, do not interfere, they are able to cover and heat a significant area with useful radiation.

A curious feature is the ability of these devices to have a beneficial effect on the human body.

The infrared rays emanating from the heater can penetrate deep into the body, which significantly improves blood circulation, serves as a prevention of colds, inflammatory processes in the joints and muscles.

Device device

The design of the carbon heater is practically no different from its predecessors. Inside the case, made of metal or ceramics, there is a carbon lamp, which forms the basis of the electric heater. According to the location of the devices are:

• floor;
• wall;
• ceiling;
• rotary.

Some devices have swivel devices. The main emitter is a sealed quartz tube. Inside, in a vacuum, there is a carbon thread made of carbon fiber.

To ensure radiation that is safe for the human body, the device operates in the long wave range.Therefore, carbon was chosen, which ensures the operation of the lamp in this range. In addition, the service life of such emitters is up to 10 years of uninterrupted operation.

Advantages and disadvantages

The new generation of heaters has a number of advantages, due to which it is in high demand and popularity:

• profitability;
• radiation power is 2-3 times higher in comparison with halogen or infrared analogues;
• carbon fiber is reliably protected from moisture, dust and other environmental factors;
• rapid heating of the room;
• long service life.

Like all devices, new heat units are not without their drawbacks:

• as a result of a fall or impact, the quartz tube may break;
• it is not recommended to install near wooden objects that can be deformed due to strong heat;
• do not dry wet clothes.

Carbon heaters were developed and patented in Japan in 2000. During all this time, they were subjected to various tests and trials. As a result, the high efficiency and safety of the equipment has been proven.

Heating report in infrared sauna with ceramic heaters

Time, minutes
Feel
The temperature inside the cabin at head level, degrees Celsius.
Comfortable. It seems to breathe easier than in carbon fiber. But the legs warm up much better. It is understandable. The feet and shins are heated in carbon fiber. Here, in ceramic, although there is no heater for the feet, but in addition to the shin heater, there are 2 more frontal ones, which not weakly warm the legs and hips, and partly the pelvic area. You can clearly feel the heat coming from the rear heater. There was no such bright sensation in the carbon one.It was felt that heat was coming from the back and sides. But here it is so that the heat is not felt.
26
6
It's harder to breathe than when I first entered. Warms up the back

Please note that descriptions of sensations are subjective. Therefore, especially meticulous - do not ask: "What does it mean GOOD?"

Well, I can say - PLEASANT.
30
11
Perspired forehead.
35
15
Breathe even harder.
41
25
Sweaty hands and shoulders.
didn't look
26
Sweat ran down his chest and stomach.
42
31
Sweat pours down the forehead, back, chest, stomach, arms. In general, everywhere BEFORE the waist. Feet got sweaty. Felt a heartbeat. Counted the pulse. 130 beats per minute. Well, I'm leaving.
48

What can I add. I “cooled down” for 20 minutes longer than when I warmed up in an infrared sauna with carbon heaters.

What is interesting is the temperature.

To funny. Üborg writes that, they say, carbon infrared saunas have an effect only due to the fact that they heat the air, and not the body with rays. Therefore, they say, the temperature in them is 11 ° C higher than in ceramic ones.

And you see the truth of life. The temperature in the ceramic at the outlet turned out to be even 3 ° C higher!

It’s understandable, they themselves write that their heaters heat up to 230-330°C, and carbon ones up to 60°C, and right there that the temperature of carbon saunas is “significantly higher (55-60˚С) than in saunas with ceramic elements (43-50˚С)". Why would?

The victory of emotions over common sense, or what?

“It’s good that you have your own cough. Wanted - coughed. So it is with them - “It's good that the keyboard is their own. I wrote what I wanted." And class hatred did not allow you to go and warm yourself in an infrared sauna with carbon heaters, taking a thermometer with you?

OK.

Now you know how carbon infrared saunas differ from ceramic ones. Let's compare together.

Conclusions and useful video on the topic

Video instruction on the use of the carbon heater:

Video about mounting infrared film:

Carbon heaters that emit infrared rays are able to warm furniture and people in the area of ​​action with high quality. They consume electrical energy very economically, transfer heat to the surrounding objects as much as possible, without wasting it on air heating.

The service life of the carbon heating element is more than 100,000 hours of quality work. The main thing is to choose the right model, taking into account the characteristics of your room and personal preferences.

Looking for an efficient infrared heater? Or do you have experience with carbon rigs? Please leave comments on the article and share your impressions about the operation of such heaters.