What to do if the toilet is clogged: how to diagnose a blockage and fix it

How to determine the location of the cork?

The build-up of residues on the walls of the pipes makes it difficult for the passage of water. Soon the drain becomes clogged and forms a plug, thereby causing a blockage. To establish the location of the cork, you can use a proven method. Try turning on the faucet in the kitchen and bathroom at the same time.

If the water drains as usual, then the problem is in the toilet. In the case when liquid care is difficult in the bathroom and kitchen, this indicates problems with the pipe.

As soon as you find a clogged toilet, do not rush to drain the water from the tank. You should know that its volume is more than 3 liters. Better to just turn off the faucet. This action will protect you from water leakage to the floor.

For convenience, it is recommended to use a regular bucket. Fill it with a small amount of water (about 1 liter) and gradually pour it into the toilet bowl. if the water does not flow, the cork is firmly seated.

One of the main reasons for the formation of traffic jams in plumbing fixtures is improper operation. Often, the residents of the house themselves can flush various objects and leftover food down the toilet, hoping that they will calmly pass into the drain hole.

To prevent water from leaking onto the floor, place as many rags around the toilet as possible. They absorb liquid well, so the floor in the toilet will not be damaged.

Let's take a look at some tips to avoid this kind of situation:

If you are thinking about changing pipes, you must select samples that are identical in size.
In the case of repair work, the toilet lid should be lowered to prevent debris, dirt and other waste from entering it.
Avoid flushing items such as cat litter, rough paper, and other types of debris down the toilet that can cause a clog. Thus, you will extend the life of the plumbing fixture and save a lot of money on replacing the toilet.

Use these simple tips to avoid plumbing problems. By adhering to clear operating rules, you will forget about such a problem as fighting blockage for a long time:

Image gallery

Photo from

Removing Solids Before Flushing

You can only use toilet paper

Measures to eliminate blockage at the initial stage

Regular care and prevention

What to do to solve the problem?

A clogged toilet involves the formation of a small plug in the water seal. In some cases, the pipes themselves become clogged, which means that a high-quality cleaning or even replacement of the riser will be required.

Chemicals

Many people, when they find a clogged toilet, prefer to use special compounds that are sold in any store. This way of solving the problem will require a minimum of effort. It is enough to purchase Mole or Caustic Soda to clean the pipes. Such chemicals are suitable for removing blockages. The substance is poured into the toilet and left there for a while. This is followed by a test flush. If the selected chemical does not help, you will have to use another way to get rid of the blockage.

If you live in a house and use a storage septic tank, this method can be harmful, since an aggressive environment often destroys beneficial bacteria, without which high-quality wastewater treatment will be impossible.

other methods

Many people traditionally clear blockages with a plunger, which is a special plumbing tool with a rubber nozzle and a wooden handle. It is used only in the presence of a small blockage. It is enough to place the rubber nozzle in the toilet bowl and perform a few sharp movements with the handle so that stagnant debris and waste are displaced.

If the use of a plunger proved to be ineffective, it is necessary to resort to a metal cable. Its length should be 3–5 m, and its diameter should be approximately 4–5 mm. A handle is attached to one end of the cable, and a drill-shaped tip is attached to the other. To clean the toilet in this way, you will need two people: the first will rotate the handle, setting the cable itself in motion, and the second will insert the tip into the toilet drain. To quickly eliminate the hickey, it is necessary to periodically change the direction of the cable. In complex cases, multiple insertion of the instrument with gradual removal of debris will be required.

Cleaning with a metal cable must be done very carefully, otherwise you may damage the toilet or sewer system. To protect yourself from contact with sewage, you should wear protective gloves.

In the absence of a special plumbing cable, you can take an ordinary steel wire with a small tip that resembles a bent ring in shape.

If the toilet is slightly clogged, you can clean it manually. This is especially true in cases where a large amount of paper, feminine hygiene items or a towel has become the cause of the blockage. It is enough to carefully pull out the thing that prevents the water from draining to improve the functioning of the toilet bowl.

We equip the removal of clarified wastewater

If the pit is constantly overflowing, cannot cope with the increased amount of drains, then radical measures are taken:

• install a larger container;
• an additional tank is connected in series;
• arrange a filtration well or drainage field.

The latter option is more profitable: the drive turns into a septic tank, which clarifies the drains.

drainage well

To arrange a drainage well, they dig a shaft up to 4 m deep until sand appears. The structure is built without a bottom or with a perforation system on the walls. Often used together. The bottom is covered with a layer of rubble - this is a natural filter with a thickness of 20 to 30 cm. The walls are made from any available materials: car tires, bricks, reinforced concrete rings. They must be airtight, but you can make or leave holes for additional filtration.

What is a drainage well.

Both containers are connected by an overflow pipe with a diameter of 110 mm. Withstand slope - 2 cm per 1 lin. m. Now mechanical cleaning takes place in the first chamber - heavy particles fall to the bottom. The liquid flows through the pipe into the next container, where it is clarified and goes into the soil.

Filter field

This is a large building that requires a lot of space. Consists of perforated pipes buried in the ground. They take out the earth to a depth of 1-1.5 m, fall asleep 25 cm of sand and gravel cushion. Pipes are laid on top, then again sand with rubble. Closes the structure with a layer of soil.

8 m of perforated pipes are needed to ensure the processing of wastewater from 1 person. Filtration fields occupy a large area, in order to reduce it, the pipes are laid in parallel. To move drains by gravity, they adhere to a slope of 25 mm per 1 linear meter. m.

Ways to clean the toilet with folk remedies

There are times when special chemicals are not at hand to deal with cork. In this situation, ordinary detergents and substances that can be found in the kitchen of any housewife will help.

You can use regular baking soda or concentrated vinegar. Consider ways to eliminate debris and dirt with these two ingredients.

There are several options for cleaning sewer pipes with ordinary baking soda. We will consider several interpretations, so you can choose the most suitable option.

First proven method

For the convenience of pointing the solution, you should take a bucket with a capacity of 8-10 liters. Pour half a pack of baking soda into pre-collected water (volume 5 l) and stir. The resulting solution should be poured into the toilet and wait 3 hours. Soda, once in the pipe, will begin to corrode fatty formations, thereby the cork will resolve and free the passage.

Use baking soda as a reliable remedy for light toilet clogs and sewer blockage problems.

The second proven method

This is the most convenient option. You do not have to mix the ingredients in a separate container beforehand.

By following simple rules and following the instructions, you will quickly get rid of the cork:

1. Half a pack of regular baking soda should be poured down the toilet.
2. We take a bottle of concentrated vinegar and pour it there.
3. It is necessary to close the drain hole and wait about two hours.
4. After a certain amount of time, hot water should be poured into the plumbing fixture, and wait again.

After completing this procedure, the resulting debris and dirt should be gone.

Vinegar should be used with caution

The third proven method

For the best effect, this scheme should be applied at night. This version uses salt instead of vinegar. The composition of the sweep is as follows:

1. A small amount (1 glass) of soda is mixed with salt in equal proportions.
2. This mixture is sent to the toilet.
3. After a few minutes, then pour about 1 liter of boiling water and leave for 8 hours.

By morning, the dirt that caused the traffic jam should be gone. With frivolous blockages, these options will help you on your own, without the help of a plumber, to cope with the cork.

The use of substances such as baking soda, salt, vinegar, or more concentrated acetic acid can effectively break through cork formations.

If after using soda and salt the situation has not improved, you should call a specialist. It is possible that the problem is not in the toilet itself, but in the sewer pipes of a private house, therefore, in order not to aggravate the situation, use the services of a qualified plumber.

How is the sewerage system in the apartments?

Sewerage in modern apartments performs the task of removing human waste. To this end, from each point where waste is generated (toilet, sink and bathtub), a waste outlet line is installed to a common sewer riser.

The apartments located on the neighboring floors are connected to it. Riser - a large pipe with a diameter of 0.1 m, located in the bathroom.

All sewer systems that are being built in apartment buildings and private houses must strictly comply with building and sanitary standards.

Previously, only cast-iron pipes were used for arranging sewage, but now mainly plastic ones are installed. In a plastic pipeline, the possibility of blockages is less likely, since defects do not appear on the walls, and the “overgrowth” of the riser section is very rare.

To facilitate cleaning of the riser in a high-rise, holes are made on each floor - sewer revisions.

Most often, cast-iron pipes of the sewer system, which are found in houses of the old fund, are subject to blockages. Overgrown pipes have increased resistance to drains, are subject to external factors

The standard configuration of a plumbing fixture (toilet, washbasin or bathtub) is quite simple:

• drain hole of the device;
• siphon (curved elbow, which is connected to the waste disposal line);
• pipeline supply to the riser;
• large pipe or riser.

A blockage can be observed in any area, while it should be borne in mind that the cause of its appearance is man-made. In the case of using a plumbing fixture for its intended purpose, problems should not be observed.

Mechanics and folk methods

In many homes, there may be necessary things - a plumbing cable and a plunger. If the devices are not in the apartment, then they are easy to purchase in specialized stores. Or try to use folk methods of getting rid of blockages - as practice shows, these methods act on blockages just as destructively.There are several options for cleaning pipes - cleaning methods can be easily combined and chosen depending on your desire. All techniques have been tested for decades and thousands of people.

1. The most famous mechanical method is plunger punching. This is where vacuum comes into play. The plunger goes down as deep as possible. Then you need to press on it and pull sharply towards yourself. The action will have to be repeated several times. If the method does not help with blockage, then you should turn to the force of pressure. The plunger cap is installed on the edge of the drain along the liquid cut. Until you get the desired results, push down hard with the plunger several times.
2. The second well-known method of getting rid of blockages is an ordinary steel plumbing cable. At its end, it is possible to fix special devices (a pike, a hook or a screw), with the help of which they clean the pipe, break through the blockage, or pull out its individual parts. The cable is lowered into the toilet and pushed forward until resistance occurs. Then they begin to rotate the handle clockwise, and then the dirt is pulled out with a cable. It is better to prepare a basin or a bucket for garbage and a rag in advance - it will be dirty.

Eliminating blockages at home provides a good solution of vinegar and soda. The compound acts in the same way as any chemical agent - under the influence of the reaction, the blockage dissolves. A pack of baking soda is poured directly into the toilet, and then vinegar is added there.

The important thing is that vinegar and soda act quickly enough.
The rag method also applies to folk remedies. Helps even in advanced cases

Take an unnecessary towel - after the procedure it will have to be thrown away. The thing is twisted and folded in half, and the ends are tied with a rope.You will get a thick tourniquet that needs to be pushed into the pipe. The action is somewhat reminiscent of a plunger, but the towel will fill the entire pipe and cope where the plunger does not bring effect. With a forward motion, the tourniquet is pushed forward until the water abruptly leaves.
Another good cleansing method is hot water with baking soda. Here you can act in two ways: either dissolve a pack of soda in a bucket and pour the resulting solution into the toilet, or pour soda into the toilet and lower the hose with hot water.

mechanical tools

plunger

Perhaps this is the first thing that comes to mind when the question arises, how to clean hand clogged toilet. And if you don’t have one, we recommend purchasing it, as it successfully solves the problem of small debris getting into the drain.

The principle of operation of this design is based on the force of pressure. With a forward movement, the water is pushed through and the blockage is destroyed by pressure, passes further into the common drain or breaks out.

If there is no plunger, you can make a similar tool from improvised materials, for example, a 1.5-2 liter plastic bottle. But these are, of course, emergency measures that will help quickly fix the problem, not the fact that the matter will be brought to an end.

It is necessary to cut the bottom and attach the resulting part to the handle - a mop. You can use it without attachment to the base, but the neck must be closed with a lid. Also for this purpose, you can take the CV boot from the available auto parts. If there are no improvised means, but you need to act now, you can try a vacuum cleaner with the function of wet cleaning and blowing. But be careful when working with the machine, under pressure, water can quickly spill out.

Causes of sewer clogging

The occurrence of blockage in the toilet delivers a lot of problems and unpleasant minutes.

In order to take preventive measures to prevent it in time, you need to know the reasons that contribute to its occurrence:

the device is not installed correctly;
salt deposition on the inner surface of sewerage pipelines;
the system is mounted without installing a drain pipe or a check valve that equalizes the pressure in the pipe at the time of draining;
food residues are specially flushed into the toilet;
foreign objects that have fallen into the sewer riser through negligence and are not able to dissolve in the aquatic environment.

Mechanical cleaning methods

If it is not possible to clean the blockage in the toilet with the help of folk or chemical means, then you can resort to mechanical cleaning. The procedure is carried out manually or using such "assistants" as a plunger and a plumbing cable.

hands

What to do if the toilet is clogged with foreign objects: toys, rags, large food cleaners? Before removing the blockage in the toilet, it is necessary to examine the emergency area manually. Putting gloves on your hands, follow four steps in sequence.

Scooping water out of the toilet.
They lower their hand into the drain and try to feel for a foreign object.
Grab soft clogs with your fingers and gently pull them out of the toilet.
Further and denser objects are pulled out with a wire with a hook at the end.

Sometimes, after unsuccessful attempts to pull an object out of the toilet, the owners decide to push it. Such actions drive the cork much deeper and only exacerbate the problem.

plunger

When the cause of the blockage has not been identified, and water is still able to seep, it is recommended to use a plunger to clean the toilet. The effectiveness of cleansing depends on the right "helper". On sale you can find several varieties of plungers.

• Cup-shaped. This is a simple model. It is designed to eliminate small congestion. A bowl-shaped plunger will help clean the sink. But in the case of congestion in the toilet, this remedy is ineffective.
• Taper. This model is able to eliminate the blockage in the toilet. The dense rubber nozzle, which has a cone-shaped shape, ensures the correct entry into the drain hole.
• Pneumatic. The most advanced model with great power. The plunger is equipped with a nozzle that can "maneuver" inside the pipe.

The procedure for cleaning the toilet with a plunger is quite simple and includes the following three steps.

1. A rubber nozzle is placed on the drain hole so that the plunger completely covers it.
2. To pump out, make a few light pressures (the rubber suction cup should “adhere” to the hole).
3. At this moment, they sharply pull the handle, and tear off the nozzle from the drain hole.

The hydraulic shock with this technique provides cleaning from the cork formed by newsprint, small cleanings or other rubbish.

plastic bottle

How can you pierce the toilet without a plunger at home? If the necessary device is not on the farm, then you can try to create hydraulics using an ordinary plastic bottle. The purification process is carried out in four stages.

1. The bottom of the bottle is carefully cut off.
2. Screw the lid on tightly for the rest.
3. A plastic bottle with the cut side is placed on the drain hole.
4. Holding on to the top with the cover, try to create a water hammer as if using a plunger.

Plumbing cable

Such an event is used in the most extreme cases, when none of the above methods can remove the cork. The help of a plumbing cable is resorted to in case of clogging of the sewer with construction waste (sand, clay, putty), cat litter. The auger (cable) is a flexible steel "snake", with which you can reach the most inaccessible sewerage areas. It is equipped with a special handle that provides rotation of the cable. To clean the toilet, seven steps are sequentially performed.

The plumbing cable is lowered into the drain hole.
Slowly advance the cable along the bends of the toilet.
The cable is carefully turned so that it passes freely through the pipes.
When the auger rests, they begin to rotate it, winding up the garbage.
The cable with the hooked "weight" is carefully pulled out of the toilet.
After cleaning the auger, it is re-launched into the sewer pipe.
Repeat until the blockage is completely eliminated.

Cleaning the toilet at home is easy. But it is hardly possible to call this procedure pleasant. In order not to resort to the need to clean the toilet, experienced owners recommend prophylaxis. To do this, from time to time it is necessary to clean the toilet with baking soda and vinegar. In this case, plaque and dirt will not accumulate, and the toilet will always be snow-white and fresh.

How is the sewerage system in the apartments?

Sewerage in modern apartments performs the task of removing human waste.To this end, from each point where waste is generated (toilet, sink and bathtub), a waste outlet line is installed to a common sewer riser.

The apartments located on the neighboring floors are connected to it. Riser - a large pipe with a diameter of 0.1 m, located in the bathroom.

All sewer systems that are being built in apartment buildings and private houses must strictly comply with building and sanitary standards.

Previously, only cast-iron pipes were used for arranging sewage, but now mainly plastic ones are installed. In a plastic pipeline, the possibility of blockages is less likely, since defects do not appear on the walls, and the “overgrowth” of the riser section is very rare.

To facilitate cleaning of the riser in a high-rise, holes are made on each floor - sewer revisions.

The standard configuration of a plumbing fixture (toilet, washbasin or bathtub) is quite simple:

• drain hole of the device;
• siphon (curved elbow, which is connected to the waste disposal line);
• pipeline supply to the riser;
• large pipe or riser.

A blockage can be observed in any area, while it should be borne in mind that the cause of its appearance is man-made. In the case of using a plumbing fixture for its intended purpose, problems should not be observed.

Professional plumbing cable

This is a special plumbing tool, which is a cable with a handle at one end and a nozzle at the other. There are many types of cables (rope, spring, rigging, tension, etc.) with a diameter of 6 to 16 mm and a length of up to 60 meters.

Plumbing cable is used as follows:

1. Lower the end with the nozzle all the way into the toilet drain.Further, in order to push the cable into the water seal, they begin to rotate its handle clockwise.
2. By rotating and pushing the cable, they advance it to the maximum depth to the cork.
3. With percussive movements, they break and push deposits into the riser, or cling and pull garbage out.

If the problem of blockages in the toilet occurs often, then you should think about purchasing such a tool:

• One-pipe and two-pipe heating system Leningradka: scheme, installation, video
• How to disassemble an old cast iron battery
• Connecting sections of heating radiators to each other
• Is it possible to paint hot radiators with paint and enamel

Why is the toilet clogged

If the toilet is clogged, it is important to immediately deal with the problem. This will help to avoid the most unpleasant consequences.

The following unpleasant factors can lead to blockage:

• foreign objects (rags, children's toys, personal hygiene items);
• incorrect installation of the structure;
• damage in one of the sections in the sewer system;
• there is no valve that regulates the pressure in the sewer pipe;
• the cause of blockages is sometimes associated with defects in the toilet itself;
• salt deposits that accumulate on the inner surface of the pipes.

Poor installation of the sewer system causes many problems. There may be an accumulation of water in a certain section of the pipe due to its sagging. Bad fastenings lead to freezing of pipes.

Nothing but toilet paper should be thrown into the toilet. It is not recommended to pour grease from dishes, food leftovers, tea leaves, construction waste into the toilet bowl. It is all the more dangerous to throw any items of clothing or personal hygiene into the toilet.

How to clean the sewers in a private house with your own hands

Before you decide which way is more convenient to clean the sewer pipes, you need to find where the blockage occurred. You will need to check the entire system, starting from the drain hole through which water does not escape. Most often, blockages appear:

• On sink drain;
• On the site between the bathroom and the kitchen;
• On the toilet drain;
• At the junction of the sewer riser and the toilet outlet.

All sewer cleaning methods are divided into mechanical methods, cleaning with chemicals, thermal and hydrodynamic cleaning. The choice of method depends on the location of the blockage, the material of the sewer pipes and the strength of the blockage.

Plastic pipes are the least likely to become clogged, but if they are clogged, then not all cleaning methods can be used. For example, certain types of plastic pipes cannot be thermally cleaned. It is undesirable to pierce thin-walled products with a metal method; for such pipes it is better to use chemical compounds.

What causes blockages?

Paper. Sewerage often clogs when magazine pages or newsprint get into the pipes. If there are a lot of them, a cork will appear blocking the path of the liquid;

• Food waste. The toilet is able to absorb sour borscht without any problems, then boiled potatoes or missing porridge form a strong blockage;
• Rags. Usually they get into the pipes after you pour water down the toilet after washing the windows or the floor. Even a small particle of a rag clings to the slightest burr in the pipe, dirt sticks to it and a water barrier appears;
• Animal fur and human hair. They cling to any obstacles inside the pipes, in addition, they settle on the gratings that protect the outlets of the bathtub and sinks;
• Construction garbage.Gathers in places with a slight slope and after a while completely covers the pipe;

• Cat litter. Fillers that absorb a lot of moisture used for pet toilets are made on the basis of clay, this material sticks well to pipes and is able to block them tightly;
• But the main culprit in the appearance of blockages is fat that enters the sewer when washing dishes. It settles on the walls of the pipes, this leads to the fact that in 1-2 years the pipe lumen will be clogged.

How to find the area where the blockage occurred

If water slowly flows out of the toilet, bathroom or sink, you need to find not only why the pipes are clogged, but also where it happened.

Symptoms	Where to look for a clogged pipe
The water from the washbasin or bathroom does not drain well, there is no problem in other rooms.	You need to check the siphon of the sink or bathroom, check the corrugated pipe connecting the sewer pipe and the siphon.
Some plumbing fixtures do not work, water from the toilet is removed without problems.	The blockage is near the comb. You need to look at the pipes in front of the tee to which the toilet is attached. A sagging comb indicates that dirt has collected at the lowest point.
Water does not leave all plumbing partings; when draining from neighbors, the level rises above.	Clogged sewer pipe in the basement or riser.

Do-it-yourself folk methods for removing blockages

With an unexpected blockage in the toilet, many people prefer to act quickly and immediately, trying to fix the problem as soon as possible.In some cases, with a simple blockage caused by a small accumulation of deposits on the walls of pipes, the following folk methods, which have been tried more than once in practice, can help.

A quick way to clean the drain with boiling water

The first method suggests cleaning the blockage using boiling water.

1. Boil a bucket of water.
2. Pour its contents into the toilet at a right angle, while acting as quickly as possible.
3. If the water begins to slowly leave, you should repeat the procedure a few more times.

Such simple actions can save the sewer from simple blockages.

Boiling water will help eliminate a simple blockage

Soda will help to eliminate simple blockages in the toilet

The second method is to use baking soda.

1. Pour ½ pack of baking soda down the toilet.
2. Release the water after a few minutes.

Soda, which is an active alkali, is able to dissolve simple blockages, ensuring the functionality of your plumbing.

Baking soda will help get rid of minor blockages.

Using baking soda, vinegar and boiling water

The third method is based on the use of soda, vinegar and boiling water.

1. Flush the water out of the toilet, leaving a small amount at the drain.
2. Pour in ½ pack of soda, trying to push it deeper.
3. Pour a glass of table vinegar 9% into the drain.
4. After 20 minutes, pour boiling water into the toilet bowl or simply flush the water.

A way to clear a toilet clog with mustard

Another folk method to deal with such blockages is based on the use of mustard.

1. Heat up 10 liters of water.
2. Put 5 teaspoons of mustard in hot water (1 teaspoon of mustard per 2 liters of water).
3. Pour the resulting composition into the toilet.
4. Release the water after a few minutes.
5. If necessary, use the composition several times.

Folk remedies for blockage in the toilet

How to clear a blockage in the toilet at home
conditions? Once you find a problem, you can
go to the grocery store
remedy or use folk
proven methods that do not lose
its popularity.

Important! improvised means
effective only for minor
blockages

Hot water

Important! If there is a plastic thin pipe in the sewer structure, then when using high temperature water or vinegar, you must be as careful as possible so as not to damage the structure

If you are sure that your plumbing
withstand such a "test", then boldly
pour hot water bucket.

Important! The liquid must be
hot, but not boiling water!

Fill plumbing with 80% water. Liquid
should pour quickly and hold the bucket
at an angle of 90 degrees. Wait a bit,
and then try to just drain the water.
Is she slowly leaving again? Then take
to arm the plunger. Repeat procedure
flush with hot water and then use
suggested tool.

If the blockage is simple and caused, for example, by deposits from cat litter, then this method should remove it.

Baking soda

Prepare half of the package
in a bucket of hot water. The composition will turn out
aggressive as the combination of soda
and water forms an alkaline solution. However,
it will not harm the pipeline.
Hot soda water will do just fine
with fat accumulated on the inside
pipe side and organic
pollution.

You can use soda in other ways.
Pour half a pack of product into
toilet bowl and flush after 3-5 minutes.

Acetic acid

Important! Before proceeding with the procedure, leave only a small amount of liquid in the drain hole of the plumbing

Pour in half a box of soda
as deep as possible into the drain. Following
pour a glass of 9% vinegar.
Wash off after a quarter of an hour
bucket of hot water.

Sometimes another option is used
the same way. Action algorithm
similar. Fill half of the box
baking soda into the toilet, then pour
a whole bottle of vinegar there. Leave
for 2 hours, and then wash off the composition with a bucket
hot water.

Salt for cleaning the toilet

Sometimes vinegar is replaced with table vinegar.
salt. To get an effective
composition, soda and salt should be mixed in
equal proportions. For example, take both
substances in 1 cup.

After obtaining the mixture, pour it into
toilet drain hole and fill 1
liter of hot water.

It is better to carry out the procedure at night,
since the composition must act 7-9
hours.

Mustard Involvement

Dissolve 5 teaspoons of mustard in
10 liters of heated water. Less quantity
liquids are fine too. Most importantly, follow
proportions: 1 teaspoon mustard
powder in 2 liters of water.

The resulting solution is poured into the toilet. After 2-5 minutes, you can try to wash off. If the water still drains poorly, repeat the procedure.

What means are better
use?

There is an opinion that the notorious
dishwashing detergent "Fairy"
able to free the plumbing
fat blockage system. But the toilet
plugs are extremely rare
fat deposits, so this
option, of course, can be effective,
but with blockages in kitchen plumbing.
Otherwise, foaming agents
It's best not to pour it down the drain.

Also, no need to clean the pipes with Coca-Cola
or Pepsi. These drinks can cleanse
plumbing from plaque and darkening, but
they are unlikely to be able to cope with blockage.

The main causes of clogged toilet

The main task of the owner of the house is to identify the problem of clogging plumbing in a timely manner and urgently take measures to eliminate it. When water stagnates in the toilet, it is necessary to act quickly, but first you need to determine whether the water is draining in the remaining sewer units (sink, shower, bath).

The main causes of clogged toilets are:

• "overgrowth" of sewer pipes;
• improper operation of plumbing equipment;
• poor choice of model and errors in the installation of the toilet.

If the water from the toilet is gradually leaving, and your neighbors are all right, then the blockage is located no further than the outlet of the line into the sewer pipe. In the event of local clogging of plumbing, you can call a professional specialist, or you can try to fix the problem yourself.

The main reason for the slow departure of water is the "overgrowth" of sewer pipes.

As a rule, minor blockages can be eliminated independently by various methods. Home sewer cleaning: soda, cable, plunger

In case of violation of the rules for operating the sewer system or due to the ingress of sand, grease, hair and other insoluble substances into the system, blockage often occurs. The lumen of the pipe decreases, and if the problem is not immediately eliminated, then the drain will seal, causing the "paralysis" of the sewage system.

As a result of clogging of plumbing, water stops partially or completely leaving, and an unpleasant smell appears in the bathroom. In order to eliminate this problem, it is necessary to clean the sewer.

Errors in the installation of plumbing equipment usually occur when you choose the wrong model of the toilet, which is not structurally compatible with the place of its installation. The presence of this problem is indicated by an incorrect slope of the water drain line from the plumbing fixture to the riser. In rare cases, the design of the toilet contributes to the formation of blockages.

In order to choose the right high-quality plumbing equipment that is optimal for your conditions, it is recommended to consult with professional plumbers before buying

Blockage of the riser in an apartment building is a “public” problem, since it can be initiated by you or your neighbors, and collective participation is not excluded.

Clogging of liquid waste along the highway within the apartment is your problem, so it’s better to fix it yourself. Rags, cat litter, diapers, construction debris and other items that fall into the toilet are not liquid waste, so these blockages are quite difficult to eliminate.

What not to do

On the Internet today there are many tips on what to do if the toilet is clogged, and how to clean it at home. However, not all of them are effective.

• Cleaners like Fairy, although they are effective in removing hardened grease from dishes, are hardly useful in the fight against cleaning the toilet. They are simply not able to dissolve even a thin cork of organic origin.
• The same applies to Coca-Cola, Pepsi and any other product. It is easier to buy ready-made household chemicals.
• Products such as whiteness or bleach will not help either. The latter is relevant only if, if you use it regularly. However, the presence of harmful vapors does not allow this.