How to wash the filter from the hood

The best ways to get rid of stubborn fat

For old and large stains, traditional cleaning methods are useless.If the mesh has become very sticky and dirty, and you have not washed it for several months, in order to get rid of fat, you will have to resort to more radical methods.

The most affordable natural cleaners:

• lemon acid;
• mustard powder;
• vinegar;
• ammonia;
• laundry soap.

All these tools are effective, but they may not be suitable for combating chronic pollution. If the first attempt was unsuccessful, use store-bought products or try washing the mesh by boiling.

Make a concentrated solution by diluting baking soda in water. Immerse the mesh in boiling water and hold for 10 minutes, and then proceed to remove the dirt.

store supplies easy remove old fat, but when using them, it is important to ensure that the cleaning agent does not get on the skin of the hands, eyes or mouth

Decontamination chemicals

Sometimes, in order to remove large and old stains of dirt, you have to resort to emergency measures and use chemicals. Before using them, read the instructions so as not to damage the equipment and not harm yourself.

Most store products work well. At the same time, they are quite inexpensive.

The best means for cleaning old grease stains are considered to be Russian sprays "Anti-Fat" and "1 Minute", as well as products from other countries, such as "Shumanit", "Synergetic", "Anti-Fat + Radiance". Most often, even the most difficult stains can be removed in one application.

Related article:

Household solvents

Household grease removers are less effective than some harsh chemicals, but are more suitable for home use.

For the result to meet expectations, follow the standard instructions:

• remove the grate, first clean it from hanging lumps of dust;
• place the mesh in a voluminous basin or sink;
• carefully treat all areas on both sides with the selected household preparation, and do not forget to wear gloves;
• leave the solvent for the period of time indicated on the package;
• rinse off with warm water.

Rinse the grate well several times so that no traces of the product remain on it.

If the first treatment was not successful, repeat the procedure

Aggressive cleaning chemicals

In some cases, it is necessary to wash old fat deposits with the help of aggressive chemicals that are not suitable for regular use. These substances are used only when other methods have been tried and failed.

to combat grease stains on the kitchen hood, you can use potent agents, for example, "Mole", "Tube", "Steril"

Before starting work, familiarize yourself with the risks:

1. For the entire period of operation of the hood, you can use such funds only 1-2 times.
2. If the instructions for mixing the solution are not followed, the metal structure of the hood may bend.
3. The use of such a strong agent is relevant only if the burnt fat has clogged all the outlets and cells of the lattice.

Start work only after familiarizing yourself with the safety measures.

Cleaning with a steam generator or dishwasher

The most effective way to clean dirty nets is with a steam generator. If there is such a device in the house, be sure to use it, following the instructions.

Illustration	Action Description
	Turn on the steam cleaner and go over the entire surface of the grate
	Increase the steam supply and clean in a circular motion. We make sure that the fat dissolves. In those places where stains remain, we go through several times.
	Wash the grate with a damp cloth
	To remove all the spots, take a metal washcloth of a small degree of hardness and wipe all surfaces well
	We repeat the whole procedure for the hood body

Try not to press hard on the grate, using an iron sponge, so as not to scratch the coating. Steam works great on even the toughest stains, but sometimes it may need to be re-treated.

What harmful substances are released in the kitchen during cooking

The kitchen is the room where households spend most of their time. According to statistics, a person is on it every day from 3 to 8 hours. And at the same time, he breathes in air that cannot be fresh and clean by definition, because food is cooked in the kitchen, fried, steamed, boiled. A rare kitchen can boast of spaciousness and convenience. Typical Soviet buildings were built in such a way that a minimum area was allocated for the kitchen. Like, cooked food - and free. With poor ventilation in ordinary and especially in small kitchens, the air is heavy. Keeping the window permanently open is not possible. But in fact, the air in the kitchen is not only not ideal in composition, but also contains a lot of carcinogenic substances. Among them, the most dangerous are the following:

1. Radon, a radioactive gas that enters apartments with natural gas that runs stoves. This gas causes lung cancer along with smoking.It should not be forgotten that a person receives 75% of all radioactive radiation not from the activity of the sun and not from staying in radioactively contaminated territories, but from radon. There is even more radon in the bathroom than in the kitchen, because radon enters apartments through tap water. By equipping faucets with good carbon filters, human exposure to radon can be virtually eliminated. But with regard to gas, the only method is to ventilate the room and have a well-functioning exhaust hood.
2. Aldehydes: formaldehyde, acrolein, ammonia, acrylamide, polycyclic aromatics, saturated and unsaturated acids. They are released during the frying process. And if droplets of water fall into the hot oil, a micro volcanic eruption occurs from the oil-water mixture. Droplets "shoot" high and far, settling on the ceiling, walls and furniture. Over time, dirt and dust adhere to them, emitting carcinogenic volatile substances.
3. Carbon monoxide. The concentration of this substance should not exceed 2%, and a family of 3 people consumes 1 m3 of gas daily, i.e. the concentration of carbon dioxide is almost 4%. Without a good exhaust, you can easily get poisoned by the combustion products of a gas burner.
4. Increased humidity. The air of an average 9m2 kitchen contains three glasses of water in the form of vapours. Ideally, air humidity should not exceed 60%. a well-functioning hood can help with this.
5. Microorganisms. Microbes and bacteria thrive in warm, humid environments. That is why the kitchen should be cleaned as often as possible. And to ensure high-quality outflow of air into the ventilation shaft.

Hoods are different in structure and functional device.Depending on the type of exhaust device, there are exhaust and filter hoods. In the first case, the hood takes air from the kitchen and “carries” it into the ventilation shaft. Filtering types of hoods are equipped with several layers of carbon and grease filters that purify and disinfect the air, returning it back to the room. This is a more complex device. Filters are changed every 3-6 months.

To clean them, you must first disassemble.

1. Disconnect the hood from the power supply. Remove the bottom cover, which is installed parallel to the gas burners. Unlatch the latches and pull the cover down, it can be easily removed. If the grille is attached with bolts, unscrew them with a screwdriver.
2. Take care of filter extraction. They are fastened with clamps or inserted into grooves.
3. Remove the pipe containing the filter. It also needs to be washed with a grease remover. If the design of the pipe hood does not suggest, simply remove the air filter and replace it with a new one.
4. Prepare a grease remover in advance. It can be a regular dishwashing gel. Apply the product to a sponge and rub it on the surface of the grate until foam forms. Place the rack in the soap solution. If the contamination is severe, wipe the surface with citric acid. In extreme cases, when the grate has not been cleaned for a long time, the fat has dried up and does not lend itself to conventional means, use a pipe cleaner. However, remember that excessive use of chemicals will damage the metal surface of the grate.
5. The air filter does not always need to be cleaned. It is best to throw away the old one and replace it with a new one. If you decide to just clean the filter, you can put it in the dishwasher or wash it by hand.

Signs of need for cleaning

The hood is an indispensable attribute of modern kitchens, which not only removes unwanted odors, but also complements the interior compositionally. In order for the device to perform its functions well and have a beautiful appearance, it is necessary to carry out timely cleaning from the inside and outside, preventing the aging of fat deposits. When using the hood at home, it is recommended to clean it about once a month, but there are a number of signs that indicate the need for urgent care:

• On modern technology, a special sensor is installed with the image of a lattice icon or the letter "C", which lights up at a certain degree of contamination. With such an indicator, it is not difficult to understand when to wash the device.
• When the sensor is not present, conclusions about the required care can be made based on the change in the hum of the hood. It is urgent to clean it if the sound during operation is uncharacteristic, louder.
• Odor removal failure. The smell goes away worse and more slowly than before, you need to choose a more intense mode to effectively eliminate it - cleaning is necessary.
• The easiest way to understand that the hood needs to be washed is an external examination. By regularly checking visually how dirty the parts are, you can determine that it is time to clean them.

Folk remedies against pollution

If you didn’t have a professional cleaning agent at hand, then you can use folk methods that have not lost their popularity for many years in a row. In this case, you will have to prepare the following:

• laundry soap;
• acetic acid;
• lemon juice;
• soda.

Each housewife will cope with the preparation of a folk remedy for cleaning fatty deposits

Using soap: step by step instructions

It is worth noting that in addition to one piece of laundry soap, various devices will be required in the process of work: washcloths, sponges, rags.

Step one: First you need to grind the soap (you can cut it into pieces), and then place it in a container with water at a temperature of at least 45 degrees. If desired, you can also add a little liquid soap and washing powder there. The amount of the above funds will depend on the complexity of the pollution.

You will need to take laundry soap at least 70%

Step two: place a filter from the hood in a container with a solution and leave for half an hour.

The capacity must match the dimensions of the filter

Step three: while the filter is soaking, it is necessary to soak a sponge in this solution and wipe the body of the exhaust system with the hard side.

If dirt remains on the grate, they can be removed with a steel wool.

Step four: after half an hour, you need to remove the filter and use the same sponge to remove the remaining fat.

Upon completion of cleaning, the filter should be dried, and only then installed

Using lemons: step by step instructions

The main advantage of this method is that after the procedure you will not feel the pungent smell of chemicals, but only a pleasant citrus aroma.

But, it is worth paying attention that the “lemon peel” is not suitable for people who have a pronounced allergy to citrus fruits.

Step one: first you need to take two lemons, cut them into halves and squeeze the juice.

Squeeze the juice of the lemon carefully using a special tool.

Step two: now you should take a rag, soak it in lemon juice and wipe the filter liberally. In this form, it is left for 20 minutes.

You will need to thoroughly soak the grate with juice

Step three: remove the remaining fat with a damp sponge, after which the grate should be left to dry.

It is necessary to wipe the dirt intensively to remove them from the surface.

Using soda: step by step instructions

Baking soda is one of the most popular products that is used not only to clean kitchen equipment, but also utensils. In addition, it is environmentally friendly and safe for the respiratory tract, which can be used without fear.

Step one: you will need to prepare a large saucepan, then fill it with about two-thirds of the water and put it on fire.

Water should be brought to a boil

Step two: add about one cup of baking soda to boiling water, after which you need to reduce the heat to a minimum.

You can add more baking soda if you like, especially if you have a lot of dirt.

Step three: now you need to place the grate from the exhaust system and the filter in this pan. While the liquid is boiling, the fat will have time to dissolve.

The parts of the hood should be “boiled” on fire for ten minutes.

Step four: after a while, you need to get the parts and look at their appearance. If traces of fat remain, then in molten form it will be easy to remove them under the pressure of warm water. If there are still unremovable contaminants, then the grate should be “boiled” for a couple more minutes. After cleaning, all these parts must be dried.

Remains of fat quickly move away under running water

Step Five: Now you need to take an unnecessary toothbrush and go through all the corners of the grate with it, where particles of fat could remain.

The result of cleaning the filter grid with baking soda

Using vinegar: step by step instructions

Before using acetic acid to clean household appliances, it is necessary to open the windows in the room - this substance emits fumes with a pungent odor, which can make you dizzy.

Step one: apply vinegar to the sponge, and then walk along the grate with its hard side.

Vinegar is active for 20 minutes

Step two: after a while, you need to take a hard brush and remove the remnants of fat.

For greater effectiveness, it is recommended to use a dishwashing detergent.

How often should a kitchen hood be cleaned?

The frequency of cleaning the kitchen hood depends on the frequency of cooking. With regular cooking, you will have to wash and clean the structure above the stove once every three months. If you cook infrequently, then the frequency of cleansing can be reduced to 1 every six months or even a year.

Provided regular cleansing of fat, the cleaning process will not take much time. If you know some tricks or use special detergents, then even old-fashioned fatty deposits will be easy to remove.

Ready-made products for cleaning the hood from grease

Now let's figure out how to wash the hood in the kitchen. The easiest way to do this is with ready-made tools:

1. Soda is in every home. Prepare a soda solution - take a glass of soda for 2 liters of water. Pour the solution into a container of a suitable size to fit the parts of the hood. After boiling the solution, soak the contaminated elements in it for half an hour. After that, the fat will easily go away.
2. You can rub the fatty coating on the body with lemon juice or a solution of citric acid. After 20 minutes, the surface is rinsed with water. If necessary, parts can be soaked in a solution of citric acid (4 tablespoons per 1 liter of water).
3. Laundry soap removes many impurities. It is enough to grate a small bar of soap and dissolve the shavings in hot water. The parts of the hood are kept in the resulting solution for 20 minutes. Then they are well rubbed with a sponge or brush.
4. Acetic essence dissolves greasy deposits and adhering dust. It is enough to moisten a cloth in the essence and wipe the surface. After a quarter of an hour, the parts are rinsed with water. To soak the filters, you can prepare an vinegar solution. To do this, the essence is mixed with water in a ratio of 1 to 2. The filter is soaked for 20 minutes, and then washed.
5. To clean the hood, you can use a regular kitchen dishwashing detergent. It dissolves fat well. The surface can be washed with a sponge soaked in the product, or the parts can be soaked in a solution with the addition of dishwashing gel.
6. Compositions for cleaning stoves and ovens are also suitable for this purpose. Place the filter on a flat surface, such as a baking sheet, and then apply the cleaning agent to it with a sponge. After half an hour, the part is intensively rubbed with a stiff brush and rinsed with warm water.
7. Gel-like pipe cleaner "Mole" is used if no other compounds and cleaning methods help. The gel is applied to contaminated surfaces and left to act for 30 minutes. When the gel begins to act, fat deposits will foam. After that, the part does not even have to be rubbed with a brush, it is enough to rinse well under running water.
8. The kitchen appliance can be washed with ordinary bleach. Apply the solution with a brush and leave to act for 10 minutes, then rinse well with water.

If everything is already tired and you don’t know what else to play, then you can try downloading 1xBet slot machines and enjoy new experiences with the popular bookmaker.

You can also use a steam generator to dissolve fat. After that, the fatty deposit is easily washed off by any of the above means.

Folk methods for cleaning fat

If you do not know how to wash the mesh from the hood in the kitchen, then you can prepare an effective fat-dissolving agent at home. To prepare it, you will need citric acid, soda, ammonia, salt, vinegar, alcohol and laundry soap.

We prepare the tool as follows:

• we collect cold water in a five-liter pan;
• three on a coarse grater half a piece of laundry soap and throw into the water;
• then pour in half a bottle of ammonia, hydrogen peroxide or silicate glue;
• then add 1-2 tablespoons of citric acid, salt or soda ash;
• at the end, you can add half a tablespoon of alcohol or vinegar.

After dissolving all the ingredients, put the filter or other parts that need to be washed in the pan. We wait 15-20 minutes for the fat to dissolve well, remove the grate and rinse it under running water. During washing, the surface can be rubbed with a brush or sponge.

Methods for cleaning the hood in parts

To clean the hood in parts, it must first be disassembled. Each part can be cleaned in its own way. It depends on the composition of the material from which they are made and the level of contamination.

Once every 1.5-2 years, it is recommended to completely disassemble the hood and lubricate the motor.

The methods can be:

• Soaking.
• Boiling.
• Replacement.

It will not be superfluous to read the instructions for the device, it usually contains a scheme for collecting and disassembling the hood.

Filter cleaning features

In order to learn about cleaning the filter, first disassemble what type it is. Can be:

• Coal.
• Grease traps.

Just wiping the outer part of the case with the buttons does not mean washing the hood.

With charcoal filters, there is no need to search for the right recipe or remedy. Its design consists of plastic, and inside there is a replaceable filter with coal. When the cleaning properties decrease, the filter is simply replaced.

Before washing the hood from accumulated fat, it is necessary to de-energize and disassemble the air-cleaning device.

The second type of traps requires a choice of cleaning, they can be presented in 3 variations.

1. From acrylic. These filters can be cleaned and washed. But their shelf life is short-lived.
2. From synthetics. It can be: interlining, synthetic winterizer or special paper. Disposable filters. After use, they do not need to be washed. Throw away and replace with a new one.
3. From aluminium. Unpretentious in care, configuration elements need to be periodically cleaned without choosing one of the above options. All recipes and components can be used with aluminum.

After disassembling the hood, it is necessary to assess the extent of contamination and choose the best cleaning method.

How to clean the grid

In the popularity of mesh washing methods won: boiling and Coca-Cola. The last option is the safest. To work with it, rubber gloves, a respirator are not worn, and a window is not opened to ventilate the kitchen.It's just that the mesh should be soaked in soda and the pollution will fall behind by itself.

The mesh can be washed with a chemical agent.

The boiling method is more time consuming. For full immersion of the grid, a large capacity is needed. Make a solution of salt and soda and pour it into a container set on fire. Load the mesh. If a tank of this size is not available, boil each side in turn.

Fan and motor cleaning

You can wash these parts once every 1-2 years. Before carrying out such a procedure for the first time, take out the instruction manual. The ventilation manufacturer could point out where the required parts are, how to remove and wash them.

To remove old growths of fat, you will have to resort to aggressive methods.

The beginning of the action is the removal of the filters, after which the fixing bolts are unscrewed, the motor with the fan is removed. The fan impeller can be soaked in a cleaning solution for a couple of hours. It is strictly forbidden to wet the motor.

Use professional mesh cleaners.

How to clean the case, buttons and internal walls

To work with the case, you need to use soft tools that will not scratch the surface. This applies to both external and internal work. To clean all the terms, you can choose combined products.

The housing of the hood is not difficult to wash.

The case is washed with a sponge dipped in a cleaning solution. And wipe dry. If there is severe pollution, you need to shut off the gas supply. Then cleaning is carried out with a shumanit, wiped with a soft sponge and dried.

Contaminated elements are subjected to thermal and mechanical treatment.

Buttons and internal walls can be cleaned with special sprays. Or with a soap solution.The essence of the action: spray on the buttons, give time to act and rinse.

Recommendations

Of course, every family has its own rules and features for cleaning the house. Cleaning can be done daily, or maybe once a week. As for the kitchen hood, it does not require daily cleaning, even though it is used every day. But you should not start this moment, so as not to complicate your task.

It is also known that modern models use replaceable filters, which are enough to change every three months, which will save a lot of time and energy. But owners of older models should arm themselves with detergent and clean at least once a month.

In addition to the internal parts of the hood, do not forget about the outer hood. After all, it is also contaminated not only with fat, but also covered with dust. If you start this process, then it will be very difficult to wash the outside of the device. To avoid this situation, the surface of the hood should be treated with some kind of anti-grease agent. Individual greasy dots can be removed with a metal scraper.

Armed with all the above recommendations, you can safely proceed to the general cleaning of the kitchen hood, choosing the most suitable method for you.

Features of caring for devices with carbon cassettes

Standard filter for any hood - This is a reusable perforated plate or mesh made of aluminum or stainless steel. But there are models of catching devices equipped with disposable carbon cassettes. Such devices are not connected to the ventilation system, but operate on the principle of recirculation of air flows.

Filters in such hoods are installed immediately behind the traps.The carbon cassettes themselves are assembled in plastic cases. Their content is coal (in powder or granules). Of course, they cannot be washed or boiled - in a worn-out cassette, they simply change the liner to a new one.

The maximum working life of coal cleaners is 3 months. Then they stop functioning. However, if the hood is used intensively, the liners should be replaced more frequently.

Important: You can extend the life of the charcoal filter by leaving the hood running for a few more minutes after cooking. The air will dry the activated carbon in the cassette so it can filter further.

How to wash the extract from fat

Before you start cleaning the hood in the kitchen, it should be prepared for this. Accordingly, you need it:

1. disable;
2. Disassemble.

ATTENTION! Before starting the process, be sure to read the instructions for the hood. And don't forget to turn it off.

Otherwise, there is a risk of electric shock or short circuit.

The analysis of the hood for washing it is carried out in the following order:

• To begin with, the hood cover, which is located directly above the stove, is removed. To do this, just open the latches and the cover can be easily removed from the grooves;
• Only then the filter is carefully removed;
• Next, you should remove the pipe, which also requires cleaning;
• It is also necessary to remove the air filter;
• Externally, you need to inspect the body of the hood so that there are no contaminants on it.

ATTENTION! It is very important to find information about the air filter in the instructions for the hood. Not every type of it can be cleaned

The hood is very easy to clean. Any tool will work for this. You can even simply dilute the powder, soap or dishwashing detergent in water and wash off traces of grease with a sponge.After that, the entire surface is wiped with a clean cloth. But how to wash the hood mesh from fat is another question. There are many ways here.

How to clean the filter in the hood?

Filter cleaning from fat is the most laborious process. If the degree of contamination is not very serious, then you can use the simplest method. Prepare a large container that matches the size of the filter. Pour hot water into it and add any detergent that effectively dissolves fat. A filter is placed in this solution and left until the fat comes off.

Another simple method is to prepare a saline solution in which a metal filter is soaked. After 30 minutes, it is removed and cleaned with a brush. Remaining fat can be removed by rubbing the grate with citric acid. We recommend citric acid as an almost universal cleaning agent. However, it is not always effective.

If this method did not give results, then there is nothing left but to clean the hood mesh by boiling it. To do this, water is drawn into a large saucepan, into which half a bar of laundry soap and a few tablespoons of baking soda are added, and then put on fire and brought to a boil. A filter is placed in boiling water and boiled for 5-10 minutes. After that, the filter must be left in the container with the solution for several hours.

boiling grate hood

If the filter does not fit in the pan, then it should be boiled in parts, following this procedure with all its sides.

But even this method does not always help to achieve the desired results, and then there is nothing left but to clean the filter in the hood using more caustic preparations. One of them is ammonia, which is diluted at the rate of half a glass per 3.5 liters of water.

Before proceeding with this procedure, you should open the windows in the kitchen and put on a mask that protects against the strong smell of ammonia. A filter is placed in the hot solution and aged for several hours, after which the remaining fat is removed with a sponge or brush.

With very strong pollution, when the above methods are ineffective, there is another way to clean the filter in the hood by using one of the pipe cleaners. It should be diluted in a container with hot water, put on rubber gloves and lower the filter into the resulting solution. After 5-10 minutes, the filter grid is removed and thoroughly washed in running water.

Despite the fact that this method is the most effective, it cannot be used often, since the alkali present in such products can destroy the metal. Therefore, once the filter has been cleaned, it should be kept clean regularly.

Preparing the kitchen hood for cleaning

First you need to disassemble it. This must be done according to the instructions that come with the product. Carefully remove all parts that have been affected by the raid. If they are bolted, remove them and put them all together in a separate place so as not to lose them.

Sample instructions on how to prepare the hood for cleaning:

1. It is necessary to unplug the cord from the outlet to de-energize the device until you do this - you cannot disassemble the hood.
2. Using the instructions, remove the grease traps by unfastening the latches.
3. Remove the air line. In some hoods, this is not possible, in this case, just clean the places that are available.
4. Wash the external and internal areas of the device from plaque and soot.
5. Soak the filters in soapy water and clean with a hard sponge.
6. Dry all parts and reassemble.
7. Turn on the hood to the network, check the operation.

Cleaning the parts of the hood

Each detail of the hood requires an individual approach. Some materials do not tolerate aggressive solutions and become unusable. Before proceeding with the cleaning of a particular element, it is necessary to study the instructions and follow the recommendations.

How to wash the filter

It is not difficult to clean the grate and the base of the hood. Another thing is the grease trap. How to clean the filter in the hood in the kitchen is a complex issue and requires a careful approach. The part is designed to collect dirt, dust and grease and is the most polluted area of ​​​​the kitchen device.

First of all, make sure that the grease trap of your appliance is not damaged and can still work. In some hoods, the filters are disposable, that is, after a certain time it is necessary to replace the mesh inside and they cannot be washed. If the dirt on the cleaner is fresh, then it will not be difficult to remove it. Wash the filter in soapy water. If the fat is outdated, then take more drastic measures.

Ammonia for cleaning

Add a few drops of alcohol to boiling water and dip the filter into it. Leave for several hours, depending on the amount of soiling, then rinse thoroughly under running water. Alcohol is caustic and harmful to the human respiratory system.Therefore, it is recommended to clean with gloves and in a well-ventilated area.

Hull processing

A special grease remover in the kitchen will help clean the base of the kitchen assistant. Put the solution on a sponge and wash the hood inside and out. In this case, it is better to avoid hard brushes so as not to scratch the surface. Then wipe with a damp cloth and dry the surface. If you don’t have a specialized tool at hand, prepare the solution yourself from the following ingredients:

• 2 cups of boiling water;
• 6 large spoons of soda;
• 200 ml of silicate glue;
• a tablespoon of washing powder.

Combine all ingredients and mix thoroughly. Apply with a sponge to the surface of the hood and wait 30 minutes. Then rinse off the solution with warm water. A home remedy helps in the problem of how to wash the hood from grease in the kitchen, no worse than purchased solutions.

A duet of vegetable oil and soda will help clean the domed top of the kitchen assistant. Mix them in a 1:1 ratio and apply with a sponge to the surface. Dirt and grease will come off with soap suds. Wipe the surface with a damp cloth and dry with a towel.

The buttons or panel are best cleaned with an old toothbrush. Clean the dirt in the holes between the buttons with a toothpick or cotton swab.

How to wash the fan, motor and air duct

Over time, the air draft at the hood deteriorates, the cause of this is the pollution of the blower. If your device has a plastic pipe, then wash it with dish detergent. If the pipe is corrugated, made of aluminum or stainless steel, then cleaning will be more difficult. Much more dirt settles on the walls of such an air duct. There is a possibility that the pipe will need to be replaced.

All contaminated air after the filter passes through the fan, so the likelihood of contamination is also high. First of all, unscrew the part from the base of the hood and remove dust from the surface. Soak it in soapy water for half an hour. Then rinse in warm running water and dry. Once every 2 months it is necessary to clean the motor. Wipe it with alcohol and oil it. He will definitely thank you for it.

Household chemicals

In the most difficult cases, when all folk methods have not given the desired effect, it makes sense to try more aggressive substances.

A water pipe cleaner (usually concentrated alkali - work only with gloves!) will effectively get rid of the dirt that has appeared on the grease filter. The main disadvantage in this method is that it can be used no more than 1-2 times for the entire period of operation of the hood. If you use the cleanser often enough, the alkali that is part of the product can damage the metal surface.

The process of cleaning the grease filter in this way involves the use of rubber gloves, a stainless steel sink and pipe cleaner. The necessary amount of detergent is poured into the sink, the filter is placed for 5-10 minutes. Then the structure is washed several times under running water (until the solution is completely removed from the surface).

To cope with soot, which worsens the appearance of the hood, will allow one of the above methods. It will be much easier to remove grease from the surface if you treat the hood with detergent once every 2-4 weeks. It is easy to protect yourself while cleaning the grease filter by wearing rubber gloves.

When working with acids or alkalis, do not forget to open a window in the kitchen for ventilation. It will be very easy to wash off fresh grease using a regular dish detergent and a sponge. In difficult cases, it is important to scrape the top layer of fat with a sharp knife or spatula, and then remove the contamination with a suitable agent. Before cleaning the surface, carefully read the instructions on how to use the device correctly.

3 Summing up

The vast majority of the described methods of how to wash the extract from fat, including those described in our article, are based on alkali. This substance is quite aggressive towards metal elements. Naturally, they are effective, but they should be used with extreme care and do not forget about rubber gloves.

Grid before and after cleaning with the options described above

We sincerely hope that the methods described above will help extend the life of your household appliance. Remember, the design of the device and its compliance with the interior, the functionality is not as relevant as the cleanliness in the kitchen. Let comfort, beauty and grooming always rule the ball in your home!