How to wash a cast-iron bath without damaging the enamel: an overview of folk recipes and the best purchased products

My tile

To clean the tiles in the bathroom, you can use the following methods:

• vinegar - it copes well with limescale;
• laundry soap - it removes yellowness and has a whitening effect;
• soda ash - it dissolves well and does not leave scratches;
• store products - Mellerud liquid for tiles and stone (430 rubles), Help spray Clean bathroom (60 rubles), Cif anti-plaque bathroom spray (200 rubles), etc.

Compounds containing acid should not be applied to tile joints, as they can corrode the grout.

You can learn how to clean bathroom tiles here, and how to clean tile joints here.

How to clean rust

Rusty stains are the most persistent pollution of all possible. Household chemicals cope with this task only 3-5 times. In folk recipes, there are several ways that can help with this problem.

ammonia and hydrogen peroxide

You can clean any surface from rust with hydrogen peroxide. It is enough to add 200 milliliters of ammonia to 100 milliliters of peroxide, shake the mixture and apply to rust. Leave on for 20 minutes, then rinse off. If the stain does not go away the first time, you can repeat the procedure.

Vinegar

If there is nothing else at hand, then you can clean the rusty places on the enamel using natural apple cider vinegar. On the most contaminated areas, pour vinegar or put a soaked rag for several hours, then wash the bathroom with a regular product and rinse.

mustard powder

Mustard not only effectively copes with stains, but also has an antibacterial effect. For the cleansing procedure, it is necessary to mix it with soda in proportions: 15 grams of mustard + 15 grams of soda powder + 20 grams of grated soap. Pour everything with ammonia (2 tablespoons), mix. Next, clean the bathroom with this solution and rinse off the residue with water.

With soda

Soda brightens well, dissolves organic plaque and copes with hard-to-remove stains.Cleaning with soda powder: you need to mix the powder with water to a pulp, rub the surface of the bath, leave for a few minutes and rinse with water. Do not clean polymer surfaces using this method.

Clean bath from Sanox

Bath gels from Sanoks not only remove rust and other contaminants from the enamel, but also have an antibacterial effect. Household chemicals of this brand flavor the apartment, clean the surface of the bathtub to a shine and kill germs.

Ultra white by Cif

The Gif brand produces a wide range of cleaning products, including: creams, gels and sprays for cleaning the surface of the bathroom. Soft means effectively cope with pollution, smell delicious and do not injure the enamel. With old, stubborn stains, these products can only cope with a few times.

3 id="cilit-bang">Cilit Bang

Cillit Bang is a universal application. Available for purchase in two forms: gel and spray. Suitable for cleaning plastic and enameled materials. Delicately cleans rust stains, but does not perform well in cleaning the bath from a layer of lime.

Mister Muscle

Mr. Muscle releases various detergents. In order to remove old dirt and rust, you need to use the 5 in 1 formula. The liquid is suitable for any type of bath, as there are no abrasive and aggressive substances in the composition.

Santik

Santik is not a popular, budget tool, produced in the form of a spray. Santik has positive reviews, removes the greasy and organic layer, is able to defeat heavy pollution.

Wash every day: isn't it too much?

Caring for an enameled bathtub

Absolutely not, and an enamelled tub needs to be cleaned every time you use it. After the font has been cleaned, it should be wiped dry to prevent stubborn stains. The new enamelled bathtub is easy and quick to clean with specific industrial detergents based on baking soda.

In principle, home care for an enamelled bath may consist in treating it with simple soda used in everyday life and cooking. That's just applying the powder to the surface of the font is with a soft rag or napkin, but not a hard washcloth or even worse, a metal brush. Such care for the enamel of bathtubs will eliminate minor deposits of soap and greasy deposits.

Clean every week? Necessarily!

Before you clean your enamelled tub with your weekly deep cleaning, make sure you don't use a powder cleaner or one that contains abrasives.

In this case, the answer to the question of how to wash an enamelled bath from old and stubborn soap stains will be the purchase of special-made cleaning products. It can be various "Comets", "Pemoxoli" and others, in which there is nothing that could scratch or corrode the coating.

Is it possible to remove rust and lime deposits?

How to remove rust stains in the bathroom

The Achilles' heel of all enamelware is the susceptibility to the rapid formation and accumulation of lime deposits, especially when considering the quality of water in urban networks.To a greater extent, this problem is related to the composition of the water, but what kind of cleaners are used for enameled bathtubs, and how often the tub is washed, has its own effect on the rate of lime stains.

Cleaning bathroom enamel with lemon juice gives a simply amazing effect, and often the first time. To achieve a similar result, freshly squeezed lemon juice should be applied to the enameled surface, wait 7-10 minutes and clean with a soft nylon brush (although you can simply rinse it off with water from a shower head). If it was not possible to achieve the desired whiteness, you can personally prepare a warm solution consisting of citric or acetic acid. Cooking salt is added to it, and all this is applied to the walls of the font.

Hostesses have long invented their own, effective methods of how to clean an enameled bathtub from rusty marks. Usually, for these purposes, the same lemon juice is used, or wine vinegar with the addition of rock salt (a weak solution of hydrochloric acid). You can also wash enameled bathtubs according to the following recommendations:

• Take 100 grams of ammonia and pour 50 ml of hydrogen peroxide into it;
• Apply the substance to the rust stain;
• Leave for 15-20 minutes;
• Rinse and wipe with a soft sponge.

Folk remedies

You can quickly and safely deal with rust with the help of improvised means. The most unexpected and inexpensive compounds come to the rescue, including acetic acid, hydrogen peroxide, and even carbonated drinks like Coca-Cola, but for these funds to work, you must use them according to the instructions.

How to remove with acetic acid?

For cleaning, it is recommended to use an essence with a concentration of 70%.

Mode of application:

1. Place the instrument to be cleaned in a suitable container.
2. Completely fill it with acetic acid.
3. Close the container with a lid and leave for a few days. The more rust, the longer it will take.
4. After cleaning is complete, rinse the instrument in a solution of baking soda. It neutralizes acid.

After this treatment, you can continue to use the devices. Essence cleansing efficiency is very high. It allows you to cope with even a thick layer of rust. If it is small, then you can use table vinegar or lemon juice.

It is not recommended to use vinegar on aluminum tools as it will dissolve the epoxy layer and damage the metal structure.

If the rust on the tool has stuck in pieces, then the areas can be cleaned with ordinary food foil. It is used as a scraper.

Citric acid and hydrogen peroxide

You can get rid of rust with citric acid and pharmacy hydrogen peroxide. To prepare the solution you will need:

• citric acid - 20 g;
• peroxide - 15 ml;
• water - 100 ml.

Instructions for use:

1. All components are mixed with each other.
2. Put the tool in a suitable container, fill it with a solution.
3. Leave them for a day under a closed lid.
4. After the specified time, the solution is drained. The tool is washed with clean water, dried and used for its intended purpose.

During the cleaning process, the solution will become dark in color. This is the norm and indicates the effectiveness of the composition. With it, you can cope with a small layer of rust.

If the instrument is severely damaged, the concentration of the solution must be increased. In advanced cases, they refuse to add water at all, dissolving citric acid in peroxide.

The video will tell you how to remove rust with citric acid and peroxide:

How to remove Coca-Cola?

Coca Cola is a popular carbonated drink that can be used to remove rust. The effect is achieved due to the content of phosphoric acid in it, which corrodes oxides.

Mode of application:

• pour Coca-Cola into a suitable container;
• place rusty items in it;
• cover the container with a lid;
• leave for a day.

The next day, the part is removed, rinsed with clean water and dried.

Coca-Cola is one of the budget and effective rust removers. Sprite and Fanta have a similar effect.

Soda

Rust can be removed with baking soda. An alkaline solution will help get rid of a small layer of corrosion without harm to the metal. The effectiveness of the method is explained by the active action of sodium.

Mode of application:

1. Prepare the required amount of soda gruel by mixing the powder with water. It should be moderately thick, resembling pasta in consistency.
2. Using a sponge, apply the paste to the tool.
3. Leave the mixture to act for an hour.
4. Rinse the product and wipe it with a dry soft cloth.
5. If necessary, the procedure can be repeated.

Baking soda is not a highly effective way to fight rust, but a small layer can be removed this way.

zinc chloride

You can use zinc chloride to remove rust. Apply it as follows:

• 20 g of zinc chloride are dissolved in 200 ml of water, the agent is prepared in the amount in which it is necessary;
• pour the solution into a suitable container, lower the tool into it;
• leave to act for an hour;
• rinse the instrument with clean water and wipe with a dry cloth.

Zinc chloride contains free hydrochloric acid, which has the ability to dissolve rust. The main thing is not to overexpose the composition so that the metal itself does not turn black.

The method is quite effective, zinc chloride allows you to cope with even large areas of corrosion.

Preparing for cleaning: important points

Thinking about how best to clean the bath, first of all, it is necessary to build on the type of coating. Different materials react differently to pollutants, household chemicals, and exposure to alternative cleaners.

When choosing a cleaning method, it is necessary to take into account a number of points:

1. It is better not to experiment with an acrylic bath so as not to damage the glossy top layer. A definite taboo is the use of metal brushes, brushes and washcloths with a hard bristle. Under the ban and aggressive household chemicals.
2. Some products are designed for gentle cleaning. Such products are suitable for everyday care and maintaining the original gloss of plumbing, but “soft” preparations will not be able to cope with stubborn dirt.
3. Aggressive chemicals used for other purposes can destroy an enamel or acrylic coating in 3-4 applications.

Cast iron is more resistant to various influences.

However, here it is important to observe the measure. Acid compounds should be used in a dosed manner, and a metal brush should be completely abandoned.

The most "capricious" is considered acrylic plumbing. The coating quickly absorbs dyes and is very susceptible to mechanical stress.

6 ways to clean the bath from plaque and yellow stains

In order to qualitatively deal with such a type of pollution as yellow spots, one should understand the nature of their appearance. These places precede the formation of rust, and are formed due to constant, local contact with water. That is, if your faucet is leaking and constantly dripping on the same place, then the appearance of yellow spots is just around the corner. Limescale is formed due to the fact that the water is too hard and contains an increased concentration of chlorine. It is much easier to deal with them than with rust, the main thing is to eliminate them in time. Let us consider in more detail the recipes of the most effective methods.

Turpentine + mustard powder

To prepare the mixture, it is necessary to mix both components in a ratio of 2: 1, mix thoroughly. Apply the resulting mixture on the spots and leave for 10-15 minutes. Then rinse with warm running water.

table vinegar

In case of small pollution, table vinegar will come to the rescue. Take a full bath of water and pour in 1.5 liters of vinegar. Leave the tub filled overnight. In the morning, drain the water and wash the walls with a sponge and warm water. You can also moisten paper towels with a 6% vinegar composition and cover the entire surface of the bath or certain places with them and leave for several hours. Then rinse with running water and neutralize the acid with an alkaline solution.

Lemon acid

Citric acid will help to easily cope with yellow plaque. A bag of lemon should be dissolved in a glass of water. Using a sponge, apply the resulting solution to problem areas. Repeat the procedure at frequent intervals for two hours. After the stains are completely removed, rinse the tub with warm water.

Dry bleach

Mix dry bleach with water in a 1:1 ratio.You should get a thick slurry that needs to be applied to the dirt. After the mixture is completely dry, wash it off with warm water. Chlorine-based bleach is not recommended. It can adversely affect the enamel. The only exceptions are modern cast-iron bathtubs.

Lemon juice

Natural lemon juice squeezed onto a yellowed surface will help restore its original appearance. It should be left for 10-15 minutes and then washed off with warm water.

Borax + Vinegar

Mix borax (sodium tetraborate), which is sold in any pharmacy with table vinegar in equal proportions. With the resulting gruel, wipe the stain with a sponge until it disappears completely. Rinse with running water afterwards.

Also, mixtures based on soda and peroxide, described in paragraph 1, do an excellent job with yellow spots.

How to remove limescale

Limescale forms gray and yellow spots on the surface of the bathroom. Mineral deposits are firmly eaten into the enamel. Folk remedies will help to cope with such pollution.

Borax and Vinegar

Borax well brightens yellow spots. A mixture of lemon juice with this remedy will help remove even old dirt:

• mix lemon juice with borax until a paste forms;
• apply to the stain;
• leave until completely dry;
• rinse with water.

Salt and warm vinegar

It is recommended to mix 100 milliliters of warm table vinegar 9% and half a glass of soda powder. Clean the bathroom with a regular sponge and rinse off the solution.

Salt and turpentine

A mixture of turpentine and table salt copes with rust stains and limescale. For cleaning, it is necessary to moisten the walls with bath water, apply a thin layer of salt on top, moisten a sponge with turpentine and rub the surface of the bath.Wash off the salt and turpentine from the walls, then you need to wash the bathroom using ordinary detergents.

2 Cleaning and maintaining the new bathroom

Under these conditions, the most important questions are: how to wash a cast-iron enameled bathtub and how to maintain this cleanliness? Daily thorough cleaning of the surface and timely action to clean stains is the possibility of long-term maintenance of whiteness.

In order to protect the bath from yellowness, certain rules must be observed:

1. The use of soft sponges and brushes with polymer bristles.
2. Removing soap stains with a rag after each appearance.
3. Wipe water spray dry.
4. Do not place metal objects in the bath.
5. Treatment of the enamel coating with liquid soap 1 time in 3 days.
6. Reliable ventilation to reduce overall humidity; Do not allow water to leak from the faucet into the tub.

Rules for the care of a cast-iron bath

Overview of specialized tools

The coating of the cast-iron bath is afraid of mechanical damage. In order to wash tiles, plumbing uses abrasive substances, but they are not suitable for enamel, they can damage it. It is worth using liquid or gel-like:

• "Phenolux" - a gel that copes with soap stains, rust;
• "Sif" - it happens in the form of a cream, spray. Apply to the surface of plumbing, wash off after five minutes;
• "Komet" - gel, spray. After application, it forms a film on the cast-iron bath, protects from contamination;
• "Sunnox" - a wide spectrum of action. Fights old dirt, rust, any kind of plaque on the bath, grease, organic matter. Kills E. coli;
• "Tim-pro" - an organic remedy, quickly removes fresh traces of soap.

How to clean an iron font so as not to damage the enamel?

Steel baths, however, like cast iron, have an enamel coating. Therefore, in general, cleaning products for cast-iron models can also be used to care for metal fonts. But there is one thing, the enamel on steel bowls has a thinner layer and is more prone to cracking and chipping - therefore, it is advisable to completely limit the use of products with hard abrasive.

Daily care

If you monitor the coating of the font every day, then you won’t have to clean it from serious pollution. What is the best way to take care of her?

Below we present the easiest and most economical way, which will take you a maximum of 20 minutes a day:

1. moisten a soft sponge and rub it with ordinary laundry soap until a thick foam is obtained;
2. apply the resulting composition to the surface of the font, periodically repeating step 1;
3. leave the bath in this state for 15-20 minutes so that particles of dirt and grease move away from the coating;
4. rinse the bowl thoroughly to completely wash off the composition;
5. wipe the enamel with a soft cloth to give it a shine.

Such a simple procedure will allow you to enjoy the appearance of the font for many years.

Overview of cleaning products

Let's take a look at time-tested cleaning products that are great for a steel enamel bath.

"cif". A very popular product that can be used not only for cleaning bathtubs, but also for tiles and even stoves. This composition is sold in two versions - a cream and a spray. Both of them are great for washing enameled bowls, they are good at removing grease and rust. Their main difference is ease of use.The spray can be quickly sprayed over the entire surface, while the cream will still have to be rubbed with a sponge.

But many housewives forget that it is better to work with sprays in respirators!

Spray particles, due to their volatility, can very easily enter the lungs. This can lead to an allergic reaction. Therefore, it is better to wear a respirator before performing work.

"Acrilan". Despite the fact that this product is usually used for cleaning acrylic bowls, it can also be used for washing enameled metal products.

The composition forms a thick foam, which effectively copes with limescale and chronic pollution.

Its peculiarity is that after rinsing the foam, a protective layer remains on the bath, which prevents the coating from becoming dirty.

"Silit". This composition is the best in the fight against rust. But due to the content of hydrochloric acid - it is better to use it no more than twice a month.

"Forsh". The manufacturer positions this tool as environmentally friendly and contains natural ingredients. Of course, it is not as effective as previous analogues, but it copes with ordinary pollution quite easily.

Does vinegar corrode enamel?

Consumers often have a question: is it possible to clean an enamel bath with vinegar? There are several nuances here. Vinegar is an acid and works great on limescale. To do this, you need to dilute 7% vinegar with water and apply it to the contaminated surface.

Leave such a composition for 2-3 hours, but in no case longer. Otherwise, it may adversely affect the enamel coating.

After the required time has passed, wipe the coating with a sponge and rinse thoroughly with water.If the plaque does not go away, it is allowed to use the hard side of a soft sponge and rub more intensively.

What and how not to wash?

As mentioned above, it is strictly forbidden to use detergents with high abrasiveness for the enamel coating, such as, for example, Pemolux.

Another enemy of steel bathtubs is hard metal sponges. They will certainly help you get rid of deep stains, but they will also peel off the enamel layer. Pollution is best softened with cleaning products, and then rubbed with a soft sponge.