How can you clean an acrylic bath at home

What means to use?

Acrylic baths are best maintained with mild detergents, such as those used for washing dishes. Liquid and regular soaps also work well.To clean the bath, you can rinse out the old bottle of shampoo or shower gel that has run out, because they usually still have a lot of money left on the walls. Such soft formulations can be left on the surface of the bath for a long time without the slightest risk of damage.

How to clean an acrylic bath if it has faded and turned yellow? To restore her shine, after washing, she is lubricated with polishing compounds.

Powders like Pemolux, Biolan and Comet, which are cleaned precisely due to mechanical friction, are not recommended. Then the question arises: is it safe to clean an acrylic bathtub? The effect of liquid and paste products is based more on the chemical removal of contaminants, so they can be used without the risk of damaging the surface. However, they usually contain substances that are quite aggressive for the skin, causing irritation and allergies, so it is better to clean the bathtub with rubber gloves.

So, how to wash an acrylic bath if preference is given to industrial products? There is a group of products that have proven themselves in practice.

1. Bass is a liquid cleaner used to clean bathtubs and showers at home.
2. Cif is a universal product for all bathroom surfaces.
3. "Acrilan" - as the name implies, this is a special product for acrylic bathtubs and other similar surfaces. It is produced in the form of foam and perfectly copes with mechanical, chemical and biological pollution and yellowness.

What means definitely should not be cleaned:

• abrasive substances;
• hard metal brushes;
• products with a high content of ammonia, bleach, acetone or formaldehyde.

How to wash limescale in the bathroom - selection of funds and preparation for cleansing

A lime-type plaque will certainly appear on plumbing items, namely on the toilet bowl, faucets, sink, and also on the bathroom. The reason for this is hard running water, which contains a lot of sodium and calcium salts. The binding element for the formation of plaque is particles of fat that, when washed, enter the water. Such deposits will adhere strongly to the walls of the surface, and are almost impossible to wash off with ordinary soap and water.

To remove limescale from a shower or bath, you should know a couple of tricks:

Even if low-abrasive powders can be used to clean the surface, it is better to make them gruel by simply adding water to the bottom of the bath

So there will be less dust from the powder, and the effect on the enamel will be delicate.
It is important to carefully remove plaque from an acrylic bath and in no case should coarse abrasives, acid cleaners and chlorine-containing compounds be used. There are special soft gels on sale that save acrylic, and also remove dirt and plaque without the negative effects of the latter.
Aggressive products, which include nitric and sulfuric acid, are best excluded or left for special cases and strong coverage.
For a mechanical effect, even on large growths, it is better to use only soft brushes and sponges, but not metal scrapers, wire sponges, sandpaper and similar items.

Yes, they can ruin even the most durable bathing containers, and even more so acrylic ones. From scratches and holes on the surface, dirt begins to quickly accumulate, bacteria develop and black mold appears.
Plaque begins to accumulate on the walls of plumbing constantly, and after a while it passes from the film stage into large and rough growths. "Water stone" is an age-related lime deposit, and adheres firmly to the surface, and also has a high level of density, so it will be impossible to remove it without damaging the enamel. For this reason, it is important to regularly care for plumbing items.
Industrial products based on organic and alkaline solvents can be used, but certain rules must be observed when working with chemicals - you can only bleach steel bathtubs or cast iron, and if the enamel is not more than 20 years old, it is also imperative to carry out all work in protective gloves and ventilate the room.
Gels of industrial production can not be rubbed, but even distribution will be enough.
Terry cloths and microscopic fibers are used for the final cleansing. They will help to gently polish and erase small impurities.
After cleansing, simply rinsing the bathtub or shower tray is not enough, it is recommended to fill everything with cold water, and then drain it. This will remove all lime deposits and cleaning agent.
The more sensitive and thinner the coating, the more often it needs to be cleaned. For example, if we are talking about acrylic baths, then the frequency of procedures is 1 or 2 times a week, if it is regularly filled. If swimming is not accepted in the family and everyone takes a shower, then general cleansing can be carried out 1-2 times a month.

The stronger the enamel, the easier it will be to wash the limescale in the shower - in this case, a strong impact of the mechanical type is allowed, as well as the use of small abrasives, aggressive industrial-type products.If the plumbing is fragile, then it is better to use more gentle methods and folk remedies.

How to wash an acrylic bath - tips and tricks

How to wash an acrylic bath so that it does not change its appearance, serves for a long time and pleases the eye with its unsurpassed appearance. In view of the fact that acrylic bathtubs appeared on our market quite recently, many people ask themselves the question - what means to wash such bathtubs and how to properly handle them. There are no big difficulties in the procedure for washing an acrylic bath. The main thing here is to follow the rules of cleaning.

We are all used to bulky and heavy cast iron bathtubs, and acrylic bathtubs, which are elegant in their shape and quite light, at first glance seem fragile and impractical. That is why, many are wary of plumbing, which is made of acrylic.

Features of washing and caring for an acrylic bath

Unfortunately, many do not yet know the basic rules for the care of acrylic. It is worth noting that the surface of an acrylic bathtub requires more careful maintenance and therefore you should familiarize yourself with a number of rules for the care of this material. By following the basic rules for care, you will be able to extend the flawless appearance of your bath.

Acrylic is a durable material. Its surface has a dirt-repellent effect, due to which microorganisms do not develop on it. In addition, the acrylic bathtub is not afraid of impacts, but it is easily scratched.

Features of washing an acrylic bath

The main thing is to be careful and careful when washing an acrylic bath. It is not recommended to use powdered and abrasive products, as well as paste containing chlorine, acid, alkali, and ammonia as a washing agent.

Such substances contribute to the appearance of scratches on the surface, and also lead to the loss of natural color. Always carefully read the ingredients of the cleaning agent you use before cleaning your acrylic bathtub. Do not use metal and hard brushes - such brushes violate the integrity of the acrylic coating.

It is also not recommended to bathe your pets in an acrylic bathtub, put metal basins and buckets in them. Never put various objects in the bathroom - stools, metal basins and objects, as well as any other household utensils.

What improvised means can be used to wash an acrylic bath

To properly care for an acrylic bathtub, you must use a liquid with a cleansing effect as a washing agent. For this purpose dishwashing detergent, liquid soap, shower gel, etc. are excellent.

If you find lime streaks on the surface of the bathroom, then it is not necessary to wash the entire container completely. It is enough to take a soft cloth, soak it in lemon juice or table vinegar and wipe the surface.

If you notice that some areas of the bathroom surface begin to darken, then it is enough to rinse the container with running water and wipe it with a dry and soft cloth.

If there are minor scratches in the acrylic bath, then its surface can be treated with a polishing material, in particular, it can be ordinary mastic. Furniture polish or car polish is often used for this purpose.

Special products for washing acrylic baths

The current level of development of the chemical industry has made it possible to develop special tools, thanks to which an acrylic bath can retain its original appearance for a long time. At the same time, with such means, any acrylic container is washed quickly and safely. I would especially like to highlight such funds as Acrylan, Cillit, Sarma, Acryl-Net, Star-Acrylat.

These cream-gels are specially designed for washing acrylic surfaces. The agent is applied to a napkin and only after that to the surface of the bath. The entire surface of the container is wiped with a napkin and left for 5 minutes. After 5 minutes, the product should be washed off well with warm water and wiped dry with a cloth.

To wash acrylic bathtubs, you can use universal products. The most popular all-purpose cleaner for acrylic surfaces is Ravak. It was developed using a special technology and is intended for washing acrylic surfaces.

In order to qualitatively get rid of the appearance of rust, it is recommended to use products that are designed to combat rust specifically from acrylic surfaces.

In any case, when choosing a product for washing an acrylic bathtub, always give preference to special products. Such products will not only gently clean the surface, but also give it shine and protection, in the form of a thin waterproof film. Now you already know how to wash the acrylic surface and you can provide it with proper care and increase its service life.

How to remove with special compounds?

It is easier to choose ready-made concentrates and solutions of household chemicals, since the manufacturer indicates on the label for the surfaces from which material they are intended. The owners recommend:

1. Bagi Acrylane is a versatile bath foam spray made of any materials based on surfactants and citric acid. Effectively fights lime deposits, pollution of any degree and nature.

   It is enough to apply on the surface and rinse with water. Additional processing with a sponge is not required. The price for 400 ml is 400 rubles.

2. Clean Home is an anionic surfactant-based bathroom cleaning gel suitable for all surfaces. Removes lime deposits, rust, unpleasant odors, disinfects. Does not cause allergic reactions. The price for 800 ml is 200 rubles.
3. HG - concentrate for baths and toilets, effectively removes plaque, rust in a few minutes. Can be used on any surface, based on surfactants. The price for 500 ml is 450 rubles.

Cleaning an acrylic bath with folk remedies

If you are not impressed with household chemicals, you do not want to spend money, and there is little sense in these funds - try using folk methods for cleaning an acrylic bath. Most of them have been tested over the years and help to cope with most of the problems that arise when operating such delicate plumbing.

• Citric acid will help get rid of limescale and whiten the bath. To do this, you need to take hot (not boiling) water into the bath, then pour a packet of citric acid into it and leave it for two hours. After that, drain the water, rinse the tub with plenty of water and wipe dry with a cloth. This procedure is recommended to be carried out no more than once every six months.
• To get rid of various stains, try applying toothpaste with a whitening effect on them and rub it over the problem area with your fingers. Leave the paste on the surface of the tub for a few minutes, then rinse with water and pat dry.
• With a solution of soda and soap, you can get rid of most contaminants. To do this, apply the solution to problem areas, leave for 20 minutes, then rinse with water. Do not forget to wipe the bath after each water procedure.
• A solution of ammonia and hydrogen peroxide will help to overcome rust. To do this, mix them in the same proportion, take a sponge, soak it in this solution and wipe the problem area. As a rule, the effect will not keep you waiting.
• In the event that the bath is too dirty, this can be corrected with vinegar. To do this, draw hot water into the bath and add a liter of ordinary table vinegar to it. Leave the water in the bath for 12 hours, then drain and rinse with plenty of water, then wipe the surface of the bath dry.

The effect of one method or another may be different. It depends on your bathtub, the correct operation of it and the composition of the water that enters the plumbing. Someone can help any of these methods, but someone will not be lucky with any of them. This is an individual indicator, so do not rush to scold the tool in case of failure. As a last resort, if you perform elementary acrylic bath care instructions, then you will not have to resort to cleaning it from stains or rust. Below is a video with details.

Features of removing various contaminants

Depending on the type of pollution, you need to use different compositions. This improves cleaning efficiency.

limescale

You can get rid of limescale with citric or acetic acid. Do not use too concentrated solution for processing.If the layer is old, then for 1 glass of water you need 1 sachet of citric acid or 2 tablespoons of vinegar.

The product is applied to the spots and left for 20 minutes. During this time, the dirt must be moistened periodically. Wash off with warm water. If necessary, repeat the procedure. If it was decided to use household chemicals, then it should contain citric or oxalic acid.

Soapy

You can get rid of soap scum with baking soda, vinegar and water. They are used in the following way:

1. Soda is diluted with water to a paste state and applied to stains.
2. In a spray bottle, table vinegar and water are mixed in equal proportions.
3. The resulting solution is applied to dried soda and rubbed with a soft brush.
4. Wash off with clean water.

If there is no desire to use improvised means, then you can purchase any universal composition that is designed to care for acrylic bathtubs. All of them are able to remove soap scum.

Mold

Hydrogen peroxide helps fight mold. Use it like this:

• soak a sponge with peroxide;
• treat it with areas where mold has appeared;
• leave for an hour;
• carry out re-processing;
• rinse off with hot water.

In addition to the fact that the pharmaceutical preparation will destroy the fungus, it will also whiten the yellowed places. When choosing store formulations, you need to purchase a product marked “antibacterial”.

Yellowness

To get rid of yellowness, you can use the following means:

1. A mixture of soda ash and baking soda. They are combined in equal proportions, applied to yellow areas and poured with table vinegar. After an hour, the product is washed off.
2. Ammonia. It will take at least half an hour to make an impact.All this time the door to the bathroom should be open.
3. A mixture of washing powder with bleach in the composition and grated laundry soap. The components are diluted with water to a mushy state and applied to the yellowed areas for an hour.
4. Hydrogen peroxide. It has strong whitening properties.

yellow rust spots

You can get rid of rust with Coca-Cola. This unique tool will not damage acrylic, but it will perfectly dissolve rust.

Use it like this:

• the bath is rinsed with water and dried;
• put cola on a rag and apply it in the form of a compress on rusty spots;
• as the rag dries, it needs to be moistened;
• after 3 hours, the bath is rinsed with clean water.

During this time, the rust will dissolve and be easily washed off the treated surface.

Cleaning an Acrylic Whirlpool Bathtub

At the hydromassage, it is important to clean the spray nozzles through which water flows out under pressure in the given directions. The nozzles are connected to the circulation pump

He creates this pressure. Drops of water remain on the nozzles, which provokes the appearance of mold, salt deposits.

The hot tub is cleaned once every 30 days. In parallel, the surface is disinfected.

• The tank is filled with warm liquid so that its level exceeds the location of the nozzles by 7 cm.
• The air supply function is turned off.
• Dishwasher detergent (50 ml) is added to the water.
• One glass of vinegar acts as a disinfectant, which is also added to a container of water.
• The hydromassage mode is activated for 15 minutes. During this time, dirt should be removed from the small holes of the nozzles.
• The hydromassage is turned off and the drain hole of the bath is opened. All dirty liquid will come out.
• When the bowl is empty, the drain hole closes again and water is drawn into the font again.
• The hydromassage function is activated. At this point, the nozzles are washed out of the detergent.
• After 10 minutes, the liquid descends into the sewer.
• The walls of the tank are wiped dry.

Home Care

In order for the bathtub not to lose its impeccable glossy sheen, it should be regularly washed and cleaned with special products. Some of the options offered by the market are quite expensive. Therefore, economical housewives prefer to use home-made products to wash the bowl from various kinds of pollution.

Washing folk remedies

In order to save money when buying special equipment for plumbing care at home use various tricks and even products

If you decide to borrow this way of getting rid of dirt in your bathroom, you should pay attention to the features and characteristics of acrylic

It is strictly forbidden to use the following options to remove stains, stone, rust and other contaminants of a polymer bath:

• boiling water or steam;
• washing powder;
• metal scraper;
• chlorine, formaldehyde;
• alcohol, oxalic acid;
• various solvents.

All this will help get rid of not only dirt, but also the acrylic layer. From boiling water, even 6 mm bath coating is deformed. Moreover, you need to carefully monitor the temperature of hot water - it should not exceed 60-70 degrees.

Among home methods and products for cleaning plumbing, there are quite safe for acrylic surfaces. These include weak solutions of citric acid, a solution with soda, toothpaste, acetic acid.

According to the reviews of many housewives who have tried folk methods of dealing with dirt on the surface of an acrylic bath, they do not always live up to expectations.

As the product owners say cast acrylic, the use of sponges with a hard surface does not leave marks on the surface of such products. But for washing cheaper models with a 2 mm layer of acrylic, it's not worth the risk.

Bath cleaning technology

To maintain the external shine of the acrylic coating, it is enough to regularly care for the product. After completing the water procedures, wipe the surface of the bath with a sponge with soapy water, Fairy or other dishwashing detergent.

After 2-5 minutes, rinse everything with water and wipe dry. But this is not always possible - in the morning after taking a shower, you need to run to work, and there is no time left to take care of the bath.

In practice, all procedures are performed, as a rule, once a weekend. And it can be quite difficult to cope with a weekly raid - you have to make every effort to wash everything, especially when there are a lot of salts and other impurities in the water.

In order for the bath to sparkle with cleanliness, the following procedures should be periodically performed:

• wash every evening with soapy water, rinse and wipe the surface dry;
• use a special polymer care product once a week;
• rub the surface with a polish intended for acrylic, 1 time in 2 weeks;
• for a jacuzzi - disinfect and wash the hydromassage equipment once a month or two;
• remove stains immediately after their formation;
• repair scratches as they appear using a repair kit.

To clean the hydromassage equipment, it is better to use special disinfectants.It is dangerous to use a chlorine solution - the acrylic coating of a particular bath may react poorly. As a result, you will have to buy a new bath.

A bathing container without additional devices does not need to be specially disinfected - it is enough to regularly use a cleansing emulsion / cream or gel designed for acrylic.

Acrylic bathtub quality maintenance technology consists of a series of sequential processes.

It is quite convenient to wipe the acrylic bathtub with a cotton cloth. It perfectly absorbs small droplets remaining on the surface and does not leave streaks.

The best toilet bowl cleaners for rust

Rusty stains on the walls toilets spoil the whole view plumbing and toilets in general. The problem appears due to poor-quality water, a malfunctioning drain, and a number of other reasons. In any case, to remove rust, you need special cleaners.

Nordland Lemon - active foam for cleaning the toilet

5

★★★★★
editorial score

91%
buyers recommend this product

See review

Nordland is a foam for cleaning toilets, bidets and urinals that copes with lime and urolithiasis, rust stains and other contaminants. The unique form of the product is convenient for application - lush foam penetrates into hard-to-reach places, destroys all bacteria and microbes. The housewives note that the product perfectly removes unpleasant odors, leaving only a pleasant lemon scent after cleaning.

The hypoallergenic formula consists of natural ingredients without the addition of harsh chemicals - after use it decomposes by more than 90%. After cleaning, a protective film remains on the walls, which allows plumbing to stay clean longer, preventing the development of bacteria.

For cleaning, it is enough to apply foam for 5-10 minutes and distribute it over the entire surface, it does not require additional efforts.

Pros:

• antibacterial effect;
• biodegradable formula;
• convenient release form;
• pleasant aroma;
• does not cause allergies;
• economical consumption;
• effectively removes plaque, rust and other contaminants.

Minuses:

expensive - 300 rubles for 500 ml.

Buyers of this tool were divided into 2 camps. The former note that, having tried Nordland foam, they will no longer return to ordinary gels. Others, on the contrary, considered this format extremely inconvenient and prefer standard liquid and gel products.

Sanfor Activ "Antirust" - a fast-acting toilet bowl cleaner

4.9

★★★★★
editorial score

89%
buyers recommend this product

Sanfor Activ "Antirust" - a tool for intensive cleaning of plumbing. The composition of the product is extremely effective: it contains a complex of acids, alkalis and surfactants that cope with drips, rust, plaque and microbes. To obtain a visible effect, 1 minute is enough - the pollution dissolves literally before our eyes.

There are no chlorine-containing substances in the composition, so the smell of the product is not too caustic. This allows the cleaner to be used on stainless steel, chrome and other finicky surfaces. The liquid is sold in 750 ml bottles with a narrow spout for easy application. The lid is child-resistant and reliably prevents liquid from leaking.

Pros:

• antimicrobial action;
• dissolves plaque and rust;
• super fast effect;
• affordable price (from 70 rubles per bottle);
• child-resistant lid;
• no pungent odor.

Minuses:

• high consumption;
• hard to find for sale.

Sanfor Activ "Antirust" is not intended for regular cleaning.It is taken to clean old deposits and the most difficult contaminants. Due to its too liquid consistency, it quickly slides down the walls and the consumption is extremely uneconomical.

Domestos "Anti-rust and Anti-plaque" - the most effective gel

4.8

★★★★★
editorial score

80%
buyers recommend this product

Domestos "Anti-rust and Anti-plaque" is an acid-based gel for removing old dirt on the toilet bowl. It is recommended to use it during the general cleaning of plumbing. The thick formula allows the cleaner to contact the surface for a long time and cope with stains even under water.

To eliminate rust, the product must be left on the surface for half an hour. You don’t need to scrub the toilet with a brush, just rinse it with water - the stains will go away along with the remnants of Domestos. The gel is sold in black plastic bottles of 0.75 and 1 liter, which have the usual narrow spout for application under the rim.

Pros:

• effectively cleans stubborn dirt and plaque;
• does not require mechanical cleaning;
• works underwater;
• disinfects;
• available in most stores.

Minuses:

• cannot be kept for too long;
• not suitable for chrome parts;
• acrid smell.

If you leave Domestos for a longer period, you can ruin the surface of the toilet. Many housewives note that the bright blue dye is eaten away, and it is extremely difficult to wash it off later.

Basic rules for cleaning the bath

How to properly clean an acrylic bathtub

In order for the bath to remain attractive longer, the main thing is to follow certain rules:

1. It is impossible to put heavy objects in an acrylic bath, they can damage the surface, leave marks and scratches.
2. After each use of the bath, the surface should be rinsed with warm water.
3. After cleaning, the surface of the bath should be wiped dry.
4. Do not use chlorine, ammonia or acetone as cleaning agents.
5. Do not soak laundry in the bath.
6. Also, if you bathe a pet in the bath, it is worth using a bedding to avoid scratches from their claws.
7. Acrylic bathtubs should be washed every ten days using chemicals, and aggressive cleaners should be avoided altogether.

Only gentle products should be used to clean the bathtub. This is how you extend the life of the acrylic surface.

Regular maintenance of the bathroom allows you to keep the model clean for a long time, as acrylic surfaces have dirt-repellent characteristics. And to give the bath a shine, it is wiped with pieces of soft cloth.

Cleaners for acrylic bathtubs such as Acryl Star, Bass, Cif, Mellerud, Triton, Ravak, Sun Clean and so on are perfect.

Acrylic bath care

Let us consider in more detail how to clean the bath from certain contaminants and take care of it in everyday life.

How to whiten a bathtub and remove yellow plaque

After a couple of baths, a yellowish soapy coating may form on the walls of the acrylic bath. If you clean it regularly (at least once a week), you can get by with minimal effort. It will be enough just to moisten the walls of the bathroom with hot water, and then with a sponge dipped in dishwashing detergent, walk over the entire surface.

If the soap scum and yellowness have managed to eat in, then use one of the professional tools for cleaning plumbing. Apply the product on the damp walls of the bathroom, rub with a sponge, evenly distributing the foam, leave to act for 10-15 minutes and rinse thoroughly.

Getting rid of mold and mildew

Get rid of mold and mildew you can use bleach:

1. Pour undiluted bleach into a spray bottle and treat the affected area.
2. Leave on for 10-15 minutes, then rinse with warm water.
3. A very important step is to thoroughly dry the treated area. Moisture is a mold's best friend, but it will be difficult for it to return to a dry area. To do this, you can use a dry waffle rag, and then - a regular household hair dryer.
4. Treat the area with an antifungal agent to prevent mold from reappearing.

Removing residual sealant

Silicone sealant is a complex contamination, which is unlikely to get rid of the first time. To remove it from an acrylic bath, use one of the special tools. Each of them has its own method of application, described in detail in the instructions. Among the most popular means for removing silicone sealant are the following:

• Lugato Silicon-Entferner;

  Lugato Silicon-Entferner is a thick paste that corrodes the silicone compound of the sealant.

• Soudal Silicone Remover;

  Soudal Silicone Remover has a gel formula and an unobtrusive odor

• Penta 480.

To remove sealant from an acrylic bath, do not use mechanical methods, such as peeling with a knife, scraper or stack. This approach will damage the coating and leave deep scratches.

Stain removal

Even a weak solution of manganese leaves noticeable stains on the acrylic surface.To get rid of them, use the following method:

1. Mix hydrogen peroxide (50 ml) with citric acid (1 teaspoon).
2. Apply the mixture to a soft sponge and rub gently. The sooner you start removing the stain, the less effort you have to spend.
3. Thoroughly rinse the remaining solution from the surface of the bath with cold water.

Disinfection of acrylic bathtubs

Despite the fact that acrylic is not the most favorable environment for the reproduction of bacteria and fungus, annual disinfection with professional preparations will not be superfluous:

1. Fill the tub with water at room temperature.
2. Dilute the disinfectant in it according to the instructions on the package. Mix thoroughly.
3. Leave on for 15-20 minutes to work.
4. Drain the solution and rinse the bath thoroughly.

For disinfection, you can use drugs such as Grass, Synergy, Eucaliptic. Disinfectants are usually quite expensive (about 1,000 rubles per pack), but they are sold immediately in large canisters, which will last for several years.

How to make your own bath cream?

Folk remedies made from improvised ingredients will completely replace professional cleaning products. acrylic bathtubs. One of the simplest recipes. It is necessary to prepare half a liter of hot water, 15-20 g of baby soap, 100 g of soda, aromatic oils for smell.

We rub the soap on a fine grater, fill it with water and insist. After a few hours, mix the thick soapy solution with soda. For aroma, add a few drops of tea tree oil, bergamot, orange or lemon.

Soak a soft cloth or sponge with the resulting composition and carefully wipe the surface of the bath.Leave for half an hour, then rinse - cleanliness and a pleasant smell are guaranteed. The home remedy does not harm acrylic and is absolutely safe for the skin of the hands.

Helpful Care Tips

If you follow the rules for operating an acrylic bath, then there will be no problems with the coating, as well as minor scratches. But unfortunately, it is not always possible to follow the recommendations. Firstly, pets - it is not always possible to equip pets with a separate washing room.

So you have to put up with them in one bathroom, using an acrylic bath as a container for bathing animals and for receiving water procedures for all family members. Therefore, you should purchase a repair kit in advance so that it is at hand at the right time.

Secondly, you need to be extremely careful when cleaning faucets - choose a product that will be safe for the bath. After all, random drops of an aggressive liquid can well spoil the impeccable gloss of acrylic.

Thirdly, be sure to use protective gloves - any, even the most harmless, remedy can harm the delicate skin of the hands.

Fourth, when buying a new acrylic cleaner, it's a good idea to test it on a small piece of tub to make sure it doesn't damage the tub's acrylic layer.

The fifth tip is that if you need to collect water in a basin or bucket made of metal or plastic, then it is better to put it on the floor and fill it using a shower head.

Sixth, if colored splashes get on the acrylic surface of the bowl, for example, when washing off hair dye, children's gouache or other colorful substance, you should immediately remove them using your arsenal of bath detergents. A stubborn stain will be much more difficult to remove than a fresh one.

Helpful tips will help you avoid many problems and keep the attractiveness of the bath.

When choosing special means, you need to pay attention to whether it is a substance in the form of a cream, gel, oil, suspension or liquid. Moreover, solid inclusions, aggressive acids and solvents should not be in the composition of the correct acrylic care product. Another important tip is to choose the type of product that matches the nature of the pollution.

So, a gel to combat limescale with stains from rusty water is unlikely to cope.

Another important tip is to choose the type of product that matches the nature of the pollution. So, a gel to combat limescale with stains from rusty water is unlikely to cope.