Rating of pumps for drip irrigation: TOP-12 best offers + recommendations for buyers

Criteria for choosing a shop drip irrigation system

If you decide not to bother with the independent manufacture of the system, but to buy a ready-made one in the store, you will find a huge selection of all kinds of devices with different levels of functionality and prices. In general, the cost of such systems is low, and therefore any summer resident or gardener can afford the installation of automatic drip irrigation.

Before you go to the store, you must first decide on your needs, namely:

• do you need maximum autonomy, or are you ready to put up with the periodic filling of tanks and the independent start-up of water without a timer;
• where you want to use the purchased system. It can be both open ground and a greenhouse, flower bed or greenhouse. Some models are effective only for their places of operation;
• What irrigation area do you expect and how many plants do you want to cover with an irrigation network? Some sets are very modest and suitable for small needs, others, on the contrary, allow you to turn around to the fullest;
• whether you need durability, or you are willing to buy an inexpensive set for several seasons and then replace all components after they are deformed.

By answering these questions, you will know exactly what kind of automatic irrigation system you need. If you rely on autonomy, you should choose plumbing systems that can take irrigation water directly from the high pressure network and work on an electronic timer. If you need a small greenhouse system, simple options costing less than 1000 rubles are suitable, designed for a short length of beds and a small number of plants. If you have a whole garden that needs watering, then you will have to look for more powerful counterparts with many lines and droppers.

From the technical parameters, we recommend paying attention to the following points:

• Tape pitch is the distance between the holes that bring water to the root system of an individual plant. An important parameter, since the frequency of planting your seedlings depends on it.
• The thickness of the tape - not only the throughput of the system, but also its durability depends on this parameter. Tapes with a larger diameter are generally more reliable and resistant to the environment.
• Working pressure - some systems are not designed for high pressure. If your water supply network has an increased pressure, you must take this into account when purchasing the product.
• Water consumption - the maximum possible water consumption per dropper. Based on this parameter, it is possible to calculate how much water will be required for irrigation and at what rate it will be consumed.

Types of pumps for irrigation

Consider all the main types of household pumps used for irrigation of small summer cottages and garden plots.

type of instalation

As mentioned above, depending on the installation location, pumps are divided into surface and submersible:

Surface equipment is called equipment that is installed next to a water source or at some distance from it. A suction hose is lowered into the source, and the device itself is on the surface, which is very convenient for its operation. You can install such a pump for irrigation from a barrel, well or reservoir, but it is not suitable for pumping water from a deep artesian well, since the lifting height does not exceed 8-9 meters. The advantages of such models include ease of maintenance, mobility and low cost, and the disadvantages are noise.

Surface pump installed near a pond

In the photo - a check valve with a strainer

Submersible pumps operate when completely submerged in water. In wells with a depth of more than 8 meters, only equipment that must be selected taking into account their diameter can work.But it is quite applicable to pumping water from other sources. Its advantages: high pressure characteristics, versatility, quiet operation. The disadvantage can be considered the complexity of maintenance, for which the device must be pulled to the surface.

Well submersible pump for watering the garden Brook and its device

When installing surface-type pumps, their location should be chosen taking into account the suction depth, the value of which should not be less than the sum of the distance from the surface to the water surface and a quarter of the distance from the source to the pump.

Example. If the depth of the well is 4 meters, and the suction depth of the pump is 8 meters, then the distance between them should be no more than 16 meters: 8 \u003d 4 + 1/4x16.

Power type

The most convenient for operation are electric pumps powered by 220 V. By equipping them with a membrane tank, a pressure switch and a pressure gauge, you can equip automatic pump watering stations that will make irrigation of plantings comfortable for you and will reduce energy consumption.

If electricity has not yet been supplied to the site or is supplied intermittently, it makes sense to think about purchasing manual or gasoline units.

Piston and rod type hand pumps are manually actuated by means of a lever that raises and lowers a piston located inside a cylindrical housing.

Pumping water is faster and more convenient than carrying buckets from a well

Four-stroke engines are used in the design of gasoline pumps and motor pumps. They can supply water from a depth of up to 10 meters.

Motor pump with gasoline engine

Irrigation type

If you live outside the city and you have the opportunity to irrigate as needed, after collecting water in containers for warming up and settling, you just need to decide on the required amount of water for one-time irrigation and choose equipment that will provide the necessary pressure and flow. Instructions for the pump with technical parameters will help you with this.

The pump must provide enough pressure to operate the sprinklers

Many summer residents use two pumps at once: one submersible for lifting water from a well or well and filling containers, and the second surface directly for irrigation.

And if you visit the dacha on short trips and worry that the plants will wither in your absence, it is better to choose pumps for drip irrigation. Such systems save both water and electricity, and your time, although at first they are expensive.

A pumping station for watering a garden in this way includes a submersible pump installed in a well or well, equipped with automation. Using the timer, you need to set the frequency of watering and set the desired pressure mode on the relay. 1-2 bar is enough for the system to work normally, and even a simple inexpensive pump can provide such pressure.

Much more important is its reliability during cyclic operation. In other words, he must calmly endure periodic switching on and off. At the same time, keep in mind that if the debit of the well and the power of the water-lifting equipment do not match, it will have to be turned off more often in anticipation of a new flow of water, which will lead to faster wear.

It is also possible to equip the system with a storage tank installed on a hill, into which water will be pumped, heated, and then flow by gravity into the distribution pipeline.

submersible pump rating

The rating includes the best submersible pumps that have passed a rigorous selection. All models received high quality ratings from experts, a large percentage of positive feedback from ordinary users. The selection took into account compliance with the following key parameters:

• Power;
• Performance;
• Water level control;
• lifting height;
• transfer distance;
• Max pressure;
• destination category;
• Rated weight;
• Installation method;
• Protection against overheating, dry running;
• body material;
• Functionality;
• Noise level;
• Working temperature.

Safety characteristics, cost, warranty period were also taken into account. The pros and cons of each individual model were considered. As a result, the best nominees were divided into three application categories.

The best pumps to increase water pressure

drip tapes

Another type of irrigation system is tape. They are significantly cheaper than pipes equipped with droppers and do not require manual adjustment. Such designs are ideal for plantings of the same type: potato ridges, berries, tomato plantations.

The essence of the system is simple - watering is carried out using thin polyethylene sleeves with holes through which water enters. The quality of irrigation and the service life of the structure depend on the thickness of the plastic walls. The best option is a tape with walls of 0.2 mm.It is suitable for any planting, guaranteed to serve for several seasons, does not suffer from random stones, rodents and pests. Tapes with walls from 0.12 to 0.15 can be used for watering summer plants growing on soft soils. Usually such a system is changed after a couple of years.

Drip tapes are divided into several groups:

• slotted;
• labyrinth;

Slotted tapes are equipped with an internal labyrinth mechanism that reduces water pressure and its speed. The disadvantage of such systems is the need for thorough water filtration, small debris will quickly disable the tape. In order for the design to work smoothly, you can buy a filter and replace it in a timely manner.

Which drip irrigation system do you choose?

HoseTape

Labyrinth systems have a relief on the surface, it reduces the rate of water supply, promotes its uniform distribution and heating. This design is cheaper than the others, but the embossed tapes are easily damaged. In order for moisture to reach the roots, when laying the system, you need to monitor the location of the drip zone.

Emitter ribbons are the most convenient and modern option, suitable for any planting. Flat drippers are built into the holes of the tape, creating turbulence in the incoming water. This reduces the likelihood of blockages, the system is self-cleaning during operation. There are compensated and non-compensated options on sale, the former are intended for areas with difficult terrain, the latter are best used in greenhouses.

When choosing emitter tapes, it is necessary to evaluate the throughput of droppers. Universal option - consumption from 1 to 1.5 liters per hour. This mode is suitable for most crops and different types of soil.

Among the best tape drip systems, buyers note the following:

MasterProf Kapelka

Suitable for open ground and greenhouses, this low cost slotted belt system provides irrigation for 4 beds up to 10 m long. Water is supplied from a tank installed above ground level. The kit includes a drain hose, adapter, polyethylene tapes, taps, fasteners and plugs.

Smart Drop Standard

Emitter drip system for universal use. Suitable for connection to the water supply through a regular garden hose, provides high-quality watering of plants in the open field and greenhouses. The set includes 60 m of polyethylene tape, fittings, tee plugs and a tap for the main hose. The kit is designed for 300 plants, you do not need to buy additional parts.

Aqua Plus

Slotted drip tape suitable for greenhouses and open ground of any type, from sand to black soil. Can be used for watering vegetables, flower beds, berry plantations, garden trees and shrubs. Sold in coils up to 2300 m long, which makes it possible to design a system ideal for a particular site. Hole pitch - from 20 cm, water throughput - up to 1 liter per hour. The kit does not include taps, plugs and filters, they will have to be purchased separately.

When choosing a drip irrigation system, you need to take into account the characteristics of the crops grown, the availability of water supply, and the quality of the water. Beginning gardeners can purchase the simplest basic set and gradually improve it by purchasing the missing parts.

• Types of sprinklers for lawn irrigation: retractable and non-retractable, rotary, fan, impulse, oscillating and circular, how to choose the best one, an overview of popular models, their pros and cons
• How to choose a hose nozzle for irrigation: an overview of the most popular products, their advantages and disadvantages
• Types of pumps for garden irrigation: surface and submersible, how to choose the best one, rating of the best models and expert advice

Drip irrigation from a barrel

There are some nuances in this matter. For example, gardeners often notice that gravity flow is not a reliable and not intensive enough method of watering. And the pump is an add-on. spending. Therefore, there are several ways to speed up the process. One of them is to raise the barrel not by 1.5 meters, but by three. This technique will also help prevent stagnation, and as a result, the accumulation of plaque.

But inside the barrel, the litter can become many times larger, because due to the fact that it stands high, it is not always convenient to climb up in order to remove unnecessary filling. Therefore, the filter right inside the tank is an excellent solution. You can, of course, follow the example of some craftsmen, and use ordinary capron for this. But the factory filter is not so expensive.

The output of the pipe from the canister also has its own characteristics. It will be necessary to organize a tap, after which a filtration system, and then you will need an adapter made in the form of a 90 degree angle.

10 Dgmebonco

This device ended up at the end of our rating for only one reason - unlike other lots, it is not intended for small beds or indoor plants, but for full-fledged farms. In fact, this is the best drip irrigation system from Aliexpress. It is equipped with a powerful pump that allows you to spray a large amount of water. Settings allow you to set the frequency and speed of spraying, as well as distribute flows to different outlets.

But even if you are not a professional farmer, but your site has large beds or greenhouses, then this is the best choice that will do the job perfectly.The metal case and durable plastic from which the device is made make it durable and reliable, which completely eliminates the relatively high cost. In addition, for this price you get a whole irrigation kit, which includes not only hoses, but also sprayers that can be installed at any required distance.

Drip irrigation system

​

A water strider is a drip irrigation system for plants in greenhouses and open beds. It is connected to a barrel or summer water supply. Flexible hoses are located on the beds, a dropper is connected to each sprout, which provides uniform and economical moistening, excluding soil leaching and water ingress on plant leaves. The water meter works without electricity. The kit includes a convenient automatic controller, which sets the interval and duration of water supply. The timer allows you to select the exact time of continuous watering from 2 minutes to 2 hours with a specified frequency. The basic length of the irrigation system is 4 meters, an additional extension insert is 2 meters. The hoses are attached to the water supply or barrel using an adapter with a nut. To prevent dirt from entering the hose, the design provides for a mechanical water purification system.

Drip irrigation system

Rating of the best drainage pumps

All products before being included in the rating were compared according to various criteria. Here are the characteristics that were taken into account during product analysis:

• Type of device - submersible or surface;
• Power;
• Performance;
• Immersion depth;
• Type of water - clean or dirty;
• Operating pressure;
• Weight and dimensions;
• Installation methods;
• materials;
• Overheat protection;
• Multifunctionality - what tasks do the pumps cope with;
• Noise level;
• Length of cable;
• Permissible amount of impurities in water;
• Working temperature.

When selecting products, we also took into account the convenience of their use, safety of use, value for money.

The best food waste disposers

drip tapes

Another type of irrigation system is tape. They are significantly cheaper than pipes equipped with droppers and do not require manual adjustment. Such designs are ideal for plantings of the same type: potato ridges, berries, tomato plantations.

The essence of the system is simple - watering is carried out using thin polyethylene sleeves with holes through which water enters. The quality of irrigation and the service life of the structure depend on the thickness of the plastic walls. The best option is a tape with walls of 0.2 mm. It is suitable for any planting, guaranteed to serve for several seasons, does not suffer from random stones, rodents and pests. Tapes with walls from 0.12 to 0.15 can be used for watering summer plants growing on soft soils. Usually such a system is changed after a couple of years.

Drip tapes are divided into several groups:

• slotted;
• labyrinth;

Slotted tapes are equipped with an internal labyrinth mechanism that reduces water pressure and its speed. The disadvantage of such systems is the need for thorough water filtration, small debris will quickly disable the tape. In order for the design to work smoothly, you can buy a filter and replace it in a timely manner.

Which drip irrigation system do you choose?

HoseTape

Labyrinth systems have a relief on the surface, it reduces the rate of water supply, promotes its uniform distribution and heating.This design is cheaper than the others, but the embossed tapes are easily damaged. In order for moisture to reach the roots, when laying the system, you need to monitor the location of the drip zone.

Emitter ribbons are the most convenient and modern option, suitable for any planting. Flat drippers are built into the holes of the tape, creating turbulence in the incoming water. This reduces the likelihood of blockages, the system is self-cleaning during operation. There are compensated and non-compensated options on sale, the former are intended for areas with difficult terrain, the latter are best used in greenhouses.

When choosing emitter tapes, it is necessary to evaluate the throughput of droppers. Universal option - consumption from 1 to 1.5 liters per hour. This mode is suitable for most crops and different types of soil.

Among the best tape drip systems, buyers note the following:

MasterProf Kapelka

Suitable for open ground and greenhouses, this low cost slotted belt system provides irrigation for 4 beds up to 10 m long. Water is supplied from a tank installed above ground level. The kit includes a drain hose, adapter, polyethylene tapes, taps, fasteners and plugs.

Smart Drop Standard

Emitter drip system for universal use. Suitable for connection to the water supply through a regular garden hose, provides high-quality watering of plants in the open field and greenhouses. The set includes 60 m of polyethylene tape, fittings, tee plugs and a tap for the main hose. The kit is designed for 300 plants, you do not need to buy additional parts.

Aqua Plus

Slotted drip tape suitable for greenhouses and open ground of any type, from sand to black soil.Can be used for watering vegetables, flower beds, berry plantations, garden trees and shrubs. Sold in coils up to 2300 m long, which makes it possible to design a system ideal for a particular site. Hole pitch - from 20 cm, water throughput - up to 1 liter per hour. The kit does not include taps, plugs and filters, they will have to be purchased separately.

When choosing a drip irrigation system, you need to take into account the characteristics of the crops grown, the availability of water supply, and the quality of the water. Beginning gardeners can purchase the simplest basic set and gradually improve it by purchasing the missing parts.

• Types of sprinklers for lawn irrigation: retractable and non-retractable, rotary, fan, impulse, oscillating and circular, how to choose the best one, an overview of popular models, their pros and cons
• How to choose a hose nozzle for irrigation: an overview of the most popular products, their advantages and disadvantages
• Types of pumps for garden irrigation: surface and submersible, how to choose the best one, rating of the best models and expert advice

Fecal pumps

It will not be superfluous to consider the best fecal pumps, because. according to their characteristics, they are quite versatile, and can be used as drainage.

JILEX Fekalnik 230/8

The fecal pump DZHILEX Fekalnik 230/8 is a monoblock device with a lower water intake. It is used for pumping sewage, cesspools with solid particles up to 25 mm in diameter. It can also be used as a drainage, for watering a site with water intake from an open reservoir. The pre-filter prevents debris and particles larger than 25 mm from entering the pump section. Protected against dry running by a float switch. From overheating - a thermal protector and a heat exchange chamber.

Cost: from 3530 rubles.

JILEX Fekalnik 230/8
Advantages:

• solid assembly and resistance to corrosion;
• high throughput;
• works quietly.

Flaws:

• cases of poor fixation of the impeller;
• no cutting gear.

JILEX Fecal 330/12

The submersible fecal pump is designed for pumping heavily polluted wastewater with solids up to 35 mm. The model is equipped with an automatic float switch that prevents dry running. There is protection against overheating of the electric motor. Large capacity (19.8 m3 / h) allows you to quickly and efficiently roll back water from cesspools.

Cost: from 5240 rubles.

JILEX Fecal 330/12
Advantages:

• powerful and productive;
• reliable assembly and durable case;
• long network cable.

Flaws:

no cutting gear.

Storm! WP9775SW

Universal submersible pump. It can be used as a drainage for pumping out dirty water, and fecal - for pumping out a thick liquid. The grinding system makes it possible to roll back water with solids up to 35 mm, which, after grinding, will no longer be able to clog the drainage system. Cast iron housing is durable and increases pump life. Autonomous operation is possible, which is provided by a float switch.

Cost: from 7390 rubles.

Storm! WP9775SW
Advantages:

• the presence of a cutting nozzle;
• heavy and stable;
• durable cast iron body;
• powerful.

Flaws:

• heavy (18.9 kg);
• the knife is clogged with hair;
• short cord.

VORTEX FN-250

Submersible fecal pump with a centrifugal motor, designed for pumping dirty and heavily polluted water with solids up to 27 mm, fecal matter. The electric motor is equipped with a built-in overheating protection system in the form of a thermal protector.In addition, it is cooled by the pumped liquid. The float switch eliminates dry running. Despite the low power, the throughput reaches 9 m3 / h, the maximum head is 7.5 m.

The cost is from 5200 rubles.

VORTEX FN-250
Advantages:

• high efficiency with low power;
• metal case;
• can work both stationary and be transferred to the required place.

Flaws:

• short cord 6 m;
• no grinder.

UNIPUMP FEKAPUMP V750 F

This pump model can be used for pumping dirty water with solid particles up to 25 mm, as well as fibrous inclusions. The scope is not limited to domestic sewage, it is also used at construction and agricultural facilities. The motor is located in a stainless steel casing and is protected from overheating by a built-in thermal relay. The change in the level of the pumped liquid is monitored by a float switch, which is responsible for automatically turning the pump on and off. The model has high performance characteristics: 18 m3 / h - maximum throughput, 10 m - maximum pressure.

Cost: from 8770 rubles.

UNIPUMP FEKAPUMP V750 F
Advantages:

• quality assembly;
• quiet work.

Flaws:

not found.

Comparison of technical characteristics of fecal pumps

Pump Model	Diving depth (m)	Max head (m)	Throughput (m3/h)	Filtered particle size (mm)	Power consumption (W)
JILEX Fekalnik 230/8	8	8	13,8	25	590
JILEX Fecal 330/12	8	12	19,8	35	1200
Storm! WP9775SW	5	11	18	35	750
VORTEX FN-250	9	7,5	9	27	250
UNIPUMP FEKAPUMP V750 F	5	10	18	25	750

Having reviewed 16 pumps in the category of drainage and drainage-faecal, it is safe to say that there is plenty to choose from.

It is important that the pump is not bought at random: without taking into account the technical capabilities and operating conditions. Here the proverb will be in place: measure seven times, cut one

After all, even the best pump, under improperly selected operating conditions, can produce a minimum performance. We hope that our advice on choosing a pump and the models reviewed will make your choice easier.

Best Dirty Water Pumps

Such models are designed to work in a heterogeneous environment. They are characterized by high performance and can pump water containing solids. Such pumps are used for cleaning cesspools or sewers.

Caliber NPTs-1400U Aqua Line

4.9

★★★★★editorial score

96%
buyers recommend this product

The model is made in a plastic case with a stainless steel insert. This allows it to function stably under the influence of aggressive environments for a long time.

The ergonomic handle and stable stand make it easy to transport and place the pump on the surface.

Productivity is 25,000 liters per hour with a power of 1400 watts. A float switch prevents the unit from running without water. Thermal protection elements are mounted in the stator winding, which prevent the motor from overheating during prolonged activity.

Advantages:

• ease of carrying;
• powerful engine;
• stable work;
• cable length - 10 meters;
• high protection class.

Flaws:

noisy.

The NPTs-1400U Aqua Line caliber should be purchased for use in sewers. It is designed for pumping water with solid inclusions with a diameter of not more than 40 mm.

Quattro Elementi Drenaggio 1300 F Grande

4.9

★★★★★editorial score

93%
buyers recommend this product

The high performance of the model is provided by a 1300 W motor. The pump is capable of efficiently pumping water containing particles up to 40 mm in diameter. The pumping speed can reach 416 liters per minute, the permissible lifting height is 11 meters.

The cable length of 10 meters significantly expands its coverage area. IPX8 protection class eliminates the risk of moisture on electrical components.

The plastic body is not affected by corrosion, and the extended base part guarantees the stability of the unit on any surface. The U-shaped handle just makes it easier to transport.

Advantages:

• powerful engine;
• stability;
• durability;
• convenient hose connection.

Flaws:

the complexity of the repair.

The Drenaggio 1300 F Grande is worth buying for pumping large volumes of dirty water in a short time.

Gileks 230/8

4.8

★★★★★editorial score

91%
buyers recommend this product

The model is equipped with a handle for ease of transportation and diving. The presence of a float switch with a regulator allows the unit to function automatically and extends its service life. The 7 meter long cable provides ease of use at a distance from the mains. The height of the water rise is 8 m.

Engine power - 590 watts. It has overheating protection and works stably under high load. The pump is capable of distilling liquid containing particles with a diameter of up to 25 mm, which makes it possible to use it in a highly polluted environment.

Advantages:

• serviceability;
• long cable length;
• high performance;
• automatic operation;
• long service life.

Flaws:

no cutting blade.

Dzhileks 230/8 is designed for pumping wastewater. An excellent choice when you need to drain a basement or excavation.

Patriot F 400

4.7

★★★★★editorial score

87%
buyers recommend this product

The universal nozzle of this pump allows you to securely fix the hose with a diameter of 25 to 38 mm. The compact dimensions make it easy to store and transport the model. The maximum immersion depth of the unit is 5 meters. Motor power - 400 watts.

The weight of the device is only 3.6 kilograms. The housing is made of hard plastic and is not subject to corrosion.

The suction holes at the bottom are designed to take in water with a solid content of up to 35 millimeters. Automatic blocking protects the motor from "dry running".

Advantages:

• compactness;
• wide suction openings;
• low price;
• economical energy consumption;
• long power cable.

Flaws:

lack of fixation of the float.

The Patriot F 400 is recommended for pumping heavily polluted water. An affordable solution when draining canals or basements is required.

Irrigation system Gardena (Gardena)

This is a multi-component system with different types of droppers and irrigation devices. There are devices specifically for drip irrigation, there are sprinklers of various devices and types. Drip irrigation "Gardena" is produced in Germany.

These devices work from the water supply (including from the pumping station) and have their own filters that lower and stabilize the pressure in the system. The pressure stabilization device is called the "Master Block", they are designed to supply 1000 l / h or 2000 l / h. A distribution hose is connected to them, to which various devices for supplying water to plants are then mounted.

To connect the pieces of hose, unique fittings are used, into which the hose is simply inserted. It is fixed with a special spring, ensuring tightness. If necessary, the connection is disconnected by pressing a special lever, the hose is released from the clamp and removed.

For drip irrigation, there are droppers of the following types:

• with a fixed flow rate of 2 and 4 l/h;
• self-regulating at 2 l / h, allowing you to supply the same amount of water throughout the irrigation line;
• internal - inserted into the gap of the hose with a fixed water flow;
• with adjustable supply from 0 to 20 l / h - terminal and internal

For more information about the Gardena drip irrigation and irrigation system, see the video.

Which to choose?

The pump should be compact simple and convenient

Submersible or outdoor

The desire to save money is quite natural, especially when the salary resembles change at the supermarket checkout. Even if this is the case in your case, then the principle “what is cheaper is better” does not apply to choosing the right unit. Which pump is better - submersible or external? Each of them has its own advantages and disadvantages, but, most importantly, each has its own characteristics.

Let's define the area first. There are important questions that need to be answered, where the table will help.

Conditions in which the pump will be used

Surface

Submersible/drainage

With the help of the pump, only watering will be carried out, or it will also be used in order to gain capacity.

It can be used both for pumping containers and for watering the garden.

Same.

How many meters from the water source to the tank.

Depending on the power, it is capable of pumping water for tens of meters, only it must be located close to the water source. This is due to the fact that the length of the suction hose should be no more than 9 m. If it was planned to install it on your site, and stretch several tens of meters of the hose to the water source, then this will not work.

The distance that the pump can pump water depends on its power and design features. Drainage can be with a grinder, so it will grind small debris. The unit must be immersed in water, at least at the bottom. For submersible operation, a depth of about 1 m is needed.

What is the distance from the source of water intake to the farthest point on your site, and what is its volume.

Usually the manufacturer indicates how far the pump is able to supply water.

You need to have some power reserve, because it may happen that you will water the far section of the garden longer than the scheduled time, since the pressure will be very weak.

Same.

If the site is hilly, then where will the water be supplied - up or down.

If the site is hilly, it is important to consider that a 1 m rise in the water column will reduce the delivery distance by 10 m with a 1 inch hose diameter. When the liquid is fed down, it can flow by gravity

In this case, a powerful pump is not needed.

Same.

The type of irrigation selected (drip, under the root, sprinkler, etc.).

When watering at the root, you don’t need to stand above the hose - it can be shifted to a new place from time to time, so a large pressure that can erode the roots of the plant is not needed. The sprinkler will not work effectively with low pressure, so the equipment must be powerful enough.For drip irrigation systems, an automated system is used to maintain the required pressure in the system.

Same.

Noise level.

The noise level is very high, but it can be reduced by a rubber lining or if installed in a shed, but this is not always possible due to the limitation of the length of the suction hose.

The pump itself is not noisy, when it works in water, it is almost inaudible.

The need for a filter.

A filter is needed in all cases where there is a possibility of debris getting into the pump impeller. In addition, a check valve is required.

The drain pump does not need a filter - the lower grate can act as a limiter, preventing large particles of debris from passing through. When using a submersible pump (rotary or vibratory) good filtration is required.

Having decided on the type, we will figure out how to choose the right device for power.

9 Smart Irrigation Sprinkler

Controlling electrical appliances from a smartphone has not been surprising or shocking for a long time. And now you can even water your houseplants using a dedicated phone app. This device has many settings, including the intensity and frequency of watering, as well as the layout of the inclusion. And all this is configured in a simple and intuitive mobile application. By the way, the simplicity of the application is a very important factor, since it does not have a translation into Russian. But even if you do not know English, there will be no problems. Everything is intuitive and accessible to any user.

The device is equipped with a built-in pump, that is, it consumes liquid not flowing, but from a container. In the application, you can set how much water to apply to the soil and at what time to do it.The kit comes with hoses and splitters, but there is only one outlet, so if you use the device for watering several plants, you should calculate the amount of fluid given off based on the total number of pots.