Rating of the best compact gas heaters: TOP 10 models and advice to customers on choosing

In conclusion, a useful video

Our review of the best gas heaters of 2020 is nearing completion. We have tried to collect for you the most information on each model, so that you can decide which of the presented designs will be the most suitable. If you still have questions about any of the models, or if you just want to share your experience in using such equipment, then welcome to comment on this article.

How to heat a house, a cottage. Gas heaters and Electric heaters, convectors!

Watch this video on YouTube

Gas infrared heater. Budget heating of a garage or construction site.

Watch this video on YouTube

Efficient use of the instrument

When operating gas units, two serious hazards must be taken into account, such as the possibility of poisoning by products of gas fuel processing and explosion. That is why you should never neglect the scrupulous study of the instruction manual and the fulfillment of all its requirements.

Modern columns with a mechanical control system are usually very easy to operate, if the settings are set correctly, the device will supply a stable flow of enough hot water

To ensure sufficient draft for the normal functioning of the column, care should be taken to ensure a constant supply of air to the room equipped with the device. Plastic windows reliably block the paths of air flow.

The installation and connection of the column, its maintenance and the necessary repair procedures must be carried out by an employee of the gas industry, amateur performance in these matters can seriously harm

In order for the column to work normally, it makes sense to arrange a suitable ventilation option. Before turning on the column, a draft test is considered mandatory.

It is best to use thin paper for this, rather than matches or a lighter. If gas has accumulated inside the housing due to a breakdown, it may explode.

The presence of sufficient traction can be judged by the flame on the igniter: if the tongue deviates towards the chimney channel, then there is traction. But it is safer to use not fire, but thin paper for testing.

It is important to understand that the unauthorized installation of a gas column is fraught not only with the accrual of fines, but also with much more serious consequences. You can not repair a broken column yourself or make your own changes to the design

This could lead to a possible gas leak and subsequent explosion.

You cannot repair a broken column yourself or make your own changes to the design. This could lead to a possible gas leak and subsequent explosion.

The heat exchanger becomes clogged with scale over time and has to be cleaned periodically.

Improper use of the geyser can lead to its pollution. To restore normal operation of the unit, it must be cleaned

In order for this process to occur as slowly as possible, you need to correctly set the heating temperature. The higher it is, the more scale. The maximum recommended indicator is 55 ° С.

If the column does not light up due to low water pressure, it may be time to clean or replace the water pipes. It is best to take care of this even before buying and installing the device.

Some speakers do not turn on immediately because there is no water inside. First, open the water tap to fill the circuit, and then ignite the gas.

It does not hurt to pre-drain a certain amount of water and remove the accumulated air.

3 Almac IK11

A popular model of ceiling heater is Almac IK11. The heating power is 1000 W, and the maximum service area is 20 m2. feature infrared heater is ceiling mounting. Attached to the ceiling, thereby saving space in the room. Also, ceiling mounting is safer, it is good to use it in children's rooms. The only disadvantage of the ceiling location of the heater is that it primarily heats the objects closest to itself, respectively, the human head receives more heat than the legs.

The thickness of the heater is only 3 cm, it is almost invisible, harmoniously fits into the interior of apartments, unlike floor and wall models. At the same time, the heat from it is very soft and pleasant, similar to stove heating. There are many reviews about the model, most users are satisfied with the device, but they recommend automating its operation, using it in conjunction with a thermostat to maintain the optimum temperature and save energy.

Pros:

• easy installation;
• fast heating;
• doesn't make noise.

Minuses:

no wall brackets.

Which heater is best?

There are several types of heaters: infrared, convector, oil radiators, thermal fans. The main criteria when choosing a heater are its safety, ease of use, efficiency and economy.

To choose the best heater for your space, it is important to know the advantages and disadvantages of each type of device.

Heater type	Advantages	Flaws
Infrared heater	+ Most economical + Absolutely silent + Do not reduce humidity and oxygen content in the room + Instant air heating + Best option for the bathroom + Low wear	- Limited heat spot (heats not throughout the room) - The high cost of the system (if you want to make heating the entire apartment) - Not recommended for use in rooms with low ceilings (infrared rays can affect a person's well-being)
Convector	+ Easy installation + Compact dimensions + Simple controls + Beautiful design + Affordable price + High efficiency	- Dries the air. Need to get a humidifier - Suitable for heating small areas
Oil radiator	+ Mobility (can be moved at any time) + Fire safety + Environmentally friendly heating + Suitable for continuous heating + Do not dry out the air + Affordable price + Silent operation	- long heating time - Takes up valuable space in the room
Thermal fan	+ Rapid room heating + Compact dimensions + Can be used as a fan + Suitable for heating large areas (heat gun)	- High noise during operation - Dries the air - Raises dust in the room

Recommendations for choosing a unit

When choosing a column, you need to take into account many parameters, we will designate the main ones.

Performance, i.e. the ability of the device to produce a certain volume of hot water prepared for supply to the water intake for a specific unit of time.

Some owners have encountered an unpleasant phenomenon. When two taps were opened at the same time, for example, in the kitchen and in the bathroom, there was not enough water.

A compact wall-mounted model of a gas column is the most popular version of such a heater. It is small in size and fits well into almost any interior.

This is due to insufficient performance. For the situation described, a device that delivers about 10 l / min is suitable. Most of the geysers from the presented rating of reliability and quality in terms of performance correspond to this level.

Small dimensions make it easy to find a suitable place for installing a gas heater. Most often, such devices are placed in the kitchen or in the bathroom.

Camera type. Devices equipped with a closed chamber are usually several times more expensive than conventional devices with an open chamber.The latter can only be installed in houses where a chimney is already provided for this.

In closed chambers, exhaust gases are forced to be removed thanks to the built-in turbine. It makes sense to spend money on such an expensive purchase only when there is nothing else left, because it is most convenient to use gas to heat water.

The compact coaxial chimney is very easy to install, it helps to solve the problem of removing combustion products and supplying oxygen to the boiler of an independent heating system and hot water preparation

Method for regulating gas consumption. The most convenient in this regard are devices equipped with a device for simulating a burner flame. In such a model, it is enough to set the appropriate settings once, and the water temperature will remain comfortable, regardless of the pressure or temperature changes of cold water in the system.

But devices with such a function are quite expensive. Those on a tight budget will have to choose from models with smooth or stepped adjustment.

You will need to set the settings almost before each use of hot water. Usually the temperature is made higher, and then it is regulated by mixing cold water into the stream.

Connecting a flowing gas water heater is best done directly, and not through adapters. Before buying, you need to check the diameter of the connecting elements and compare them with the dimensions of gas and water pipes.

Dimensions of the device and method of installation. The most popular models are usually small, wall-mounted and vertical. If the location for the column has already been selected, you should familiarize yourself with the requirements of the manufacturer. Perhaps the device cannot be installed close to a cabinet, wall and other objects, a certain clearance must be provided.

The presence of a display that reflects the status of the column and the temperature of the water flow is very desirable, but not necessary for the normal operation of the device

Additional factors. It is necessary to remember such points as the compatibility of the selected model with the existing communications to which it will be connected, as well as the availability of service centers and the specifics of fulfilling warranty obligations.

Problems with installation and warranty are typical for some imported devices.

The best flow geysers with an open chamber

Water heaters with an open combustion chamber are installed in rooms with a chimney and good ventilation.

As a rule, these are the simplest speakers without control automation that do not need to be connected to electricity. However, among them there are more advanced devices.

Mora Vega 10E - economical and reliable

4.8

★★★★★
editorial score

89%
buyers recommend this product

See review

The columns of the Czech manufacturer are equipped with German fittings Mertik, which automatically maintains the flow temperature during pressure drops and heats the water even at a low pressure of 2.5 l / min.

The diameter of the heat exchanger tubes is 18 mm. But inside there are special turbulators that prevent the formation of scale on the inner walls.

Advantages:

• High efficiency (up to 92%);
• Smooth power regulation;
• Automatic maintenance of temperature in case of pressure drops in the system;
• Low noise level;
• Fast heating.

Flaws:

High price (about 20 thousand rubles).

The Mora Vega column is designed for one point of water intake and can be installed in houses with a small consumption of hot water, where one or two people live.

Baxi Sig-2 14i - Italian quality

4.6

★★★★★
editorial score

86%
buyers recommend this product

The column of the Italian brand produces about 14 liters of hot water per minute. The equipment is equipped with an LCD display showing the current temperature.

The heat exchanger is made of copper and additionally protected by an anti-corrosion coating. The water assembly is made of brass, the burner is made of stainless steel. All materials used are designed for a long service life.

Advantages:

• High quality heat exchanger;
• Convenient temperature control;
• It ignites even with low water pressure;
• Smooth adjustment of the burner flame.

Flaws:

The temperature sensor sometimes lies.

Water analysis from Baxi Sig can also be arranged for two taps at the same time (for example, a sink in the kitchen and a shower). However, the power of the column is hardly enough to get enough hot water at both points. This model is suitable for a family of 2-3 people - no more.

Zanussi GWH 10 Fonte Glass – modern bright

4.3

★★★★★
editorial score

84%
buyers recommend this product

The top panel of the Glass series speakers is made of heat-resistant glass-ceramic with spectacular photo prints and an anti-vandal coating.

The manufacturer offers seven options for case design: from Italian classics to dynamic high-tech. As for the technical parameters and operation of the water heater, here we can safely talk about the optimal combination of price and quality.

Advantages:

• Low noise level;
• The design of the collector eliminates the leakage of carbon monoxide;
• Stylish design;
• Fast heating;
• Stable maintenance of the desired temperature.

Flaws:

Uneven heating.

The column can be installed in a spacious bathroom with a window or in the kitchen, since it is designed for one water intake point.This model is suitable for bachelors and couples who live separately from children.

The best converter-type heaters

Xiaomi Smartmi Chi Meters Heater

Convector type heater, made in a minimalist style. The heating element (2 kW) reaches its maximum power in just 72 seconds. The device quickly raises the temperature of the air. 2 operating modes optimize device performance and reduce power consumption. The convector is protected against overheating and overturning.

Model Features:

• the principle of operation of the device: cold air masses, coming from below, heat up and rise up. This allows you to achieve not only fast, but also uniform heating of the air;
• fast heating;
• the ability to adjust the power;
• silent operation. You can use the device at night without fear of waking your family;
• durable housing made of 0.6 mm galvanized sheets, resistant to mechanical damage and corrosion;
• safety of all materials. The heater does not emit hazardous compounds during operation;
• compact dimensions (680x445x200 mm), laconic design, which allows you to easily fit the device into the interior, designed in any style.

Advantages:

• Beautiful design;
• no noise;
• light weight;
• the possibility of heating a large room.

Minus: the need to buy an adapter for the plug.

Thermor Evidence 2 Elec 1500

Floor convector, designed for space heating up to 15 "squares". Thanks to its splash protection, it can be installed in damp rooms. The built-in thermostat maintains the set temperature. Brackets are supplied with which you can hang the device on the wall. The device does not dry out the air in the room. Electronic control.

Design features:

• power 1500 W;
• light indication of heating;
• no need for grounding due to reliable electrical protection;
• automatic shutdown in case of overheating;
• frost protection, which allows you to buy this model for use in the country;
• the ability to connect several heaters into a single system;
• safe closed heating element;
• ease of installation and maintenance.

Advantages:

• high quality performance;
• overheating protection, safety;
• rapid heating;
• resistance to network fluctuations;
• several operating modes;
• good build.

Disadvantage: inconvenient switch.

Electrolux ECH/AG2-1500T

Model from Electrolux for wall mounting with a heating element of 1500 W, designed for heating an area up to 20 m2. The moisture-proof case allows to use a heater in rooms with the increased humidity. There is also an overheating protection with automatic shutdown. It is possible to control from a mobile gadget:

• function check;
• setting automatic on-off;
• setting the desired air temperature by hours and days (for example, on weekends when the whole family is at home).

Manual control is also possible.

Advantages:

• compactness;
• safety;
• simple installation (the weight of the convector is only 3.2 kg);
• moderate cost.

There are no disadvantages.

Scarlett SCA H VER 14 1500

Stylish convector heater from Chinese manufacturers, equally suitable for home and office use. The power of the device is enough to heat a room up to 18 m2. Floor or wall installation of a heater is possible.

Peculiarities:

• 2 power modes: 1500 and 750 W, which allows you to maintain the optimum temperature in the room;
• protection against overheating and overturning with automatic shutdown;
• mechanical temperature sensor to maintain the set mode.

Advantages:

• compact dimensions;
• rapid heating;
• economical use of electricity;
• operation mode indication;
• overheat protection;
• convenient management;
• Beautiful design.

There are no cons.

Ballu BIHP/R-1000

Inexpensive convector-type heater for an apartment or small office, designed for 15 m2. The heating element consists of 2 aluminum alloy plates with a special coating. The design provides 2 power levels: 1000 and 500 W. Mechanical temperature control. The built-in thermostat maintains the set temperature. The unit is equipped with wheels. There are 2 options for installing the device: wall or floor.

Advantages:

• reliable protection against moisture and dust;
• Beautiful design;
• very simple control;
• mobility;
• profitability;
• relatively low price.

There are no negative reviews.

The best wall mounted gas heaters

Wall-mounted gas heaters are used in apartments and houses, as a rule, as the main source of heating. They replace heating radiators, perfectly coping with the task of providing heat indoors. Convection-type installations are more often wall-mounted.

Hosseven HS-8

5.0

★★★★★
editorial score

100%
buyers recommend this product

Hosseven gas heaters are modern, stylish equipment with high power output.

The steel body of the units in a glossy finish has glass with a panoramic view of the flame, which makes it look like a real fireplace.Productivity of a heater provides heating of rooms up to 69 sq.m. m.

Hosseven HS-8 has a built-in thermostat that keeps the temperature at a comfortable level. Adjustment can be carried out within 7 modes. In addition, the heater allows you to turn off the gas supply, but leave the pilot burner running for decorative purposes.

Advantages:

• Unique design with panoramic glass;
• Fireplace mode without heating;
• Thermostat;
• Electric ignition;
• Silent operation.

Flaws:

High price.

The heater-electric fireplace Hosseven HS-8 will not only effectively heat the room, but also decorate it, creating an atmosphere of comfort.

Alpine Air NGS-20F

5.0

★★★★★
editorial score

96%
buyers recommend this product

Alpine Air's NGS-20F is a wall-mounted gas heater with a cast iron heat exchanger, capable of running on LPG and domestic fuels. It is equipped with a fan that provides faster heating of the room.

The device is equipped with a thermostat that allows you to adjust and maintain a comfortable temperature.

The heater has automatic problem diagnosis and an electronic ignition system. The kit includes a compact coaxial pipe for the removal of combustion products.

The device has protection against freezing and overheating, equipped with electrically independent gas equipment.

Advantages:

• High strength heat exchanger;
• Built-in fan;
• thermostat;
• Autodiagnostics;
• Electrical independence of gas equipment;
• Electronic piezo ignition.

Flaws:

The fan is noisy.

The NGS-20F heater from Alpine Air is designed to heat a room up to 22 square meters. m.

Feg Euro GF

4.9

★★★★★
editorial score

90%
buyers recommend this product

Feg's Euro GF gas heater series features a patented dual heat exchanger design for faster air convection.

The perforated casing of the units gives them a unique design and additionally contributes to the rapid flow of heated air into the room. The heater is able to automatically maintain the temperature within 13-38 °C.

Thanks to the coaxial chimney, the device does not burn oxygen, and the absence of a built-in fan ensures quiet operation.

The heat exchanger has a galvanized coating, which ensures the durability of the heater, and heat-resistant enamel, which does not deteriorate even at +1100 °C.

Advantages:

• Dual heat exchanger;
• Fast heating;
• Temperature maintenance;
• Quiet operation;
• Heat resistant enamel.

Flaws:

Dust settles on the perforated casing, which is difficult to clean.

Compact but highly efficient Euro GF heaters are ideal for domestic use.

Karma Beta 5 Mechanic

4.7

★★★★★
editorial score

84%
buyers recommend this product

The gas heater "Beta 5" from Karma has a mechanical control, which provides a more affordable price. It is equipped with a steel heat exchanger made of high-alloy metal, which is highly resistant to wear.

The heaters of this series are very powerful - they are able to heat up to 100 square meters. m of premises. At the same time, they do not burn oxygen and work silently, do not require connection to the mains.

Advantages:

• High work power;
• Efficiency 87–92%;
• high quality heat exchanger;
• Coaxial chimney included;
• Universal design;
• Relatively low price.

Flaws:

There is no carbon dioxide level sensor.

With a discreet design, Beta Mechanic is suitable for any style of interior.Given the high power of the devices, they can be used to heat large spaces, including public places and offices.